daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Study of Chemical Reaction and Phase Composition of B_4C and Al under High Temperature AITranslate

School of Materials and Metallurgical of Northeast University;School of Materials and Metallurgical of Northeast University;School of Materials and Metallurgical of Northeast University;School of Materials and Metallurgical of Northeast University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

In this paper,systematic study is made of the high-temperature chemical reaction and phase composition of B4C and Al through XRD and differential thermal analysis.The results showed that at 0~1 500 ℃,reaction between B4C and Al resulted in Al3BC,AlB2,Al4C3 and AlB12C2 in 3 steps as follows:formation of Al3BC,AlB2 at 625~690 ℃;formation of Al4C3 at 1 150~1 185 ℃ and the formation of AlB12C2 at 1 320~1 350 ℃.The phase composition of B4C/Al composites fabricated by pressureless infiltration was analyzed,and th...

KeyWords AITranslate

pressureless infiltration technique B4C/Al composites chemical reaction phase composition mechanical property

1彭可武,吴文远,徐璟玉,涂赣峰.B_4C/Al复合材料力学性能及其断裂机理的研究[J].热加工工艺,2007,36(4):1-3. 被引量:11

2吕臣敬,王芬.金属间化合物/陶瓷复合材料的制备技术[J].陕西科技大学学报:自然科学版,2004,22(1):40-43. 被引量:9

3傅苏黎,丁华东,雷秉强,韩文政,庞茂清.碳化硼基3DMC材料抗弹性能的初步探讨[J].装甲兵工程学院学报,2003(3):17-20. 被引量:16

4李青,华文君,崔岩,张少卿.无压浸渗法制备B_4C/Al复合材料研究[J].材料工程,2003,31(4):17-20. 被引量:34

5佘继红,江东亮,谭寿洪,郭景坤.碳化硅陶瓷的热等静压烧结[J].硅酸盐学报,1997,25(4):395-400. 被引量:28

6唐国宏,张兴华,陈昌麒.碳化硼超硬材料综述[J].材料导报,1994,8(4):69-72. 被引量:42

7J. C VIALA,J BOUIX,G GONZALEZ,C ESNOUF. Chemical reactivity of aluminium with boron carbide[J] 1997,Journal of Materials Science(17):4559~4573

1李刚,简敏,王美玲,王贯春,刘晓珍.反应堆乏燃料贮运用中子吸收材料的研究进展[J].材料导报,2011,25(13):110-113. 被引量:45

2戴春娟,刘希琴,刘子利.高密度B4C/Al中子屏蔽材料的蒙特卡罗模拟[J].核技术,2013,36(3):17-21. 被引量:10

3王涛.B_4C/Al-Mg复合材料的制备及性能研究[J].硅酸盐通报,2016,35(9):2816-2820. 被引量:1

4元琳琳.含硼金属复合材料的研究与应用[J].有色金属与稀土应用,2016,0(3):4-23.

5李盼,邢鹏飞,李欣,王敬强,都兴红,高波,王帅.煅烧温度对用B_4C水选废料制备B_4C材料性能的影响[J].耐火材料,2018,52(3):221-224. 被引量:2

6串禾,吴海峰,谢更新,郑洁,段洋,杜超军,王羲.抛物面碟式太阳能接收器与高温反应器的联合传热特性分析[J].重庆大学学报:自然科学版,2018,41(9):11-18. 被引量:1

7晏朝晖,朱益军,张国峰,庞晓轩,蔡永军,刘炳刚,张鹏程,王伟.B_4C/6061Al复合材料显微组织及力学性能研究[J].科技与创新,2019(1):38-39.

8陈锦,熊宁,葛启录,王铁军,蔡静.粉末冶金法制备铝基碳化硼复合材料的研究进展[J].粉末冶金技术,2019,37(6):461-467. 被引量:3

9李长园,夏晓彬,杨仲田,刘宇辰,张志宏,王建华,蔡军,胡继峰.硼铝复合材料热中子屏蔽性能分析[J].辐射防护,2021,41(1):39-43.

10胡琴,杨越,曹雷刚.高温热处理气氛对B_(4)C/Al复合材料微观组织的影响[J].金属材料与冶金工程,2021,49(4):15-19.

1李永旺,何雪溢,王馨敏,郭振,吴裕,刘海涛.难加工含硼不锈钢热变形行为与机制研究[J].核动力工程,2022,43(S02):67-73.

2简敏,付道贵,王美玲,李刚,王贯春,邹从沛.挤压工艺对B_4C/Al-Si复合材料微观组织的影响[J].核动力工程,2012,33(S2):91-96. 被引量:4

3李刚,王美玲,王贯春,简敏.B_4C/Al中子吸收板腐蚀过程中的起泡研究[J].表面技术,2012,41(4):35-38.

