daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Determination of Trace Hydrogen in High-purity Titanium Metal AITranslate

China Institute of Engineering Physics;China Institute of Engineering Physics;China Institute of Engineering Physics;China Institute of Engineering Physics
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The mass fraction of the hydrogen in high-purity titanium metal was determined by high frequency induction-thermal conductivity method. The influences of induction current, crucible material, fluxing agent,blank value,minimum analysis time and sample weight on the determined result were emphatically discussed. And a method to determine the hydrogen in high-purity titanium metal was established. The results show that the relative standard deviation of the hydrogen mass fraction determined by the above method is 6. 3%, and the recovery of standard addition is 98%-106%. The determination conditions of partial hydrogen content in titanium metal were studied by a combined analysis program. Based on peak separation experiments, each partial hydrogen content was calculated.

KeyWords AITranslate

high-purity titanium metal trace hydrogen partial hydrogen content high frequencyinductionthermal conductivity method

1张之翔.金属材料中微量氢和氧的分析[J].稀有金属材料与工程,1997,26(1):56-61. 被引量:5

2Joseph J Kreuser, Thomas W Junker, Richard A Fork. Simultaneous measurement of hydrogen, notrogen and oxygen in molten steel[J]. AISTech Proceedings, 2004, 24 ( 1 ): 821-829.

3李婷,刘颂禹.金属中气体分析进展[J].冶金分析,1999,19(6):35-40. 被引量:11

4王蓬,王海舟.金属中氢的分析技术进展[J].冶金分析,2007,27(3):37-44. 被引量:19

1魏欣,董俊华,柯伟.高放射性核废料地质处置环境中钛处置罐腐蚀研究的进展[J].腐蚀科学与防护技术,2013,25(2):160-164. 被引量:5

2王虹.惰性气体中熔样-热导法测定锆中氢的含量[J].理化检验:化学分册,2014,50(6):781-783. 被引量:3

1薛芳,魏欣,董俊华,柯伟.高放废物深地质处置环境中低碳钢腐蚀行为的研究进展[J].腐蚀科学与防护技术,2015,27(5):497-502. 被引量:7

2赵飞,李娟.惰气熔融-红外法测定铪中氢含量[J].有色金属科学与工程,2017,8(6):117-120. 被引量:1

3陆科呈,杨鸿驰,刘俊生,兰标景.热导法测定航空用铝合金中氢含量[J].化学分析计量,2018,27(3):44-47.

4杨瑞杰,蒋永光,石良.微生物与核废料的长期管理[J].地球科学,2018,43(A01):127-135.

5刘灿帅,田朝晖,张志明,王俭秋,韩恩厚.地质处置后期无氧阶段X65低碳钢腐蚀行为研究[J].腐蚀科学与防护技术,2019,31(4):371-378.

6李凤侠,张俊,赵呈刚.基于文献计量学的氢脆研究的演进、热点和趋势分析[J].材料导报,2019,33(S02):488-496. 被引量:4

7张琦超,黄彦良,许勇,杨丹,路东柱.高放射性核废料钛储罐深地质环境中氢吸收及氢脆研究进展[J].中国腐蚀与防护学报,2020,40(6):485-494. 被引量:1

8刘攀,杜丽丽,唐伟,李治亚.无机固态材料中气体元素分析的现状与进展[J].理化检验:化学分册,2015,51(1):131-136. 被引量:9

1卞敏,纪新华,李英秋,武红英.V-5Cr-5Ti合金中杂质元素氧、氮、氢的测定[J].核化学与放射化学,2016,38(4):219-224.

2何丽君,霍彩霞,李生英,姚小军,杨彩玲,徐飞.柚皮苷与人血清白蛋白相互作用的研究[J].化学研究与应用,2014,26(8):1195-1199. 被引量:4

3马浚,唐元明,张勤英,龚有进.固相微萃取-气相色谱联用技术分析混合气体中微量氢[J].分析测试技术与仪器,2007,13(3):182-186. 被引量:1

4周海收,温美娟,辛仁轩.低温堆水样中微量氢的测定[J].分析试验室,1995,14(6):56-59. 被引量:2

5姜镭,辛仁轩.反应堆冷却水中微量氢的顶空气相色谱测定[J].分析试验室,1997,16(3):48-50. 被引量:1

6陈美春,朱杰丽.氢化物原子荧光光谱法测定土壤中的汞的不确定度评定[J].分析试验室,2008,27(B12):432-435. 被引量:3

7汪涛.化学实验计算的新要求[J].中学理科:高中内容,2002(7):35-36.

8张洁,陈俞霖,朱永,骆飞.Photo-induced currents in CNT films/Al large area multiwalled Structure[J].中国光学快报:英文版,2014,0(A01):15-18.

9陈平,任兴碧,肖成建,曹大伟,冉光明,刘云怒,夏修龙,陈晓军,王和义.氧化锆检测器在微量氢同位素色谱分析中的应用研究[J].原子能科学技术,2017,51(4):603-608. 被引量:2

10孟庆强,金之钧,刘文汇,陶成,把立强,杨华敏.MAT253气体同位素质谱仪测定微量氢同位素组成进样方法初探[J].岩矿测试,2010,29(6):639-642. 被引量:3

Basic Information:

DOI:

Chinese Library Classification Number:O659.33[理学—分析化学]

Citation Information:

The mass fraction of the hydrogen in high-purity titanium metal was determined by high frequency induction-thermal conductivity method. The influences of induction current, crucible material, fluxing agent,blank value,minimum analysis time and sample weight on the determined result were emphatically discussed. And a method to determine the hydrogen in high-purity titanium metal was established. The results show that the relative standard deviation of the hydrogen mass fraction determined by the above method is 6. 3%, and the recovery of standard addition is 98%-106%. The determination conditions of partial hydrogen content in titanium metal were studied by a combined analysis program. Based on peak separation experiments, each partial hydrogen content was calculated.

quote

GB/T 7714-2015 [1] BIAN Min, LI Ying-qiu, LIU Jun, et al. Determination of Trace Hydrogen in High-purity Titanium Metal[J]. Rare Metals and Cemented Carbides, 2009(4): 36-40.
MLA [1] BIAN Min, et al., "Determination of Trace Hydrogen in High-purity Titanium Metal." Rare Metals and Cemented Carbides, no. 4, 2009, pp. 36-40.
APA [1] BIAN Min, LI Ying-qiu, LIU Jun, & DUAN Li-mei. (2009). Determination of Trace Hydrogen in High-purity Titanium Metal. Rare Metals and Cemented Carbides(4), 36-40.
IEEE [1] BIAN Min, LI Ying-qiu, LIU Jun, and DUAN Li-mei, "Determination of Trace Hydrogen in High-purity Titanium Metal," Rare Metals and Cemented Carbides, no. 4, pp. 36-40, 2009. keywords: {high-purity titanium metal;trace hydrogen;partial hydrogen content;high frequencyinductionthermal conductivity method}