daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effects of Rare Earth Y on Fatigue and Wear Resistance of GCr15 Bearing Steel AITranslate

School of Materials and Metallurgy,Inner Mongolia University of Science and Technology;School of Materials and Metallurgy,Inner Mongolia University of Science and Technology;School of Materials and Metallurgy,Inner Mongolia University of Science and Technology;School of Materials and Metallurgy,Inner Mongolia University of Science and Technology;School of Materials and Metallurgy,Inner Mongolia University of Science and Technology
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites Download PDF

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

GCrl5 bearing steel with different Y contents was prepared by vacuum induction furnace,and the effects of rare earth Y on the fatigue and wear resistance of the GCrl5 bearing steel were investigated by bending fatigue test and sliding wear test.The results show that the fatigue life of the test steel significantly increases with the addition of the rare earth Y.The fatigue fracture morphology of the test steel without Y addition is mainly fluvial and slightly dimpled,and the fracture mode is brittle fracture.The fatigue fracture of the test steel added with a small amount of Y exhibits fatigue striations,and its width decreases with the increase of rare earth Y.In addition,the fatigue fracture inclusions of the test steel without Y addition are MnS-Al2O3 composite inclusions with irregular angles,which are modified into spherical Al-O-Y-Mn-S rare earth inclusions with the addition of a small amount of Y,thereby improving the fatigue performance of the test steel.With the increase of rare earth Y,the wear loss of the test steel gradually decreases,its friction coefficient gradually decreases as well,and the wear resistance is enhanced.The wear mechanism of the test steel is a joint action of abrasive wear and fatigue wear,and with the increase of rare earth Y,the abrasive wear and fatigue wear gradually reduce.

KeyWords AITranslate

rare earth Y GCrl5 bearing steel fatigue wear resistance

1王宇,曾伟,韩靖,戴光泽,赵君文,徐忠宣.氮碳共渗对ER8车轮钢高温摩擦磨损性能的影响[J].材料导报,2020,34(18):18119-18124. 被引量:5

2曾宋文,刘璐,刘雨健,钱东升,王丰.冷轧对G20CrNi2MoA渗碳轴承钢组织演变与耐磨性的影响[J].金属热处理,2020,45(12):53-59. 被引量:1

3羌俊杰,汪振华.WC-(Co-Mo-Ni)硬质合金摩擦磨损特性研究[J].稀有金属与硬质合金,2021,49(6):85-93. 被引量:2

4吕滨江,王森,郭峰,彭建.微量添加稀土元素Nd和Er对挤压态Mg-6.0Zn-0.5Mn镁合金干摩擦磨损性能的影响[J].稀有金属材料与工程,2021,50(12):4516-4524. 被引量:2

5冯业飞,周晓明,邹金文,刘春江,王超渊,田高峰.夹杂物对FGH96合金低周疲劳寿命的影响[J].稀有金属材料与工程,2021,50(7):2455-2463. 被引量:5

6陈艳娜,熊毅,范梅香,岳赟,姚怀,任凤章.TC11钛合金在不同温度下的疲劳断裂分析[J].材料热处理学报,2019,0(8):61-68. 被引量:7

7陈少华,米绪军,别立夫,黄国杰.稀土Ce对HMn64-8-5-1.5合金组织及耐磨性能的影响[J].稀有金属材料与工程,2020,49(3):811-818. 被引量:4

8郑盼,商剑,张越.稀土添加量对20CrMnTi钢表面碳铌复合渗层组织及性能的影响[J].表面技术,2018,47(7):167-172. 被引量:4

9王姗姗,郭浩,雷建中,张永振.我国滚动轴承磨损失效分析现状及展望[J].轴承,2017(10):58-63. 被引量:22

10刘跃,韩顺,厉勇,王春旭,高远航,王瑞,李建新.稀土元素La对300M钢疲劳性能的影响[J].金属热处理,2021,46(2):14-19. 被引量:2

1武利平,刘妍,智建国,张江山,刘青.稀土Ce对C-Mn低温钢强韧性的影响机制[J].稀有金属材料与工程,2022,51(12):4561-4569.

2张高超,赵志杰,邢静.纳米材料增强丁腈橡胶耐磨性能研究进展[J].中国科技期刊数据库 工业A,2021(9):0157-0157.

