Effect of Ti(CN) Content on the Gradient Structure and Properties of Cemented Carbides AITranslate
Abstract AITranslate
<Abstrcat>Study is made of the effect of Ti(CN) content on the structure and mechanical property of cemented carbides through tests by stepwise sintering and with different Ti(CN) contents.The test results showed that the increasing of Ti(CN) content can result in thicker gradient layer,larger hardness,greater magnetic force and lower strength and density.
KeyWords AITranslate
1Upadhyaya A,et al.Advances in sintering hard metals[J].Materials and Design, 2001, 22(6):499.
2程继贵,王华林,夏永红,蒋阳.功能梯度硬质合金和金属陶瓷材料研究的新进展[J].材料导报,2000,14(4):16-17. 被引量：19
3Tsuda K,et al.Development of functionally graded sintered hard materials[J].Powder Metallurgy,1996,39(4):296.
4Rosso M,et al.Studies of graded cemented carbides components[J].International Journal of Refractory Metals & Hard Materials,1999,17(1-3):187.
5Andren Hans-Olof.Microstructure development during sintering and heat-treatment of cemented carbides and cermets[J].Materials Chemistry and Physics, 2001,67(1-3):209.
6张立.相图在硬质合金成分与工艺设计中的应用[J].硬质合金,2000,17(2):69-71. 被引量：5
7Walter Lengauer,et al.Functionally graded hardmetals[J].Journal of Alloys and Compounds, 2002,338(1-2): 194.
8张伟.功能梯度材料的研究现状和前景[J].自然杂志,1995,17(4):216-216.
9Milman Yu V,et al.PM special feature,rock tools leads the way in drilling[J].Metal Powder Report,1992,47(12):48.
10Milman Yu V,et al.Influence of temperature,grain size and cobalt content on the hardness of WC-Co alloys[J].International Journal of Refractory Metals & Hard Materials, 1999, 17(1):39.
1曹鼎,熊计,郭智兴.表面脱β层梯度结构硬质合金研究进展[J].硬质合金,2006,23(1):38-41. 被引量：2
2蔡俊,丰平,贺跃辉.烧结工艺对梯度结构硬质合金梯度层组织和厚度的影响[J].硬质合金,2007,24(2):91-95. 被引量：12
3丰平,贺跃辉,肖逸锋,谢宏.表面无立方相层功能梯度硬质合金的研究进展[J].中国有色金属学报,2007,17(8):1221-1231. 被引量：21
4史留勇,刘义敏,张守全,黄继华,张华,赵兴科.脱β层梯度硬质合金的制备及组织结构[J].粉末冶金材料科学与工程,2011,16(1):67-72. 被引量：10
5陈伟民,徐涛,张伟彬,张颢,杜勇,谭澄宇,陈利,张忠建,刘向中.梯度硬质合金梯度层形成的计算机模拟及验证[J].中国有色金属学报,2012,22(5):1440-1447.
6杨天恩,SUN Lan,熊计,GUO Zhixing,ZHENG Xiaoming.Microstructure and Properties of Gradient Cemented Carbide with Nano-TiN[J].武汉理工大学学报：材料科学英文版,2014(1):102-108. 被引量：2
7唐思文,刘德顺,李鹏南,唐文波,唐德.TiCN基梯度功能金属陶瓷的制备及其切削性能[J].功能材料,2014,45(13):13126-13130. 被引量：10
8张聪,张伟彬,彭英彪,陈伟民,周鹏,陈利,张利军,刘树红,杜勇,王社权.硬质合金相图热力学和扩散动力学数据库及其应用[J].中国材料进展,2015,34(1):1-14. 被引量：2
9邹伶俐.Ti(C,N)含量对硬质合金脱β层的形成及其CVD涂层刀具切削性能的影响[J].粉末冶金技术,2015,33(2):116-120. 被引量：10
10Tian-En Yang,Lan Sun,Ji Xiong,Zhi-Xing Guo,Lei Wang,Ding Cao.Adherent coating on gradient cemented carbide with ultrafine Ti(C_(0.5),N_(0.5))[J].稀有金属：英文版,2015,0(6):413-420. 被引量：4
1崔岩,王利成,董常青,董俐言,齐明慧.累积叠轧制备Ni/Al多层复合材料[J].热加工工艺,2019,0(24):78-80. 被引量：2
2陈巧旺,刘兵,姜中涛,李力.表层富立方相功能梯度硬质合金的烧结工艺[J].材料科学与工程学报,2014,32(1):93-97. 被引量：5
3史留勇,黄继华,林彬,王娟,罗洪峰,陈致水.烧结温度对不含氮原料制备的脱β层梯度硬质合金的影响[J].稀有金属与硬质合金,2015,43(3):50-53.
