Preparation and Performance Study of Cu-7Mn-0.5Ag-0.2Ce-0.2Zr Resistance Alloy AITranslate
Abstract AITranslate
Copper-manganese resistance alloy strips were prepared by melting,machining,and heat treatment.The effects of solid solution temperature,cold rolling reduction,annealing temperature and annealing holding time on resistivity and temperature coefficient of resistance of the alloy were studied.The experimental results show that the best experimental scheme is the solid solution temperature of 900℃,cold rolling reduction of 90%,annealing temperature of 350℃,and annealing holding time of 1 h.The resistivity and temperature coefficient of resistance of the obtained alloy are relatively low,which are 24.1μΩ·cm and 60×10-6/℃,respectively.
KeyWords AITranslate
1何慜.Shunt分流电阻在新能源电动车的应用[J].集成电路应用,2019,36(9):46-48. 被引量：1
2黄树东,王勇,杨贤军,徐永红.NiCrAlFe精密电阻合金中的L12有序结构研究[J].稀有金属材料与工程,2020,49(12):4159-4165. 被引量：1
3王勇,杨贤军,喻文新,黄树东,徐永红,吴达,乔丽英.化学成分及时效处理对镍铬铝铁精密电阻合金性能的影响[J].材料导报,2019,33(24):4131-4135. 被引量：8
4王晓平,赵特秀,季航,梁齐,董翊.晶粒尺寸对薄膜电阻率温度系数的影响[J].物理学报,1994,43(2):297-302. 被引量：15
1邓利鹏,黎超丰,章新立,刘峰,张青科,许赪,宋振纶.冷轧变形对CuNiCoSi合金组织和性能的影响[J].铜业工程,2023(3):46-54.
2赵玲,胡立威,王斗,刘学.激光熔化沉积Cu-Fe合金的液相分离组织及力学性能研究[J].铜业工程,2023(2):44-49.
3赵久辉,郭祊鹤,肖桥平.Ag对C19210合金带材的微观组织和性能的影响[J].铜业工程,2023(3):64-69.
4王帅,郭二军,冯义成,付金来,马宝霞,赵思聪,王雷.冷轧变形对Al-Cu-Mg合金的显微组织与力学性能的影响[J].材料导报,2023,37(11):146-152.
5陈代雄,沈楼燕,肖骏,余浔,胡波,李晓东.组合捕收剂协同浮选-高梯度磁选处理中非某氧化铜钴矿试验研究[J].湖南有色金属,2023,39(3):15-19.
6王长胜,付华栋,张洪涛,谢建新.冷轧变形对高性能Cu-Ni-Si合金组织性能与析出行为的影响[J].金属学报,2023,59(5):585-598. 被引量：2
7贺豪斌,兰修凯,姬扬.用BiSePt合金提高自旋轨道转矩效率[J].物理学报,2023,72(13):178-184.
Basic Information:
DOI：
Chinese Library Classification Number:TG132.2[一般工业技术—材料科学与工程]
Citation Information:
Copper-manganese resistance alloy strips were prepared by melting,machining,and heat treatment.The effects of solid solution temperature,cold rolling reduction,annealing temperature and annealing holding time on resistivity and temperature coefficient of resistance of the alloy were studied.The experimental results show that the best experimental scheme is the solid solution temperature of 900℃,cold rolling reduction of 90%,annealing temperature of 350℃,and annealing holding time of 1 h.The resistivity and temperature coefficient of resistance of the obtained alloy are relatively low,which are 24.1μΩ·cm and 60×10-6/℃,respectively.
quote
| GB/T 7714-2015 | [1] XU Liang-liang, TAN Dun-qiang. Preparation and Performance Study of Cu-7Mn-0.5Ag-0.2Ce-0.2Zr Resistance Alloy[J]. Rare Metals and Cemented Carbides, 2023(3): 43-46. |
| MLA | [1] XU Liang-liang, and TAN Dun-qiang. "Preparation and Performance Study of Cu-7Mn-0.5Ag-0.2Ce-0.2Zr Resistance Alloy." Rare Metals and Cemented Carbides, no. 3, 2023, pp. 43-46. |
| APA | [1] XU Liang-liang, & TAN Dun-qiang. (2023). Preparation and Performance Study of Cu-7Mn-0.5Ag-0.2Ce-0.2Zr Resistance Alloy. Rare Metals and Cemented Carbides(3), 43-46. |
| IEEE | [1] XU Liang-liang and TAN Dun-qiang, "Preparation and Performance Study of Cu-7Mn-0.5Ag-0.2Ce-0.2Zr Resistance Alloy," Rare Metals and Cemented Carbides, no. 3, pp. 43-46, 2023. keywords: {Cu-Mn resistance alloy;resistivity;temperature coefficient of resistance;orthogonal test;machining;heat treatment} |