Improvement in the Oxygen Measurement Precision by Pulsed Coulometry from Tantalum Wires AITranslate
Abstract AITranslate
Tantalum wires were heated and melted with different methods, and their oxygen contents were measured by pulsed oxygen coulometric determinator. The results show that nickel bath has good fluxing effect on tantalum wires and can effectively reduce the blank value during oxygen measurement,resultingin a lower detection limit of 0.006 %. The RSD of measured values is less than 4.0 %. With nickel bath as the fluxing agent,coulometric determination is credible and accurate enough foroxygen analysisin Ta wire production.
KeyWords AITranslate
1吴铭,吴文军.钽粉氧含量对其钽阳极漏电流的影响[J].电子元件与材料,1995,14(4):51-56. 被引量：3
2赵强.脉冲加热—气相色谱法测定金属钨粉中氧含量[J].四川有色金属,1998(2):25-27. 被引量：2
3宋忠训.脉冲色谱法测定金属铬中的氧量[J].分析试验室,1994,13(5):42-43. 被引量：5
4刁伟涛.粉状钛中氧的测定.冶金分析,1986,(2):60-64.
5李婷,刘颂禹.金属中气体分析进展[J].冶金分析,1999,19(6):35-40. 被引量：11
1王宽,梁清华,周恺,王辉,郑伟.惰气熔融-红外吸收法测定钛钼合金中氧[J].冶金分析,2015,35(3):61-63. 被引量：13
2刘英,张勋高.电子探针法测定超细铜粉中氧含量[J].冶金分析,2021,41(10):23-28.
3刘攀,杜丽丽,唐伟,李治亚.无机固态材料中气体元素分析的现状与进展[J].理化检验：化学分册,2015,51(1):131-136. 被引量：9
1刘攀,聂富强.手动加样-惰气熔融-热导法测定氮化铬铁含氮量[J].化学工程师,2015,29(6):36-38. 被引量：1
2刘攀,聂富强,董俊轩.Top-down技术评估钢中氧的测量不确定度[J].福建分析测试,2015,24(6):38-44. 被引量：7
3刘文玖.钢铁材料中氧氮氢的测定分析[J].世界有色金属,2015,40(12):53-54. 被引量：2
4王宽,周恺,李波,孙宝莲,郑伟,梁清华.惰气熔融-红外/热导法同时测定锆合金中氧和氮[J].冶金分析,2017,37(1):81-84. 被引量：6
5闵小华,向力,李明佳,姚凯,江村聪,程从前,土谷浩一.{332}<113>孪晶与等温ω相的组合对不同O含量Ti-15Mo合金力学性能的影响[J].金属学报,2018,54(9):1262-1272. 被引量：4
6韩丽辉,林林,李牧明,李根.高锰钢中氧含量测定方法研究[J].实验技术与管理,2018,35(11):42-47. 被引量：3
7韩丽辉,张盈.高氢金属钛中氧含量测定方法[J].实验室研究与探索,2019,38(7):46-51. 被引量：2
8黄新树,邓传东,盛红伍,孙四中,秦毅.红外吸收法与热导法同时测定铀硅化合物中氧、氮含量[J].核动力工程,2020,41(1):172-175.
9王宽,杨军红,柴琴琴,石新层,张哲,郑伟.惰气熔融-热导法测定铝钒合金中氮[J].冶金分析,2020,40(5):79-82. 被引量：4
10刘攀,张欣耀,张毅.惰气熔融-红外吸收法测定铬铝、钼铝中间合金粉中氧[J].冶金分析,2020,40(6):13-20. 被引量：8
1何英,部丽娟.脉冲库仑法炉前控制分析钨钼钽铌中微量氧的研究[J].稀有金属与硬质合金,2014,42(6):53-57.
2凌笑梅,张寒琦,邴贵德,金钦汉,田家乐.铅的MIP-AAS测定[J].吉林大学自然科学学报,1990(2):99-101. 被引量：3
3付瑶,白锁柱.电热蒸发进样微波等离子体炬原子发射光谱法中共存元素的影响[J].光谱实验室,1998,15(5):61-64.
4胡斌,江祖成,曾云鄂.电热蒸发进样——等离子体原子发射光谱中钒和钛的蒸发机理研究[J].高等学校化学学报,1993,14(12):1665-1667. 被引量：2
5张兵,余长春,沈师孔.原位程序升温脱附(TPD)方法的建立及其应用实例[J].分析测试技术与仪器,1997,3(4):199-203. 被引量：1
6端允,常海洲,李改茹,晋卫军.钯卟啉室温燐光氧传感器的研究[J].分析化学,2003,31(9):1069-1072. 被引量：3
7曹阳,丁龙福,祁欣,任伟,钱文虎.活性氧化锰的制备及表征[J].无机化学学报,1998,14(4):473-477. 被引量：4
8秦卫东,漆廷邦.熔融金属中氢的直接测定[J].钢铁研究学报,1996,8(S1):1-4.
9赵敏,刘颖.高纯气体的分析——高纯气体中痕量氧的分析[J].低温与特气,1998(4):64-66. 被引量：1
10彭夷安,李其华,林建华,郭凤瑜.以Eu^（3＋）为荧光探针研究（LaO）_3BO_3的结构[J].中国稀土学报,1995,13(3):218-222. 被引量：5
Basic Information:
DOI：
Chinese Library Classification Number:O659.21[理学—分析化学]
Citation Information:
Tantalum wires were heated and melted with different methods, and their oxygen contents were measured by pulsed oxygen coulometric determinator. The results show that nickel bath has good fluxing effect on tantalum wires and can effectively reduce the blank value during oxygen measurement,resultingin a lower detection limit of 0.006 %. The RSD of measured values is less than 4.0 %. With nickel bath as the fluxing agent,coulometric determination is credible and accurate enough foroxygen analysisin Ta wire production.
quote
| GB/T 7714-2015 | [1] HE Ying. Improvement in the Oxygen Measurement Precision by Pulsed Coulometry from Tantalum Wires[J]. Rare Metals and Cemented Carbides, 2009(4): 41-43. |
| MLA | [1] HE Ying. "Improvement in the Oxygen Measurement Precision by Pulsed Coulometry from Tantalum Wires." Rare Metals and Cemented Carbides, no. 4, 2009, pp. 41-43. |
| APA | [1] HE Ying. (2009). Improvement in the Oxygen Measurement Precision by Pulsed Coulometry from Tantalum Wires. Rare Metals and Cemented Carbides(4), 41-43. |
| IEEE | [1] HE Ying, "Improvement in the Oxygen Measurement Precision by Pulsed Coulometry from Tantalum Wires," Rare Metals and Cemented Carbides, no. 4, pp. 41-43, 2009. keywords: {tantalum wire;oxygen;pulsed oxygen coulometric determinator;nickel bath;nickel fluxing agent;precision} |