Study on Dynamic Recrystallization of Commercially Pure Titanium During Plane Strain Compression AITranslate
Abstract AITranslate
Multi-pass plane strain compression tests of commercially pure titanium were carried out on Gleeble—3800thermal simulation test machine to simulate practical hot rolling process,and the deformation temperature is 650～800 ℃ and the strain rate is 1s^（-1） or 5s^（-1） .Based on the data of true stress and strain,softening rate and work-hardening rate,softening behavior and dynamic recrystallization critical strain of commercially pure titanium were investigated during multi-pass deformation.The results show that softening rate of commercially pure titanium increases with deformation temperature rising and strain rate decreasing in the interval,and its recrystallization critical strain decreases with deformation temperature increasing.There is linear relationship between dynamic recrystallization critical strainεcand peak strain ε_p of ε_c=0.467 6ε_p.
KeyWords AITranslate
1CHEN X M,LIN Y C,WEN D X,et al. Dynamic recrys- tallization behavior of a typical nickel-based superalloy during hot deformation[J]. Materials & Design,2014,57 (5) :568-577.
2梁后权,郭鸿镇,南洋,姚泽坤,涂唯坚.高温变形过程中的动态再结晶类型识别[J].中国科学：技术科学,2014,44(12):1309-1318. 被引量：5
3王忠堂,邓永刚,张士宏.基于加工硬化率的高温合金Inconel 690动态再结晶临界条件[J].材料热处理学报,2014,35(7):193-197. 被引量：13
4苏娟华,韩亚玮,任凤章,魏世忠,陈志强,陈学文.应用加工硬化率研究工业纯钛动态再结晶行为[J].功能材料,2014,45(7):7074-7078. 被引量：6
5康煜华,刘义伦,何玉辉.热轧与平面应变压缩试验的有限元对比分析[J].应用力学学报,2010,27(2):428-432. 被引量：2
6PRASAD G V S S, GIERDELER M, GOTTSTEIN G. Work hardening model based on multipledislocation den- sities[J]. Materials Science and Engineering A, 2005, 400/401(1) :231-233.
7POLIAK E I,JONAS J J. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization[J]. Acta Materialia, 1996, 44 (1) : 127-136.
8POLIAK E I,JONAS J J. Critical strain for dynamic re- crystallization in variable strain rate hot deformation[J]. Transactions of the Iron & Steel Institute of Japan, 2003,43(5):692-700.
9李俊鹏,沈健,闫晓东,毛柏平,闫亮明.多道次热压缩过程中7050铝合金的再结晶行为[J].中国有色金属学报,2009,19(10):1754-1758. 被引量：25
10王佳夫,花福安,刘振宇,王国栋.S32750超级双相不锈钢的热变形及组织分析[J].东北大学学报：自然科学版,2011,32(7):948-951. 被引量：4
1王培祯,郑必举,王隽生,史亚鸣,张玉勤,蒋业华.电子束冷床熔铸大规格TA1纯钛扁锭的多道次降温热变形行为研究[J].昆明理工大学学报：自然科学版,2023,48(1):19-25.
1王劲,肖福仁,侯献军,单以银,李玉海.平面应变压缩条件下管线钢的再结晶研究[J].沈阳工业学院学报,2003,22(3):65-68. 被引量：1
2裴颖,GODFREY Andrew,刘伟,蒋佳,刘庆.平面应变压缩过程中初始取向对AZ31镁合金变形行为的影响(英文)[J].电子显微学报,2009,28(1):6-10. 被引量：5
3汪炳叔,邓丽萍,CHAPUIS Adrien,郭宁,李强.AZ31镁合金在平面应变压缩过程中的孪生行为研究[J].金属学报,2015,51(12):1441-1448. 被引量：3
4张治民,王强,李保成.AZ31镁合金温变形对其性能影响的研究[J].材料科学与工艺,2005,13(6):637-639. 被引量：10
5潘红波,胡水平,唐荻,王潇潇.对称性对平面应变压缩过程中金属流动及组织的影响[J].热加工工艺,2008,37(3):57-59.
6潘红波,唐荻,胡水平,王潇潇.平面应变压缩金属流变规律及影响因素分析[J].钢铁,2008,43(11):59-64. 被引量：8
7潘红波,唐荻,胡水平,王潇潇.平面应变过程中摩擦对金属流变规律的影响[J].北京科技大学学报,2008,30(11):1266-1269. 被引量：1
8宋志刚,郑文杰,杨卓越,刘骁,丰涵.00Cr22Ni5Mo3N热变形动态软化机理研究[J].钢铁,2009,44(10):61-65.
9张少军,代宗岭,周纪华.铝合金冷态流动应力数学模型[J].北京科技大学学报,1997,19(A02):65-68. 被引量：2
10李龙飞,杨王玥,孙祖庆,王青峰.低碳钢铁素体相区变形特性[J].北京科技大学学报,2001,23(3):225-229. 被引量：11
Basic Information:
DOI：
Chinese Library Classification Number:TG146.23[金属学及工艺—金属材料]
Citation Information:
Multi-pass plane strain compression tests of commercially pure titanium were carried out on Gleeble—3800thermal simulation test machine to simulate practical hot rolling process,and the deformation temperature is 650～800 ℃ and the strain rate is 1s^（-1） or 5s^（-1） .Based on the data of true stress and strain,softening rate and work-hardening rate,softening behavior and dynamic recrystallization critical strain of commercially pure titanium were investigated during multi-pass deformation.The results show that softening rate of commercially pure titanium increases with deformation temperature rising and strain rate decreasing in the interval,and its recrystallization critical strain decreases with deformation temperature increasing.There is linear relationship between dynamic recrystallization critical strainεcand peak strain ε_p of ε_c=0.467 6ε_p.
quote
| GB/T 7714-2015 | [1] WANG Yi-chao, XING Qiu-li, XIE Ying-jie, et al. Study on Dynamic Recrystallization of Commercially Pure Titanium During Plane Strain Compression[J]. Rare Metals and Cemented Carbides, 2016(5): 64-69. |
| MLA | [1] WANG Yi-chao, et al., "Study on Dynamic Recrystallization of Commercially Pure Titanium During Plane Strain Compression." Rare Metals and Cemented Carbides, no. 5, 2016, pp. 64-69. |
| APA | [1] WANG Yi-chao, XING Qiu-li, XIE Ying-jie, & XI Jin-hui. (2016). Study on Dynamic Recrystallization of Commercially Pure Titanium During Plane Strain Compression. Rare Metals and Cemented Carbides(5), 64-69. |
| IEEE | [1] WANG Yi-chao, XING Qiu-li, XIE Ying-jie, and XI Jin-hui, "Study on Dynamic Recrystallization of Commercially Pure Titanium During Plane Strain Compression," Rare Metals and Cemented Carbides, no. 5, pp. 64-69, 2016. keywords: {commercially pure titanium;dynamic recrystallization;plane strain compression;thermal simulation;critical strain;softening rate;work-hardening rate} |