Fundamental Research on Preparation of RE Foam Aluminum AITranslate
Abstract AITranslate
Research is made on addition of rare earth（La,Ce and Y） during foam aluminum preparation so as to improve the compressive strength of foam aluminum. The results show that the compressive strength is best when rare earth-Y is added in this experiment. And the following optimum process conditions are obtained through orthogonal experiment ：temperature 700 ℃, Y dosage 0.2 mass %, stirring time 2 min and heat preservation time 2 min.
KeyWords AITranslate
1Banhart J, et al. Deformation characteristics of metal foams[J]. Mater Sci, 1988,33 : 1431.
2Yang C C,et al. Foaming characteristies control during production o( aluminum alloy foam[J]. Journal of Alloys and Compounds, 2000,313 (6) :188.
3赵玉园.制备泡沫铝的一种新方法:烧结溶解法[J].世界科技研究与发展,2003,25(1):66-71. 被引量：17
4王录才,陈新,柴跃生,张琰.熔模铸造法通孔泡沫铝制备工艺研究[J].铸造,1999(1):8-10. 被引量：16
5张启运 等.稀土对铝硅共晶合金变质作用的研究[J].金属学报,1981,17(2):130-130.
6瘐晋 等.铝合金材料新发展—稀土铝合金[J].轻金属,2002,16(9):64-64.
7程和法,黄笑梅,许玲.泡沫铝的动态压缩性能和吸能性研究[J].兵器材料科学与工程,2003,26(5):37-39. 被引量：47
8宋振纶,马立群,吴照金,何德坪,舒光冀.铝熔体泡沫化过程体积变化与胞状组织的演变[J].材料科学与工艺,2000,8(1):21-24. 被引量：10
9左孝青,王茗,顾昆,孙加林,史庆南,刘荣佩.泡沫铝发泡过程动力学[J].昆明理工大学学报：理工版,2003,28(3):6-9. 被引量：10
10左孝青,张金娅,王茗,顾昆,孙加林,史庆南,刘荣佩.泡沫铝发泡过程热力学[J].昆明理工大学学报：理工版,2003,28(5):45-51. 被引量：11
1朱茂兰.稀土泡沫铝合金真空吸铸工艺的研究[J].材料研究与应用,2010,4(1):71-74. 被引量：2
1步向义.建筑用降噪泡沫铝合金的吸声性能研究[J].铸造技术,2015,36(8):1934-1935. 被引量：1
2刘玉宝,陈国华,于兵,张文灿,梁行方,陈宇昕.稀土熔盐电解过程出金属技术研究进展[J].稀土,2018,39(2):134-140. 被引量：8
1王芹,陈肖虎,唐道文.稀土泡沫铝制备过程热力学研究[J].贵州工业大学学报：自然科学版,2008,37(5):13-16.
2胡中芸,杨东辉,李军,陈建清,江静华,马爱斌.泡沫铝的制备方法及其发展现状[J].热加工工艺,2014,43(12):24-28. 被引量：11
3程申涛,周星,叶晓苏,毛协民,李重河.SiCp增强泡沫铝制备工艺研究[J].功能材料,2007,38(A10):3836-3839. 被引量：1
4周正,王健,丁培道.金属间化合物增强铝合金的组织形貌[J].铸造,1999(6):1-4.
5S.H. Song,Y.S. Byun,T.W. Ku,W.J. Song,J. Kim,B.S. Kang.Experimental and Numerical Investigation on Impact Performance of Carbon Reinforced Aluminum Laminates[J].材料科学技术：英文版,2010,0(4):327-332. 被引量：10
6李凡国,于思荣,初宏超,袁明,刘恩洋,汪洁霞.稀土Y对漂珠/AZ91D复合材料组织和力学性能的影响[J].特种铸造及有色合金,2016,36(12):1319-1322.
7刘兆政,刘耀辉,蒋百灵.对薄膜CrAlTi(Y)N硬度的研究[J].真空科学与技术学报,2008,28(3):194-198. 被引量：6
8周建国,胡福增,吴叙勤.碳纤维增强铝合金层压材料的研究[J].复合材料学报,1994,11(4):26-32. 被引量：9
9万云,章继峰,周利民,王振清.玻璃纤维铝合金板低速冲击损伤演化数值模拟[J].华中科技大学学报：自然科学版,2015,43(2):94-97. 被引量：6
10滕奎,李红萍.玻璃纤维增强铝合金层合板疲劳性能试验研究[J].航空制造技术,2016,59(18):84-87. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TB383[一般工业技术—材料科学与工程]
Citation Information:
Research is made on addition of rare earth（La,Ce and Y） during foam aluminum preparation so as to improve the compressive strength of foam aluminum. The results show that the compressive strength is best when rare earth-Y is added in this experiment. And the following optimum process conditions are obtained through orthogonal experiment ：temperature 700 ℃, Y dosage 0.2 mass %, stirring time 2 min and heat preservation time 2 min.
quote
| GB/T 7714-2015 | [1] CHEN Shu-wen, ZHANG Chong-min, DI Yu-chun. Fundamental Research on Preparation of RE Foam Aluminum[J]. Rare Metals and Cemented Carbides, 2006(2): 5-7. |
| MLA | [1] CHEN Shu-wen, et al., "Fundamental Research on Preparation of RE Foam Aluminum." Rare Metals and Cemented Carbides, no. 2, 2006, pp. 5-7. |
| APA | [1] CHEN Shu-wen, ZHANG Chong-min, & DI Yu-chun. (2006). Fundamental Research on Preparation of RE Foam Aluminum. Rare Metals and Cemented Carbides(2), 5-7. |
| IEEE | [1] CHEN Shu-wen, ZHANG Chong-min, and DI Yu-chun, "Fundamental Research on Preparation of RE Foam Aluminum," Rare Metals and Cemented Carbides, no. 2, pp. 5-7, 2006. keywords: {rare earth foam aluminum;melt foaming;compressive strength} |