Mechanical Alloying of Ti-Cr Alloy Powder AITranslate
Abstract AITranslate
The mechanical alloying of both Ti-20%Cr and Ti-30% Cr alloys with titanium powder and chromium powder as raw materials is studied.The results show that with the increase of ball-milling time,Ti-Cr powder particle and grain become smaller and smaller,and layer structure is thiner and thiner,and the X-ray diffraction peaks of both titanium and chromium become broader and their intensity diminish.At the same time,it is found that the X-ray diffraction peaks of chromium have a tendency to move toward smaller angle.When ball-milling time reaches 100 hours,the amorphous character of mixing powder is revealed with stable particle size.
KeyWords AITranslate
1Ranganath S A.Review on particulate-reinforced titanium matrix composites[J].J Mater Sci,1997,32(1):1.
2王文生,阎蕴琪,李中奎.纤维增强TiAl基复合材料的研究[J].钛工业进展,2003(2):5-8. 被引量：48
3赵永庆,赵香苗,朱康英,罗国珍,周廉.阻燃钛合金[J].稀有金属材料与工程,1996,25(5):1-6. 被引量：43
4Hunt M.MMCs for exotic needs[J].Compos,Mater Sci,1989,104(4):53.
5王景唐,沈同德.机械合金化研究与进展[J].物理,1993,22(8):456-460. 被引量：17
6Nagumo M.Reaction milling of metals with hydrocarbon or ceramics[J].Mater Trans TIM,1995,36(2):170.
7吴年强,李志章.机械合金化的机制[J].材料导报,1997,11(6):20-23. 被引量：18
1肖平安,曲选辉,雷长明,秦明礼,祝宝军,高建祥,黄培云.过共析Ti-Cr合金的机械合金化[J].材料科学与工艺,2002,10(3):231-236. 被引量：2
2亓家钟.火花等离子烧结W—Ti—Cr—B的相反应合成[J].粉末冶金技术,2002,20(6):371-371.
3丁满堂.用钛精矿与钛渣冶炼钛铁的研究[J].铁合金,2012,43(1):17-19. 被引量：1
4梁佰战,陈肖虎,冯鹤,唐晓宁,韩涛.高硫铝土矿微波脱硫溶出试验[J].有色金属：冶炼部分,2011(3):23-26. 被引量：18
5王少龙,杨春玉,闫建英,王博一.铅阳极泥湿法脱砷工艺研究[J].贵金属,2012,33(2):36-39. 被引量：7
6张浩闯,张玉勤,蒋业华,周荣.原料粒径与烧结温度对放电等离子烧结Ti-29Nb-13Ta-4.6Zr合金组织和性能的影响[J].粉末冶金材料科学与工程,2014,19(4):589-594. 被引量：2
7郭永锋,丁春华,张洪涛,杨志懋,丁秉钧.高能球磨制备PS304纳米复合粉[J].稀有金属材料与工程,2006,35(12):1995-1998. 被引量：7
8刘沙,刘刚,杨贵彬,黄泽兰.纳米晶掺钇硬质合金粉末的制备[J].中国稀土学报,2003,21(6):677-680. 被引量：2
9黄海广,张玉勤,蒋业华,周荣.放电等离子烧结温度对Ti-29Nb-13Ta-4.6Zr合金显微组织和力学性能的影响[J].稀有金属材料与工程,2013,42(6):1173-1177. 被引量：10
10兰涛.用快速全向成型工艺制备Ti—829和Ti—25Al—10Nb—3V—1Mo[J].钛工业进展,1992(2):30-31. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TF123.71[冶金工程—粉末冶金];TF1[冶金工程—冶金物理化学]
Citation Information:
The mechanical alloying of both Ti-20%Cr and Ti-30% Cr alloys with titanium powder and chromium powder as raw materials is studied.The results show that with the increase of ball-milling time,Ti-Cr powder particle and grain become smaller and smaller,and layer structure is thiner and thiner,and the X-ray diffraction peaks of both titanium and chromium become broader and their intensity diminish.At the same time,it is found that the X-ray diffraction peaks of chromium have a tendency to move toward smaller angle.When ball-milling time reaches 100 hours,the amorphous character of mixing powder is revealed with stable particle size.
quote
| GB/T 7714-2015 | [1] GAO Jian-xiang, QU Xuan-hui, XIAO Ping-an, et al. Mechanical Alloying of Ti-Cr Alloy Powder[J]. Rare Metals and Cemented Carbides, 2002(4): 9-12. |
| MLA | [1] GAO Jian-xiang, et al., "Mechanical Alloying of Ti-Cr Alloy Powder." Rare Metals and Cemented Carbides, no. 4, 2002, pp. 9-12. |
| APA | [1] GAO Jian-xiang, QU Xuan-hui, XIAO Ping-an, & ZHU Bao-jun. (2002). Mechanical Alloying of Ti-Cr Alloy Powder. Rare Metals and Cemented Carbides(4), 9-12. |
| IEEE | [1] GAO Jian-xiang, QU Xuan-hui, XIAO Ping-an, and ZHU Bao-jun, "Mechanical Alloying of Ti-Cr Alloy Powder," Rare Metals and Cemented Carbides, no. 4, pp. 9-12, 2002. keywords: {mechanical alloying;Ti-Cr alloy;ball-milling} |