daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effects of pH Value on Co-precipitation of Nano-size ITO Powder AITranslate

School of Materials Science and Engineering, Central South University;School of Materials Science and Engineering, Central South University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

In this paper,study is made of the effects of pH value on co-precipitation of nano-size ITO powder,and characterization analysis is made by TEM and XRD. The results show that co-precipitation is done at pH value 2.8-4.1. When pH= 9 at precipitation end, the powder is characterized by smallest grain size, largest specific surface area, lowest agglomeration factor, uniform particle distribution, good single dispersion property without agglomeration. When pH value is too low, the incomplete precipitation occurs, resulting in material loss. However, when pH is too high, the grain size becomes larger,affecting specific surface area and other relevant properties.

KeyWords AITranslate

ITO powder pH value preparation

1陈世柱,尹忠民,黄伯云,胡林轩.用喷雾燃烧法制备ITO纳米级粉末的研究[J].有色金属,2000,52(2):88-90. 被引量:40

2陈世柱,尹志民.快速制备纳米级金属氧化物的喷雾燃烧法[J].湖南有色金属,1998,14(1):24-27. 被引量:13

3初国强,王子君,赵家民,刘毅南,刘云,刘星元,王立军.氧离子辅助法沉积ITO透明导电膜的研究[J].光学精密工程,2001,9(2):169-173. 被引量:4

4史济群,周京英,马稚尧,马洪磊.电子束法沉积 ITO 透明导电膜的研究[J].华中理工大学学报,1998,26(3):10-12. 被引量:9

5高愈尊,李永洪,张泰宋.铟锡氧化物纳米粉的显微结构[J].中国有色金属学报,1998,8(2):278-281. 被引量:11

6王惠玲,齐永秀,张景香.粒径均匀的氧化铟粉末的研制[J].无机盐工业,2002,34(4):9-10. 被引量:17

7吕志伟,陈志飞,姚吉升.纳米ITO粉体的制备及其性能表征[J].矿冶工程,2004,24(3):70-72. 被引量:15

8黄杏芳,沈晓冬,崔升,李凤雷.纳米铟锡氧化物粉体的制备及表面改性[J].无机盐工业,2004,36(1):24-25. 被引量:18

9张艳峰,张久兴.化学共沉淀法制备纳米ITO粉体及结构表征[J].功能材料,2003,34(5):573-574. 被引量:13

10Sanchuan Tang, et al. Preparation of indium tin oxide(ITO) with a single-phase structure[J].Journal of Materials Processing Technology, 2003,137 : 82.

