Study of Preparation of High-temperature and Anti-oxidized Modified Si-Cr-Ti Coating by Slurry Sintering AITranslate
Abstract AITranslate
The high-temperature anti-oxidized Si-Cr-Ti coating improved on C-103 niobium alloy is prepared by slurry sintering with the addition of active Zr element and Y_2O_3.Static anti-oxidization test at 1 200 ℃,thermal shock test from room temperature up to 1 200℃ and intermittent oxidization weighting test at 1 200℃ were made.Investigation is made into the morphology, structure,and element distribution and phase distribution of the coating by SEM,EDS,and XRD.The results showed that the coating consists of tow layers.The out layer,the main body of the coating,is made of the complex phase of(Nb,Cr,Ti,Zr)Si_2, the inner layer,the intermediate diffusion transition layer,is made of the dense NbSi_2 phase and associated with minor amount of Nb_5Si_3.The addition of modified Zr and Y_2O_3 can increase the density of the coating and widen the diffusion transition layer to improve the anti-oxidation properties of the coating system with flat interface between the diffusion transition layer and the substrate/main body of the coating.The diffusion transition layer is dense and can effectively prevent the further extension of cracks and oxygen diffusion into the substrate.
KeyWords AITranslate
1冯景苏.铌应用的新进展[J].稀有金属材料与工程,1994,23(3):7-12. 被引量：29
2傅恒志.未来航空发动机材料面临的挑战与发展趋向[J].航空材料学报,1998,18(4):52-61. 被引量：126
3屈乃琴.钽铌及其合金与应用[J].稀有金属与硬质合金,1998,26(2):48-54. 被引量：29
4Distefano J R.Oxidation of refractory metals in air and oxygen at low pressure[J].Refractorg Metals and Hard Materials,2000,18(4-5):237.
5美国国家材料咨询委员会 金石 译.高温抗氧化涂层[M].北京:科学出版社,1980..
6上海科学技术情报研究所.难熔金属及其合金的防护涂层[Z].上海:上海科学技术情报研究所,1974..
7Terentieva V.Silicide coatings for protection of miobium base alloys[J].Metal Powder Report,2003,58(6):53.
8Bosu S N,et al.Formation of mullite coatings on silicon-based ceramics by chemical rapor depositiom[J].International Journal of Refractorg Metals and Hard Materials,1998,16(4-6):343.
9科洛梅采夫ΠT.耐热扩散涂层[M].北京:国防工业出版社,1988.94.
10沈以赴,陈继志,冯钟潮,梁勇.稀土在激光熔覆涂层中的分布和行为[J].中国稀土学报,1997,15(4):344-349. 被引量：39
1刘超锋,林茹,孟庆乐.金属基体陶瓷涂料的研究与应用[J].涂料工业,2007,37(9):61-64. 被引量：7
2蔡圳阳,肖来荣,余宸旭,刘赛男,毛海军,曾德露.Nb-Ti-Al合金及其硅化物涂层的高温氧化行为[J].粉末冶金材料科学与工程,2013,18(1):94-101. 被引量：6
3田进鹏,周小军,赵刚.航天发动机用铌钨合金高温抗氧化复合涂层的制备研究[J].稀有金属与硬质合金,2016,44(2):18-21. 被引量：4
4唐新阳,沈统,肖来荣,蔡圳阳,赵小军,饶博.Nb521表面改性Si-Cr-Ti涂层的高温氧化行为[J].腐蚀与防护,2016,37(5):392-397. 被引量：1
5田进鹏,周小军,赵刚,王立斐,王蓉,张丽.铌钨合金抗高温氧化硅化物涂层的性能[J].材料保护,2016,49(5):8-11. 被引量：4
6王进卿,池作和,袁益超,俞家豪,张光学.锅炉受热面复合陶瓷涂层抗高温SO_2腐蚀性能[J].化工学报,2017,68(11):4221-4228. 被引量：6
7董凯,赵刚,周小军,王立斐.航空航天用新型Ta10W合金复合高温抗氧化涂层[J].云南冶金,2018,47(1):50-56. 被引量：4
8马晓波,王进卿,池作和,张光学,詹明秀.h-BN基复合陶瓷涂层防锅炉受热面的硫酸盐腐蚀性能[J].材料导报,2019,33(6):960-964. 被引量：3
1贺大鹏.多元素共渗硅化钼涂层的成型过程和失效机理研究[J].工业技术创新,2021,8(5):36-40.