3韩杰,王毅,刘成宝,许荣昌,孙宗辉,栾义坤.稀土对GCr15轴承钢夹杂物的变质行为分析[J].连铸,2023(2):70-77.

4谢港生,邢淑清,申丽娟,麻永林,刘永珍,陈重毅.脉冲磁场对GCr15钢球化退火过程中碳化物析出的影响[J].金属热处理,2023,48(4):118-123. 被引量:1

5张建晓,李晶,史成斌,耿如明,智建国.精炼渣钙铝比对铈处理钢中夹杂物的影响[J].江西冶金,2023,43(1):24-31.

6邓海龙,刘兵,郭扬,康贺铭,李明凯,李永平.基于内部失效机理预测评估渗碳Cr-Ni齿轮钢的超高周疲劳强度[J].材料研究学报,2023,37(1):55-64.

7康乐,高莹,谭宇洋,李德宇,韩瑞雪,李奕葶.小麦纳豆发酵工艺初步研究[J].园艺与种苗,2023,43(4):60-63.

8李彩霞,幸世文,李超,赵栖彤.锡添加量对铸态Mg-3Al-0.5SiO_(2)合金显微组织和力学性能的影响[J].机械工程材料,2023,47(3):72-77.

9赖振民,黄泽雄,揭晓华,麦永津.异质结构铜铬锆合金的摩擦磨损性能[J].金属热处理,2023,48(4):40-44.

10高云鹏,王颖,王东坡,杨振文.TC11钛合金扩散连接接头组织及力学性能研究[J].稀有金属材料与工程,2023,52(2):770-776. 被引量:1

Basic Information:

DOI:

Chinese Library Classification Number:TG142[金属学及工艺—金属材料]

Citation Information:

GCrl5 bearing steel with different Y contents was prepared by vacuum induction furnace,and the effects of rare earth Y on the fatigue and wear resistance of the GCrl5 bearing steel were investigated by bending fatigue test and sliding wear test.The results show that the fatigue life of the test steel significantly increases with the addition of the rare earth Y.The fatigue fracture morphology of the test steel without Y addition is mainly fluvial and slightly dimpled,and the fracture mode is brittle fracture.The fatigue fracture of the test steel added with a small amount of Y exhibits fatigue striations,and its width decreases with the increase of rare earth Y.In addition,the fatigue fracture inclusions of the test steel without Y addition are MnS-Al2O3 composite inclusions with irregular angles,which are modified into spherical Al-O-Y-Mn-S rare earth inclusions with the addition of a small amount of Y,thereby improving the fatigue performance of the test steel.With the increase of rare earth Y,the wear loss of the test steel gradually decreases,its friction coefficient gradually decreases as well,and the wear resistance is enhanced.The wear mechanism of the test steel is a joint action of abrasive wear and fatigue wear,and with the increase of rare earth Y,the abrasive wear and fatigue wear gradually reduce.

quote

GB/T 7714-2015 [1] WANG Ting, CHE Zhi-qiang, YANG Ji-chun, et al. Effects of Rare Earth Y on Fatigue and Wear Resistance of GCr15 Bearing Steel[J]. Rare Metals and Cemented Carbides, 2023(2): 54-59.
MLA [1] WANG Ting, et al., "Effects of Rare Earth Y on Fatigue and Wear Resistance of GCr15 Bearing Steel." Rare Metals and Cemented Carbides, no. 2, 2023, pp. 54-59.
APA [1] WANG Ting, CHE Zhi-qiang, YANG Ji-chun, LIU Xiang-jun, & YANG Chang-qiao. (2023). Effects of Rare Earth Y on Fatigue and Wear Resistance of GCr15 Bearing Steel. Rare Metals and Cemented Carbides(2), 54-59.
IEEE [1] WANG Ting, CHE Zhi-qiang, YANG Ji-chun, LIU Xiang-jun, and YANG Chang-qiao, "Effects of Rare Earth Y on Fatigue and Wear Resistance of GCr15 Bearing Steel," Rare Metals and Cemented Carbides, no. 2, pp. 54-59, 2023. keywords: {rare earth Y;GCrl5 bearing steel;fatigue;wear resistance}