daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Comparison of sol-gel and co-precipitation methods on the structural properties and phase transformation of γ and α-Al2O3 nanoparticles AITranslate

Damghan University; Damghan University
AITranslate
Publisher: Springer Nature
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The nanostructured γ and α alumina powders were synthesized by sol-gel and co-precipitation methods, and properties of the powders were studied by XRD, SEM, TEM, BET and FTIR. The results showed that both γ and α phases were formed in the lower temperature in precipitation method compared to sol-gel. The size of spherical α-alumina synthesized by sol-gel was 10–15 nm, whereas the sample prepared by co-precipitation yielded nearly spherical and hexagon α-powder with particle size of 10–50 nm. At 750 °C the resulting powder prepared by co-precipitation exhibited larger surface area (206.2 m2/g) compared to sol-gel (30.72 m2/g), hence it is recommended for catalytic and sensing applications.

KeyWords AITranslate

γ and αAl2O3 Coprecipitation solgel Nanoparticles
No data

Basic Information:

DOI:https://doi.org/10.1007/s40436-013-0018-1

Chinese Library Classification Number:

Citation Information:

The nanostructured γ and α alumina powders were synthesized by sol-gel and co-precipitation methods, and properties of the powders were studied by XRD, SEM, TEM, BET and FTIR. The results showed that both γ and α phases were formed in the lower temperature in precipitation method compared to sol-gel. The size of spherical α-alumina synthesized by sol-gel was 10–15 nm, whereas the sample prepared by co-precipitation yielded nearly spherical and hexagon α-powder with particle size of 10–50 nm. At 750 °C the resulting powder prepared by co-precipitation exhibited larger surface area (206.2 m2/g) compared to sol-gel (30.72 m2/g), hence it is recommended for catalytic and sensing applications.

quote

GB/T 7714-2015 [1] A. Rajaeiyan, M. M. BagheriMohagheghi. Advances in Manufacturing, 2013(1). DOI:10.1007/s40436-013-0018-1.
MLA [1] A. Rajaeiyan, and M. M. BagheriMohagheghi. Advances in Manufacturing, no. 1, 2013, https://doi.org/10.1007/s40436-013-0018-1.
APA [1] A. Rajaeiyan, & M. M. BagheriMohagheghi. (2013). Advances in Manufacturing(1). https://doi.org/10.1007/s40436-013-0018-1
IEEE [1] A. Rajaeiyan and M. M. BagheriMohagheghi, Advances in Manufacturing, no. 1, 2013, doi: 10.1007/s40436-013-0018-1. keywords: {γ and αAl2O3;Coprecipitation;solgel;Nanoparticles}