4陈飞达,汤晓斌,王鹏,陈达.新型纤维增强环氧树脂基复合材料研制及其中子屏蔽性能研究[J].原子能科学技术,2012,46(B09):703-707. 被引量:12

5李刚,王美玲.B_4C/Al中子吸收材料的拉伸性能及断口特征[J].热加工工艺,2012,41(22):129-131. 被引量:1

6陈飞达,汤晓斌,王鹏,陈达.基于蒙特卡罗方法的中子屏蔽材料设计[J].强激光与粒子束,2012,24(12):3006-3010. 被引量:15

7戴春娟,刘希琴,刘子利.高密度B4C/Al中子屏蔽材料的蒙特卡罗模拟[J].核技术,2013,36(3):17-21. 被引量:10

8简敏,付道贵,李刚,陈乐,邹从沛.挤压温度对B_4C/Al-Si复合材料组织和性能的影响[J].热加工工艺,2013,42(6):107-110. 被引量:3

9李刚,徐涛忠,付道贵,简敏.B_4C/Al对慢中子衰减性能研究[J].核科学与工程,2013,33(1):10-14. 被引量:4

10简敏,付道贵,王美玲,李刚,邹从沛.碳化硼-铝硅复合材料的热压缩流变应力研究[J].热加工工艺,2013,42(8):111-114.

1刘素琴,黄可龙.水热法合成高岭石中掺杂铁的影响[J].高等学校化学学报,2000,21(2):181-184. 被引量:2

2雷攀,夏长清,周飞,曾凡浩.热处理工艺对B_4C/2519A复合材料相组成及显微组织的影响[J].粉末冶金材料科学与工程,2012,17(3):321-326. 被引量:4

3张友法,余新泉,陈锋,于良.B4C/Al复合材料摩擦磨损特性研究[J].特种铸造及有色合金,2010(10):901-904. 被引量:2

4张星星,余新泉,张友法,于良,陈锋.保温处理对B4C/Al复合材料组织和性能的影响[J].特种铸造及有色合金,2010(3):260-262. 被引量:3

5康巍,李振国,郑子樵,李红英.原位反应法TiB_2/ZA27复合材料的组织及性能研究[J].热加工工艺,2016,45(16):84-88. 被引量:2

6黄东,张明瑜,黄启忠,王丽平,汤贤,杨鑫,童凯.一种新型的SiC-ZrB_2涂层包覆C/C复合材料的制备及烧蚀性能(英文)[J].中国有色金属学报:英文版,2015,25(11):3708-3715. 被引量:2

7徐跃,王维军,董书山,李明辉,扬海滨.线电爆炸法制备的纳米Al粉的X射线衍射线形分析[J].松辽学刊:自然科学版,2002(4):10-12.

8刘玮书,张波萍,李敬锋,刘静.CoSb3的机械合金化合成过程及其放电等离子烧结[J].稀有金属材料与工程,2005(z2):998-1001. 被引量:2

9何建洪,孙勇(指导),段永华,方东升.硼含量对铅镁铝合金组织与力学性能的影响[J].机械工程材料,2012,36(6):60-63.

10郭秀乔,杨延清,张伟,赵光明.涂层法制备SiC_f/γ-TiAl基复合材料的基体微观组织[J].中国体视学与图像分析,2012,17(1):39-42.

Basic Information:

DOI:

Chinese Library Classification Number:TB33[一般工业技术—材料科学与工程]

Citation Information:

In this paper,systematic study is made of the high-temperature chemical reaction and phase composition of B4C and Al through XRD and differential thermal analysis.The results showed that at 0~1 500 ℃,reaction between B4C and Al resulted in Al3BC,AlB2,Al4C3 and AlB12C2 in 3 steps as follows:formation of Al3BC,AlB2 at 625~690 ℃;formation of Al4C3 at 1 150~1 185 ℃ and the formation of AlB12C2 at 1 320~1 350 ℃.The phase composition of B4C/Al composites fabricated by pressureless infiltration was analyzed,and th...

quote

GB/T 7714-2015 [1] PENG Ke-wu, WU Wen-yuan, XU Jing-yu, et al. Study of Chemical Reaction and Phase Composition of B_4C and Al under High Temperature[J]. Rare Metals and Cemented Carbides, 2008(1): 16-19.
MLA [1] PENG Ke-wu, et al., "Study of Chemical Reaction and Phase Composition of B_4C and Al under High Temperature." Rare Metals and Cemented Carbides, no. 1, 2008, pp. 16-19.
APA [1] PENG Ke-wu, WU Wen-yuan, XU Jing-yu, & TU Gan-feng. (2008). Study of Chemical Reaction and Phase Composition of B_4C and Al under High Temperature. Rare Metals and Cemented Carbides(1), 16-19.
IEEE [1] PENG Ke-wu, WU Wen-yuan, XU Jing-yu, and TU Gan-feng, "Study of Chemical Reaction and Phase Composition of B_4C and Al under High Temperature," Rare Metals and Cemented Carbides, no. 1, pp. 16-19, 2008. keywords: {pressureless infiltration technique;B4C/Al composites;chemical reaction;phase composition;mechanical property}