1朱协彬,段学臣,陈海清.3种分散剂对ITO浆料稳定性能的影响[J].中国有色金属学报,2007,17(1):161-165. 被引量:12

2朱协彬,段学臣,陈海清.MC对ITO水相浆料的稳定作用及其分散机理[J].中南大学学报:自然科学版,2007,38(4):612-616. 被引量:2

3黎铉海,魏坤,梁信源.化学液相共沉淀法制备ITO纳米粉体的工艺研究[J].金属矿山,2008(9):73-77. 被引量:3

4黎铉海,魏坤,梁信源.化学液相共沉淀法制备ITO纳米粉体的新工艺研究[J].化工技术与开发,2008,37(10):1-6. 被引量:1

5张楠,刘家祥,吴妲.分散剂对ITO前驱物浆料稳定性的影响[J].稀有金属材料与工程,2009,38(6):1033-1037. 被引量:4

6房师阁,刘玲,马壮,郝红蕊.纳米级锆酸钐的合成工艺研究[J].人工晶体学报,2013,42(6):1187-1191. 被引量:1

7李艳玲,邓卫华,冀克俭,朱杉,赵晓刚,周彤,高岩立.ITO成分分析标准物质的研制[J].化学分析计量,2016,25(2):8-11. 被引量:1

1毛凌波,张仁元,柯秀芳.纳米铜粉在太阳能集热器循环工质中的分散[J].有色金属,2010,62(1):22-26. 被引量:5

2朱协彬,段学臣,陈海清.MC对ITO水相浆料的稳定作用及其分散机理[J].中南大学学报:自然科学版,2007,38(4):612-616. 被引量:2

3单达文,饶平根,陈国安,张松周.Al2O3料浆流变性能的研究[J].中国陶瓷,2009(3):50-52. 被引量:1

4刘月,路福绥,陈甜甜.20%灭幼脲水悬浮剂润湿分散剂的选择[J].山东农业大学学报:自然科学版,2009,40(2):251-253. 被引量:6

5张楠,刘家祥,吴妲.分散剂对ITO前驱物浆料稳定性的影响[J].稀有金属材料与工程,2009,38(6):1033-1037. 被引量:4

6罗淑湘,李俊领,许威.纳米TiN粉体在无水乙醇中的分散研究[J].材料导报,2010,24(4):37-40. 被引量:3

7吕明静,肖春霞,郭露村.复合分散剂稳定的氧化铝悬浮液抗电解质特性的研究[J].陶瓷学报,2010,31(1):91-95. 被引量:3

8陈中文,杨付,陈晶,周志鹏,高宪娥.YAG纳米粉体的制备及去团聚[J].中国激光,2012,39(B06):222-226. 被引量:1

9石嘉宇,谭艳,苏泽飞,潘亚美,林俊君,吕维忠,万军鹏.纳米ITO水性浆料分散性能的影响因素研究[J].广州化工,2013,41(1):53-55. 被引量:1

10崔晓芳,郗雨林.共沉淀法制备纳米ITO粉末影响因素[J].热加工工艺,2013,42(8):66-68. 被引量:1

1张艳玲,许学芝.关于治理厂内铁路运输物料流失的探讨[J].冶金设备管理与维修,2003,21(3):40-40.

2崔晓芳,郗雨林.纳米ITO粉末制备技术[J].热加工工艺,2012,41(24):98-100.

3刘喜波,陈派明,杨硕.铟锡氧化物陶瓷靶的制备[J].材料开发与应用,2011,26(3):26-29. 被引量:1

4崔晓芳,郗雨林.共沉淀法制备纳米ITO粉末影响因素[J].热加工工艺,2013,42(8):66-68. 被引量:1

5张雪凤,常鹏北,彭晖,刘冠鹏.直流电弧法回收ITO废靶技术研究[J].材料开发与应用,2012,27(2):44-46. 被引量:2

6张维佳,王天民,糜碧,洪轲.纳米ITO粉末及高密度ITO靶制备工艺的研究现状[J].稀有金属材料与工程,2004,33(5):449-453. 被引量:26

7毛黎明,李历历,段学臣.两种不同分散剂对ITO纳米粉末粒度和团聚的影响[J].稀有金属与硬质合金,2005,33(1):5-7. 被引量:5

8朱协彬,段学臣.超声电解法制备纳米铜粉的研究[J].上海有色金属,2004,25(3):97-99. 被引量:22

9段雨露,叶锐,闫星辰,戴诚,谭江,徐国富.pH值和煅烧温度对共沉淀法制备ITO纳米粉末的影响[J].粉末冶金材料科学与工程,2014,19(3):413-420.

10殷兆迁,孙朝晖,李大标,侯海军.钒铝合金用五氧化二钒制取技术研究[J].钢铁钒钛,2014,35(6):6-12. 被引量:4

Basic Information:

DOI:

Chinese Library Classification Number:TF123.72[冶金工程—粉末冶金]

Citation Information:

In this paper,study is made of the effects of pH value on co-precipitation of nano-size ITO powder,and characterization analysis is made by TEM and XRD. The results show that co-precipitation is done at pH value 2.8-4.1. When pH= 9 at precipitation end, the powder is characterized by smallest grain size, largest specific surface area, lowest agglomeration factor, uniform particle distribution, good single dispersion property without agglomeration. When pH value is too low, the incomplete precipitation occurs, resulting in material loss. However, when pH is too high, the grain size becomes larger,affecting specific surface area and other relevant properties.

quote

GB/T 7714-2015 [1] ZHU Xie-bin, DUAN Xue-chen. Effects of pH Value on Co-precipitation of Nano-size ITO Powder[J]. Rare Metals and Cemented Carbides, 2006(2): 8-11.
MLA [1] ZHU Xie-bin, and DUAN Xue-chen. "Effects of pH Value on Co-precipitation of Nano-size ITO Powder." Rare Metals and Cemented Carbides, no. 2, 2006, pp. 8-11.
APA [1] ZHU Xie-bin, & DUAN Xue-chen. (2006). Effects of pH Value on Co-precipitation of Nano-size ITO Powder. Rare Metals and Cemented Carbides(2), 8-11.
IEEE [1] ZHU Xie-bin and DUAN Xue-chen, "Effects of pH Value on Co-precipitation of Nano-size ITO Powder," Rare Metals and Cemented Carbides, no. 2, pp. 8-11, 2006. keywords: {ITO;powder;pH value;preparation}