Preparation of the Compound Carbide(W-Ti-Ta-Nb)C by Direct Reduction AITranslate
Abstract AITranslate
The compound carbide （W-Ti-Ta-Nb）C was prepared by direct reduction. The influences of different calcination temperature and duration and mixing time on the contents of solid solution phase,combined carbon and free carbon in the prepared （W-Ti-Ta-Nb）C were investigated. By orthogonal experiments, the optimal carbonization parameters are obtained as follows：calcination temperature 2 100℃ ,calcination duration 50min and mixing duration 3 h. The final product is completely in the state of solid solution phase,where the content of combined carbon is 10.67% and free carbon is 0.15%.
KeyWords AITranslate
1徐磊,B.S.Majumdar,Darrell Marchant,Lawrence Matson.碳化钽粉末的爆炸成形方法[J].材料工程,2007,35(z1):127-130. 被引量：1
2欧阳亚非,邬荫芳,彭泽辉.WC-Co复合粉末的流态化合成及其应用[J].中国钨业,1999,14(5):210-215. 被引量：17
3高海燕,张武装,曹顺华.机械合金化制备纳米WC硬质合金粉的研究[J].稀有金属与硬质合金,2002,30(3):29-32. 被引量：12
4相华,徐永东,张立同,成来飞.液相先驱体转化法制备TaC抗烧蚀材料[J].无机材料学报,2006,21(4):893-898. 被引量：22
5王柱,魏明坤,毛京元,张跃.超细碳化钨钴复合粉末的合成[J].硬质合金,1996,13(1):20-22. 被引量：7
1翟健,张峰,孙智宇,李红艳,王朝旭,崔建国.基底材质对于BDD电极电解含溴水时溴酸盐生成的影响[J].应用化工,2020,49(3):555-560.
1宋安国.亚微米级碳化钨的生产工艺[J].中国钨业,1994,0(5):19-20.
2陈为亮,钟海云,戴永年.超细碳化物粉末的制取方法[J].稀有金属与硬质合金,1998,26(4):36-41. 被引量：9
3谢海根.高化合碳碳化钨的试制[J].江西冶金,1998,18(6):29-30.
4闵义,王德永,刘承军,姜茂发.发泡剂对高碱度LF精炼渣泡沫化性能的影响[J].材料与冶金学报,2008,7(1):10-14.
5杨阳.日本切削刀具产量又创新记录[J].中国钨业,1989(11):33-34.
6曹运涛,孙风晓.济钢大板坯连铸机粘结漏钢原因分析[J].山东冶金,2005,27(4):28-30.
7陈荣欢,朱祖民,职建军,冯长宝.宝钢超低碳钢保护渣的开发[J].炼钢,2007,23(2):14-17. 被引量：6
8彭晟.热处理对双相不锈钢AT25-6组织和性能的影响[J].重庆钢研,2003(28):21-26.
9姜方新.高硅复合冷却剂的开发[J].攀钢技术,1998(6):65-67.
10郑树林.烧结前压坯中O/C_游比对真空烧结YT合金性能的影响[J].粉末冶金技术,1989,7(1):14-17. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TF123.31[冶金工程—粉末冶金]
Citation Information:
The compound carbide （W-Ti-Ta-Nb）C was prepared by direct reduction. The influences of different calcination temperature and duration and mixing time on the contents of solid solution phase,combined carbon and free carbon in the prepared （W-Ti-Ta-Nb）C were investigated. By orthogonal experiments, the optimal carbonization parameters are obtained as follows：calcination temperature 2 100℃ ,calcination duration 50min and mixing duration 3 h. The final product is completely in the state of solid solution phase,where the content of combined carbon is 10.67% and free carbon is 0.15%.
quote
| GB/T 7714-2015 | [1] WANG Hong-bin, ZHONG Hui, DAI Yan-yang. Preparation of the Compound Carbide(W-Ti-Ta-Nb)C by Direct Reduction[J]. Rare Metals and Cemented Carbides, 2009(4): 18-21. |
| MLA | [1] WANG Hong-bin, et al., "Preparation of the Compound Carbide(W-Ti-Ta-Nb)C by Direct Reduction." Rare Metals and Cemented Carbides, no. 4, 2009, pp. 18-21. |
| APA | [1] WANG Hong-bin, ZHONG Hui, & DAI Yan-yang. (2009). Preparation of the Compound Carbide(W-Ti-Ta-Nb)C by Direct Reduction. Rare Metals and Cemented Carbides(4), 18-21. |
| IEEE | [1] WANG Hong-bin, ZHONG Hui, and DAI Yan-yang, "Preparation of the Compound Carbide(W-Ti-Ta-Nb)C by Direct Reduction," Rare Metals and Cemented Carbides, no. 4, pp. 18-21, 2009. keywords: {direct reduct ion;orthogonal experiment;compound carbide （W-Ti-Ta-Nb）C} |