Effect of Rolling Process on Microstructure and Property of Warm Rolled Molybdenum Sheet for Down-stream Operation AITranslate
Abstract AITranslate
The effect of rolling process on microstructure and property of molybdenum sheet was investiga- ted by changing rolling capacity, rolling temperature and rolling process. The results show that the longitudinal and transverse microstructures and properties of molybdenum sheet are similar by high-rate blooming and low temperature alternative rolling process. Meanwhile, the sheet can be adapted to the downstream operation.
KeyWords AITranslate
1钟培全.钼与钼合金的应用及其加工方法[J].中国钼业,2000,24(5):15-16. 被引量：28
2稀有金属材料加工手册编辑组．稀有金属材料加工手册[M]．北京：冶金工业出版社，1984：400-470．
1杨松涛,李继文,魏世忠,徐流杰,彭光辉.纯钼及钼合金板材轧制加工工艺探讨[J].材料研究与应用,2010,4(1):60-64. 被引量：11
2杨松涛,李继文,魏世忠,徐流杰,彭光辉.纯钼及钼合金板材轧制加工工艺概述[J].中国钼业,2010,34(2):42-45. 被引量：7
3郭让民,淡新国,侯军涛.钼镧合金板材高温抗载荷弯曲性能研究[J].中国钼业,2013,37(3):47-49. 被引量：7
4李继文,杨松涛,魏世忠,张国赏,徐流杰,U.轧制方式和变形量对纯钼板坯微观组织和织构的影响[J].稀有金属,2014,38(3):348-353. 被引量：12
5王小康,陈艳芳,尤强周,陶诗伟,王壮,曾钦利,刘冰,罗银博.钼粉形貌对纯钼板坯组织和性能的影响[J].南方金属,2018(1):17-20. 被引量：4
6张二召,张灵杰,岳慎伟,彭光辉,李改改,杨雷雷,袁蔚.蓝宝石长晶炉用钼板终轧和预备热处理工艺研究[J].有色金属加工,2019,48(4):24-28. 被引量：2
1刘雨婷,郑洲顺,张帆,叶志坚,段柏华,杨栋林.基于DEFORM-3D的钼板多道次轧制仿真研究[J].中国体视学与图像分析,2020(2):157-165.
2傅蔡安,郝健,彭广盼,季坤.基于Deform的钼板轧制用轧辊辊形的研究[J].锻压技术,2011,36(3):50-54. 被引量：8
3郝健,傅蔡安.波纹廓形轧辊轧制钼基片坯的研究[J].机械设计与制造,2011(12):138-140.
4沈宏,邓宇锋,郝健.钼板材热轧工艺及质量控制的研究[J].稀有金属与硬质合金,2012,40(5):41-44.
5徐忠兰,郝健.钼板材轧制过程的数值模拟及其工艺参数的优化[J].稀有金属与硬质合金,2013,41(3):41-45. 被引量：1
6郭让民,淡新国,侯军涛.钼镧合金板材高温抗载荷弯曲性能研究[J].中国钼业,2013,37(3):47-49. 被引量：7
7黄江波,魏修宇,李光宗,张外平,夏艳成,常理,宋立强.热轧变形量及退火工艺对钼板材组织和性能的影响[J].硬质合金,2013,30(5):270-274. 被引量：8
8谭江飞,王快社,胡平,杨帆,于志涛,王华,何欢承,康轩齐.TZM合金高温性能研究现状[J].材料导报,2014,28(23):68-71. 被引量：5
9傅崇伟,魏修宇.粉末特性和加工工艺参数对钼板组织和性能影响的研究[J].硬质合金,2014,31(6):347-352. 被引量：3
10许晓静,陆文俊,蒋凌,卢予东,王子路,郭云飞.轧制驱动ECA大应变加工及后续热处理对5052铝合金力学性能与晶体取向的影响[J].稀有金属,2015,39(8):759-763. 被引量：5
1张蓉,钱书琨.轧制温度对交叉轧制AZ31镁合金板材显微组织和力学性能的影响[J].机械工程材料,2013,37(10):13-16.
2一种制备高性能引伸钼带的方法[J].中国钼业,2008,32(5):39-39.
3邓自南,赵娟,杨明杰.轧制工艺对深冲钼带组织和性能的影响[J].稀有金属快报,2008,27(4):18-21. 被引量：4
4刘劲松,竺晓华,张士宏,郑黎,宋广胜,王忠堂.AZ31镁合金轧制板材退火后的组织与力学性能[J].材料热处理学报,2010,31(2):104-107. 被引量：12
5张青来,李敏,韩寅奔,韩伟东,冯甜甜.交叉轧制钼带冷深冲性能及微观组织研究[J].稀有金属材料与工程,2012,41(12):2109-2112. 被引量：8
6刘劲松,竺晓华,郑黎,王忠堂,宋广胜,张士宏.AZ31镁合金交叉轧制塑性应变有限元模拟分析[J].轻合金加工技术,2009,37(2):18-20. 被引量：4
7史乃安,邹波,阎东宇,吴胜田.ASP小交叉轧制工艺研究[J].轧钢,2008,25(1):21-24. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TG146.416[金属学及工艺—金属材料]
Citation Information:
The effect of rolling process on microstructure and property of molybdenum sheet was investiga- ted by changing rolling capacity, rolling temperature and rolling process. The results show that the longitudinal and transverse microstructures and properties of molybdenum sheet are similar by high-rate blooming and low temperature alternative rolling process. Meanwhile, the sheet can be adapted to the downstream operation.
quote
| GB/T 7714-2015 | [1] DENG Zi-nan, GUO Lei, ZHAO Juan, et al. Effect of Rolling Process on Microstructure and Property of Warm Rolled Molybdenum Sheet for Down-stream Operation[J]. Rare Metals and Cemented Carbides, 2008(3): 24-26. |
| MLA | [1] DENG Zi-nan, et al., "Effect of Rolling Process on Microstructure and Property of Warm Rolled Molybdenum Sheet for Down-stream Operation." Rare Metals and Cemented Carbides, no. 3, 2008, pp. 24-26. |
| APA | [1] DENG Zi-nan, GUO Lei, ZHAO Juan, JIN Bo, HUANG Xian-ming, & YANG Ming-jie. (2008). Effect of Rolling Process on Microstructure and Property of Warm Rolled Molybdenum Sheet for Down-stream Operation. Rare Metals and Cemented Carbides(3), 24-26. |
| IEEE | [1] DENG Zi-nan, GUO Lei, ZHAO Juan, JIN Bo, HUANG Xian-ming, and YANG Ming-jie, "Effect of Rolling Process on Microstructure and Property of Warm Rolled Molybdenum Sheet for Down-stream Operation," Rare Metals and Cemented Carbides, no. 3, pp. 24-26, 2008. keywords: {molybdenum sheet;down stream operation;rolling process;microstructure and property;low temperature cross rolling} |