daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper
English
Chinese 简体中文 English English
Home > Journals > Rare Metals and Cemented Carbides
‹ Previous Article Next Article ›

Study on Extrusion Process of the Aerospace Alloy Ingot NbHf10-1 AITranslate

YANG Xiao-wei; WANG Fei; LI Gao-lin; WU Yu
Xi'an Noble Rare and Precious Metal Materials Co., Ltd.;Xi'an Noble Rare and Precious Metal Materials Co., Ltd.;Xi'an Noble Rare and Precious Metal Materials Co., Ltd.;Xi'an Noble Rare and Precious Metal Materials Co., Ltd.
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The extrusion process of the alloy ingot NbHf10-1was studied.The results show that the extrusion ingot with good surface quality can be obtained when the extrusion ratio is lower than 5∶1and extrusion temperature is 980~1 320 ℃.Using the extrusion rectangular bar to roll NbHf10-1alloy sheet,both finished product ratio and production efficiency of rolling can be improved.

KeyWords AITranslate

NbHf10-1 alloy extrusion process extrusion ratio extrusion temperature finished product ratio

1赵飞,杨军红,李娟.红外/热导法检测C-103中氧氮含量[J].分析仪器,2018(1):109-113.

1隋里,任政,房灿峰,吴友芳,张兴国.热处理对挤压变形电磁连铸AZ61镁合金的影响[J].特种铸造及有色合金,2010(6):540-543. 被引量：1

2王自焘,刘景茹.铝挤压锭半连续铸造工艺研究和发展(Ⅰ)[J].铝加工,1996,19(1):10-10.

3王自焘,刘景茹.铝挤压锭半连续铸造工艺研究和发展(2)[J].铝加工,1996,19(2):6-13.

4王自焘,刘景茹.铝挤压锭半连续铸造工艺研究和发展[J].特种铸造及有色合金,1996,16(2):20-24. 被引量：6

5David V.Neff,张发明.挤压锭DMC多铸次除气过滤法[J].轻金属,1992(7):59-63.

6Gunther Hertwich,孟凡杰.用水平铸造法生产挤压锭的紧凑型熔铸系统[J].轻合金加工技术,1991,19(10):23-25.

7王祝堂.阿莱克辛挤压锭公司——优秀的绿色铝合金熔铸企业[J].轻合金加工技术,2010,38(10):1-3.

8王祝堂.美国MI金属公司增建挤压锭加热-剪切系统[J].轻合金加工技术,2006,34(1):52-52.

9西北铝将成为高端反向挤压铝材生产基地[J].轻合金加工技术,2011,39(12):50-50.

10杨荣东,唐剑.6005A铝合金扁挤压锭裂纹原因及防止[J].铝加工,2006,29(5):20-22.

Basic Information:

DOI：

Chinese Library Classification Number:TG379[金属学及工艺—金属压力加工];V261[航空宇航科学与技术—航空宇航制造工程]

Citation Information:

The extrusion process of the alloy ingot NbHf10-1was studied.The results show that the extrusion ingot with good surface quality can be obtained when the extrusion ratio is lower than 5∶1and extrusion temperature is 980~1 320 ℃.Using the extrusion rectangular bar to roll NbHf10-1alloy sheet,both finished product ratio and production efficiency of rolling can be improved.

quote

GB/T 7714-2015 [1] YANG Xiao-wei, WANG Fei, LI Gao-lin, et al. Study on Extrusion Process of the Aerospace Alloy Ingot NbHf10-1[J]. Rare Metals and Cemented Carbides, 2015(3): 44-45.
MLA [1] YANG Xiao-wei, et al., "Study on Extrusion Process of the Aerospace Alloy Ingot NbHf10-1." Rare Metals and Cemented Carbides, no. 3, 2015, pp. 44-45.
APA [1] YANG Xiao-wei, WANG Fei, LI Gao-lin, & WU Yu. (2015). Study on Extrusion Process of the Aerospace Alloy Ingot NbHf10-1. Rare Metals and Cemented Carbides(3), 44-45.
IEEE [1] YANG Xiao-wei, WANG Fei, LI Gao-lin, and WU Yu, "Study on Extrusion Process of the Aerospace Alloy Ingot NbHf10-1," Rare Metals and Cemented Carbides, no. 3, pp. 44-45, 2015. keywords: {NbHf10-1 alloy;extrusion process;extrusion ratio;extrusion temperature;finished product ratio}