2崔学军,李国军,任瑞铭.甲基三甲氧基硅烷改性工业硅溶胶的工艺及其机理[J].材料科学与工程学报,2012,30(4):528-532. 被引量：6
3吕艳红,吴子健,张启富.铌合金抗高温氧化涂层研究现状及发展趋势[J].热喷涂技术,2015,7(1):11-17. 被引量：13
4牙亚萌,张胜利,李唯,张镓远,陈彬源,李浩.高温、含H_2S环境的设备内壁陶瓷金属涂层防腐技术[J].天然气与石油,2016,34(2):72-77. 被引量：7
5唐新阳,沈统,肖来荣,蔡圳阳,赵小军,饶博.Nb521表面改性Si-Cr-Ti涂层的高温氧化行为[J].腐蚀与防护,2016,37(5):392-397. 被引量：1
6汪欣,李争显,杜继红,王少鹏.难熔金属表面高温防护涂层研究进展与技术展望[J].装备环境工程,2016,13(3):1-11. 被引量：19
7陈子辉,刘仲阳,林家祥.柔性有机硅陶瓷面漆的理论及应用探索[J].涂料技术与文摘,2017,38(10):1-5. 被引量：7
8陈子辉,刘仲阳,林家祥.有机硅陶瓷涂料的研究进展[J].涂料工业,2017,47(11):1-7. 被引量：7
9赵刚,周小军,张静,董凯.Nb-Ti-Al基合金防护涂层制备及其抗氧化机理研究[J].粉末冶金技术,2017,35(5):347-351. 被引量：6
10曹艳平,姚红艳.陶瓷金属防腐涂料在高含硫天然气处理厂设备内防腐的应用[J].化工管理,2017(30):177-177. 被引量：1
1徐志昌,张萍.液—固掺杂垂熔钨坯中改性元素的行为[J].粉末冶金技术,1992,10(4):243-247. 被引量：5
2赵群,邱竹贤,王兆文.铝电解惰性阳极的材料设计[J].轻金属,2001(11):42-44. 被引量：7
3肖来荣,李威,许谅亮,蔡圳阳,毛海军,殷傲宇.铌合金表面硅化物涂层的界面结构[J].粉末冶金材料科学与工程,2011,16(6):843-848. 被引量：8
4高培明,尹涛,薛卫.硬质合金类烟机配件的性能改善[J].中国材料科技与设备,2009,6(2):75-77. 被引量：3
5陈慧,栾道成,王正云,陈勤文,李重典.抑制剂对超细WC-Co硬质合金性能的影响[J].中国钨业,2011,26(1):34-37. 被引量：4
6П.П.Чернов.采用颗粒镁生产优质钢[J].现代冶金（内蒙古）,2004(1):36-37.
7肖来荣,许谅亮,易丹青,蔡志刚,王小宁.复合包渗法制备铌合金表面硅化物涂层[J].航空材料学报,2007,27(4):36-41. 被引量：2
8温玉婷,黄洁敏,郑海忠.Nb/NbCr_2合金表面激光熔覆抗氧化涂层的研究进展[J].新技术新工艺,2011(5):81-84.
9范景莲,汪登龙,刘涛.细晶钨合金制备工艺的研究[J].兵器材料科学与工程,2006,29(2):1-5. 被引量：18
10李娜,王淞彦,白兵.高温下含铜钢的氧化行为[J].辽宁科技大学学报,2017,40(1):1-5. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TF125.242[冶金工程—粉末冶金]
Citation Information:
The high-temperature anti-oxidized Si-Cr-Ti coating improved on C-103 niobium alloy is prepared by slurry sintering with the addition of active Zr element and Y_2O_3.Static anti-oxidization test at 1 200 ℃,thermal shock test from room temperature up to 1 200℃ and intermittent oxidization weighting test at 1 200℃ were made.Investigation is made into the morphology, structure,and element distribution and phase distribution of the coating by SEM,EDS,and XRD.The results showed that the coating consists of tow layers.The out layer,the main body of the coating,is made of the complex phase of(Nb,Cr,Ti,Zr)Si_2, the inner layer,the intermediate diffusion transition layer,is made of the dense NbSi_2 phase and associated with minor amount of Nb_5Si_3.The addition of modified Zr and Y_2O_3 can increase the density of the coating and widen the diffusion transition layer to improve the anti-oxidation properties of the coating system with flat interface between the diffusion transition layer and the substrate/main body of the coating.The diffusion transition layer is dense and can effectively prevent the further extension of cracks and oxygen diffusion into the substrate.
quote
| GB/T 7714-2015 | [1] XIAO Lai-rong, CAI Zhi-gang, YI Dan-qing, et al. Study of Preparation of High-temperature and Anti-oxidized Modified Si-Cr-Ti Coating by Slurry Sintering[J]. Rare Metals and Cemented Carbides, 2005(2): 23-27. |
| MLA | [1] XIAO Lai-rong, et al., "Study of Preparation of High-temperature and Anti-oxidized Modified Si-Cr-Ti Coating by Slurry Sintering." Rare Metals and Cemented Carbides, no. 2, 2005, pp. 23-27. |
| APA | [1] XIAO Lai-rong, CAI Zhi-gang, YI Dan-qing, & XIANG Chao-jian. (2005). Study of Preparation of High-temperature and Anti-oxidized Modified Si-Cr-Ti Coating by Slurry Sintering. Rare Metals and Cemented Carbides(2), 23-27. |
| IEEE | [1] XIAO Lai-rong, CAI Zhi-gang, YI Dan-qing, and XIANG Chao-jian, "Study of Preparation of High-temperature and Anti-oxidized Modified Si-Cr-Ti Coating by Slurry Sintering," Rare Metals and Cemented Carbides, no. 2, pp. 23-27, 2005. keywords: {slurry sintering;niobium alloy;improved Si-Cr-Ti;high-temperature anti-oxidized coating} |