Study on Friction and Wear Characteristics of WC-(Co-Mo-Ni)Cemented Carbide AITranslate
Abstract AITranslate
WC based cemented carbide with Co-Mo-Ni new bonding phase was prepared by spark plasma sintering.The friction and wear characteristics of the new bonding phase cemented carbide and TC4/GCr15 friction pairs were studied by using the ball-face friction mode on UMT—2 friction and wear testing machine.The results show that under the same friction condition,the friction coefficient of the cemented carbide is large in the most cases when TC4 is used as a dual part,and the wear form is mainly adhesive wear with lower load,while abrasive wear occurs on the basis of adhesive wear with higher load.When GCr15 is used as a dual part,the wear form is mainly plastic deformation with lower load,and local abrasive wear occurs with higher load.After abrasive wear,the plastic deformation on surface of the cemented carbide is significantly reduced,and the wear rate also decreases.
KeyWords AITranslate
1龙坚战,陆必志,易茂中,陈飞.新型粘结相硬质合金的研究进展[J].硬质合金,2015,32(3):204-212. 被引量：26
2向新,董定乾,顾金宝,杨伟,谌理飞,时凯华,赵易.双尺度结构WC-6%Co硬质合金球磨工艺研究[J].稀有金属与硬质合金,2021,49(2):82-89. 被引量：2
3郐吉才.纳米硬质合金和岩石的摩擦磨损与切削性能[J].复合材料学报,2013,30(S1):230-235. 被引量：3
4郐吉才,张飞虎.纳米硬质合金摩擦磨损与切削性能研究[J].摩擦学学报,2011,31(1):18-23. 被引量：7
5朱章杨,莫继良,王东伟,李建熹,陈光雄,朱旻昊.沟槽对界面振动及摩擦磨损特性的影响[J].摩擦学学报,2017,37(4):551-557. 被引量：6
6刘育林,朱圣宇,于源,程军,宋承立,乔竹辉,胡斌.铝掺杂WC-Co基硬质合金的高温摩擦学性能、磨损机理及抗氧化性能研究[J].摩擦学学报,2019,39(5):565-576. 被引量：6
7林国志,梁良.表面微织构对WC-8Co在往复摩擦磨损中粘结-扩散磨损特性的影响[J].摩擦学学报,2021,41(5):657-668. 被引量：6
8陈小怡,黄华伟,洪震.Y_2O_3对硬质合金晶粒尺寸和摩擦磨损性能的影响[J].粉末冶金技术,2015,33(1):35-38. 被引量：4
9Haibin Wang,Mark Gee,Qingfan Qiu,Hannah Zhang,Xuemei Liu,Hongbo Nie,Xiaoyan Song,Zuoren Nie.Grain size effect on wear resistance of WC-Co cemented carbides under different tribological conditions[J].材料科学技术：英文版,2019,35(11):2435-2446. 被引量：5
10羌俊杰,许宏宇,倪鸿,余斌,汪振华.基于TiAl-xCo-Mo-Ni复合粘结相的WC基超细晶硬质合金微观组织和力学性能研究[J].稀有金属与硬质合金,2021,49(2):69-75. 被引量：2
1倪莹驰,江佳阳,董凯林,时凯华.不同添加剂对(W,Mo)C-6%Ni合金性能的影响[J].硬质合金,2022,39(2):118-126.
2王婷,车治强,杨吉春,刘香军,杨昌桥.稀土Y对GCr15轴承钢疲劳性能与耐磨性能的影响[J].稀有金属与硬质合金,2023,51(2):54-59.
1李颂华,隋阳宏,孙健,夏忠贤,王俊海.干摩擦工况下Si_(3)N_(4)/PTFE配副材料摩擦磨损特性与转移膜形成分析[J].润滑与密封,2022,47(1):53-59.
2汪中玮,刘海军.碳含量和球磨时间对Fe-Co-Ni粘结相硬质合金性能的影响[J].硬质合金,2021,38(5):332-337.
3陈振磊,喻琛,邵鸣宇.不同粘结相硬质合金的研究进展[J].机械研究与应用,2021,34(5):204-209. 被引量：2
4王伟,程鹏,李小磊,高原,王快社.Ni含量对镍钛合金的力学和摩擦学性能的影响[J].稀有金属材料与工程,2021,50(12):4418-4428.
5冯小亮,郭策安,赵万江,王猛.载荷和温度对B5铜合金材料摩擦磨损性能的影响[J].热加工工艺,2021,50(24):65-68. 被引量：4
6杨杰,张双江.立式刮刀卸料离心机分体式钟形罩结构设计研究[J].选煤技术,2021,49(6):24-28.
7瞿磊,蒋安,王忠,谢纬安.润滑条件与缸套材料对活塞环-缸套摩擦磨损特性的影响[J].机械工程材料,2021,45(12):36-41. 被引量：1
8梁伟印,梁国星,董黎君,刘东刚,王时英.YG8硬质合金表面激光熔覆WC/TiC/Co涂层的组织及性能[J].金属热处理,2021,46(12):168-174. 被引量：1
9刘源,丁继成,许雨翔,张宝荣,赵志勇,冯利民,郑军,王启民.电弧离子镀和高功率脉冲磁控溅射AlTiN涂层及其切削性能研究[J].表面技术,2022,51(2):57-65. 被引量：1
10吕思佳,吴月燕,贾永红,何凡,蒋宝鑫,杨国霞,谢晓鸿.云锦杜鹃苯丙氨酸解氨酶基因的克隆及功能分析[J].生物工程学报,2022,38(1):374-385. 被引量：8
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
WC based cemented carbide with Co-Mo-Ni new bonding phase was prepared by spark plasma sintering.The friction and wear characteristics of the new bonding phase cemented carbide and TC4/GCr15 friction pairs were studied by using the ball-face friction mode on UMT—2 friction and wear testing machine.The results show that under the same friction condition,the friction coefficient of the cemented carbide is large in the most cases when TC4 is used as a dual part,and the wear form is mainly adhesive wear with lower load,while abrasive wear occurs on the basis of adhesive wear with higher load.When GCr15 is used as a dual part,the wear form is mainly plastic deformation with lower load,and local abrasive wear occurs with higher load.After abrasive wear,the plastic deformation on surface of the cemented carbide is significantly reduced,and the wear rate also decreases.
quote
| GB/T 7714-2015 | [1] QIANG Jun-jie, WANG Zhen-hua. Study on Friction and Wear Characteristics of WC-(Co-Mo-Ni)Cemented Carbide[J]. Rare Metals and Cemented Carbides, 2021(6): 85-93. |
| MLA | [1] QIANG Jun-jie, and WANG Zhen-hua. "Study on Friction and Wear Characteristics of WC-(Co-Mo-Ni)Cemented Carbide." Rare Metals and Cemented Carbides, no. 6, 2021, pp. 85-93. |
| APA | [1] QIANG Jun-jie, & WANG Zhen-hua. (2021). Study on Friction and Wear Characteristics of WC-(Co-Mo-Ni)Cemented Carbide. Rare Metals and Cemented Carbides(6), 85-93. |
| IEEE | [1] QIANG Jun-jie and WANG Zhen-hua, "Study on Friction and Wear Characteristics of WC-(Co-Mo-Ni)Cemented Carbide," Rare Metals and Cemented Carbides, no. 6, pp. 85-93, 2021. keywords: {Co-Mo-Ni;cemented carbide;friction and wear characteristic;friction coefficient;wear rate;TC4;GCr15} |