4蔡俊,丰平,贺跃辉.烧结工艺对梯度结构硬质合金梯度层组织和厚度的影响[J].硬质合金,2007,24(2):91-95. 被引量：12
5陈巧旺,蒋显全.烧结制备含Ti功能梯度硬质合金的研究进展[J].硬质合金,2010,27(4):247-251. 被引量：3
6史留勇,张守全,黄继华.WC-Co功能梯度硬质合金研究进展[J].粉末冶金技术,2010,28(4):305-312. 被引量：15
7史留勇,刘义敏,张守全,黄继华,张华,赵兴科.脱β层梯度硬质合金的制备及组织结构[J].粉末冶金材料科学与工程,2011,16(1):67-72. 被引量：10
8史留勇,刘义敏,张守全,黄继华,赵兴科,张华.烧结工艺对脱β层梯度硬质合金梯度结构的影响[J].北京科技大学学报,2011,33(4):462-467. 被引量：4
9陈巧旺,蒋显全,姜爱民.渗氮烧结的YT15梯度硬质合金微观组织[J].粉末冶金材料科学与工程,2011,16(3):437-441. 被引量：6
10陈巧旺,姜中涛,邓莹,李力,陈慧.梯度硬质合金表面的氮势控制[J].重庆文理学院学报：自然科学版,2011,30(5):41-43. 被引量：2
1张武装,刘咏,贺跃辉,王海兵.Co含量对硬质合金梯度结构和性能的影响[J].中国钨业,2004,19(6):34-37. 被引量：11
2曹金祥.烧结机的扩容及分段烧结技术改造[J].中国冶金,2007,17(7):23-26.
3张武装,刘咏,贺跃辉,黄伯云.一种特殊烧结技术对梯度结构硬质合金性能影响的研究[J].功能材料,2007,38(2):292-294. 被引量：1
4张武装,刘咏,贺跃辉,羊建高,龙郑易.具有梯度结构的涂层硬质合金刀片[J].中国有色金属学报,2005,15(5):757-762. 被引量：18
5陈兆平,徐迎铁,顾磊明.超纯铁素体不锈钢夹杂物控制的研究进展[J].世界钢铁,2010,10(5):1-11. 被引量：9
6刘承军,孙丽枫,毛天成,张宁,白国林.TiO_2,TiN和Ti(CN)对连铸保护渣粘性特征的影响[J].工业加热,2007,36(6):23-24. 被引量：3
7顾磊明,陈兆平,徐迎铁,疏达.含钛超纯铁素体不锈钢的铝脱氧及钙处理实验研究[J].特殊钢,2011,32(1):48-51. 被引量：7
8张杰,刘灿楼,胡镇华.碳量对Ti(CN)基金属陶瓷组织和性能的影响[J].粉末冶金技术,1997,15(2):122-125. 被引量：12
9张洁尧.碳含量对Ti(CN)基金属陶瓷力学性能的影响[J].硬质合金,2003,20(3):154-156. 被引量：3
10袁国翠,丁跃华,代林晴.高炉炉衬侵蚀机理的研究[J].矿冶,2013,22(4):84-90. 被引量：7
Basic Information:
DOI：
Chinese Library Classification Number:TF125.3[冶金工程—粉末冶金]
Citation Information:
<Abstrcat>Study is made of the effect of Ti(CN) content on the structure and mechanical property of cemented carbides through tests by stepwise sintering and with different Ti(CN) contents.The test results showed that the increasing of Ti(CN) content can result in thicker gradient layer,larger hardness,greater magnetic force and lower strength and density.
quote
| GB/T 7714-2015 | [1] ZHANG Wu-zhuang, LIU Yong, HE Yue-hui, et al. Effect of Ti(CN) Content on the Gradient Structure and Properties of Cemented Carbides[J]. Rare Metals and Cemented Carbides, 2005(2): 28-30. |
| MLA | [1] ZHANG Wu-zhuang, et al., "Effect of Ti(CN) Content on the Gradient Structure and Properties of Cemented Carbides." Rare Metals and Cemented Carbides, no. 2, 2005, pp. 28-30. |
| APA | [1] ZHANG Wu-zhuang, LIU Yong, HE Yue-hui, & WANG Hai-bing. (2005). Effect of Ti(CN) Content on the Gradient Structure and Properties of Cemented Carbides. Rare Metals and Cemented Carbides(2), 28-30. |
| IEEE | [1] ZHANG Wu-zhuang, LIU Yong, HE Yue-hui, and WANG Hai-bing, "Effect of Ti(CN) Content on the Gradient Structure and Properties of Cemented Carbides," Rare Metals and Cemented Carbides, no. 2, pp. 28-30, 2005. keywords: {Ti(CN);cemented carbide;step-wise sintering;gradient structure} |