Effect of Ball Milling on Mechnical Alloying of MoSi_2 AITranslate
Abstract AITranslate
The mixture of Mo and Si powders was milled by mechanical ball milling.The effect of ball milling technology on mechanical alloying of MoSi 2 was systematically investigated.The results showed that MoSi 2(t) Was more easily formed by hard alloy ball milling than stainless steel ball when the ball to powder mass ratio was 5∶1,10∶1 and 30∶1.The time of the formation of MoSi 2 Was the same with two different ball milling medium when the ball to powder mass ratiowas 20∶1
KeyWords AITranslate
1柳林,秦勇.球磨能量对Mo－Si混合粉末机械合金化的影响[J].金属学报,1996,32(4):423-428. 被引量：11
2F. H.(Sam) Froes,C. Suryanarayana,and D. Mukhopadhyay (Institute for Materials and Advanced Processes (IMAP), University of Idaho,Moscow, ID 83844-3026, USA)C-G. Li(BlM, P.O. Box 81 , Beijing, 100095, P.R. CHINA)K. Brand(On leave from Institut fur Werkst.SYNTHESIS OF INTERMETALLICS BY MECHANICAL ALLOYING[J].金属学报：英文版,1995,8(Z1):441-446. 被引量：10
1刘昕,夏志东,雷永平,史耀武.球磨条件对Sn-0.7Cu合金形成的影响[J].焊接学报,2005,26(5):9-12. 被引量：3
2左可胜,席生岐,周敬恩.Mo-Si二元粉末机械合金化及其热力学分析[J].西安交通大学学报,2006,40(9):1062-1065.
1陈鼎,吴薇,陈振华,傅定发,陈刚.Preparation for intermetallic powders of Cu-Sn and Cu-Ni-Sn systems via solid-liquid reaction milling technique[J].中国有色金属学会会刊：英文版,2007,17(A02):594-598.
2张宏,汤文明,吴玉程,郑治祥.机械合金化合成Sn-Cu二元合金粉体[J].材料热处理学报,2010,31(11):27-32. 被引量：2
3李艳春,宋美慧,张煜,李岩,张伟君,王阳.球磨工艺对钛合金粉末颗粒尺寸的影响[J].化学工程师,2017,31(6):13-15. 被引量：2
1张厚安,王德志,刘心宇.稀土在MoSi_2合成中的作用[J].粉末冶金技术,1998,16(4):256-259. 被引量：8
2铁生年,苗瑞雪.钼铁中Mo,Si,Cu的X射线荧光光谱分析[J].冶金分析,1999,19(5):53-54. 被引量：9
3王开阳,沈同德,王景唐,全明秀.球磨法制备钛纳米晶[J].金属学报,1993,29(7). 被引量：3
4曹嘉新,王兴庆.硬质合金生产工艺对其性能和组织的影响[J].铸造工程．造型材料,2001,25(2):39-40. 被引量：4
5尚青亮,张玮,刘捷,周林,方树铭.高能球磨制备片状锌粉工艺研究[J].云南冶金,2017,46(2):105-111. 被引量：3
6江涛勇.复吹转炉冶炼45钢的实践[J].炼钢,2004,20(6):18-20. 被引量：1
7刘宁,刘灿楼,赵兴中,胡镇华,崔昆,朱绍峰.Mo、Ni含量与Ti(C,N)基金属陶瓷组织和性能之间的关系[J].硬质合金,1994,11(2):74-78. 被引量：28
8陈德敏.一种行之有效的合成非晶态合金的方法—机械合金化法[J].辽宁冶金,1997(5):57-59.
9康润明.中小型球磨机用磨球的材质[J].河北机械,1993(3):13-14.
10胡家璜.提高铬钢的机械性能[J].中国钼业,1990,0(1):64-64.
Basic Information:
DOI：
Chinese Library Classification Number:TF123.11[冶金工程—粉末冶金]
Citation Information:
The mixture of Mo and Si powders was milled by mechanical ball milling.The effect of ball milling technology on mechanical alloying of MoSi 2 was systematically investigated.The results showed that MoSi 2(t) Was more easily formed by hard alloy ball milling than stainless steel ball when the ball to powder mass ratio was 5∶1,10∶1 and 30∶1.The time of the formation of MoSi 2 Was the same with two different ball milling medium when the ball to powder mass ratiowas 20∶1
quote
| GB/T 7714-2015 | [1] WANG De-zhi, ZHANG Hou-an, LIU Xin-yu, et al. Effect of Ball Milling on Mechnical Alloying of MoSi_2[J]. Rare Metals and Cemented Carbides, 2001(2): 15-19. |
| MLA | [1] WANG De-zhi, et al., "Effect of Ball Milling on Mechnical Alloying of MoSi_2." Rare Metals and Cemented Carbides, no. 2, 2001, pp. 15-19. |
| APA | [1] WANG De-zhi, ZHANG Hou-an, LIU Xin-yu, & ZUO Tie-yong. (2001). Effect of Ball Milling on Mechnical Alloying of MoSi_2. Rare Metals and Cemented Carbides(2), 15-19. |
| IEEE | [1] WANG De-zhi, ZHANG Hou-an, LIU Xin-yu, and ZUO Tie-yong, "Effect of Ball Milling on Mechnical Alloying of MoSi_2," Rare Metals and Cemented Carbides, no. 2, pp. 15-19, 2001. keywords: {MoSi 2;mechanical alloying;ball milling} |