Study of High-temperature Stability of a TiC/Ni-Al Composite Coating Prepared by Laser Deposition AITranslate
Abstract AITranslate
TiC/Ni-Al ceramic particle reinforced high-temperature abrasion-resistant composite coating was prepared by laser synthesis on the stainless steel substrate of 1Cr18Ni9Ti by laser deposition using Ni-Cr-Al-Co-Mo-W-Nb-Ti-C+TiC powder mixture.The sample was kept 50 hours at 1 000 ℃.Microstructures and phase composition and micro-hardness of the coatings before and after high-temperature aging were examined by OM,SEM,EDS and Vicker micro-hardness tester.Under the experimental condition,no cracks,holes or other...
KeyWords AITranslate
1[1]Zhang Dongbo,Gong Shengkai,Xu Huibin,et al.Thermal cycling behaviors of thermal barrier coatings on intermetallic Ni3Al based superalloy[J].Surface and Coatings Technology,2003,168:78-83.
2范映伟,叶洋,侯淑娥,宋尽霞,韩雅芳.C含量对IC6合金微观组织的影响[J].材料工程,2006,34(1):8-11. 被引量：5
3[3]Xiao Chengbo,Han Yafang,Li Shusuo,et al.Effect of Ru on structural stability and mechanical properties of Ni-Al-Mo-B alloy IC6[J].Materials Letters,2003,57:3 843-3 846.
4周笑薇,王小珍.激光熔覆技术在工业中的应用[J].中州大学学报,2005,22(4):110-111. 被引量：17
5刘庆瑔.Ni_3Al基IC6高温合金工程应用研究[J].航空材料学报,2003,23(z1):209-214. 被引量：10
6何宜柱,李明喜,孙国雄.Ni基合金表面激光熔覆CoCrAlY合金的组织与性能[J].焊接技术,2002,31(6):13-15. 被引量：5
7[7]Buta Singh Sidhu,Puri D,Prakash S.Characterisations of plasma s prayed and laser remelted NiCrAlY bond coats and Ni3Al coatings on boiler tube steels[J].Materials Science and Engineering,2004,A368:139-158.
8[8]Chen Y,Wang H M.Microstructure of laser clad TiC/NiAl-Ni3(Al,Ti,C) wear-resistant intermetallic matrix composite coatings[J].Materials Letters,2003,57:2 029-2 036.
9徐颖,徐东,吴建生,王家敏,张澜庭.TiC颗粒增强Ni_3Al基复合材料的组织和性能研究[J].宇航材料工艺,1996,26(4):30-32. 被引量：6
1袁庆龙,冯旭东,曹晶晶,苏志俊.激光熔覆技术研究进展[J].材料导报,2010,24(3):112-116. 被引量：101
2汤晓丹,姚建华,孔凡志,张群莉.激光熔覆H13-TiC梯度复合涂层的制备与组织性能[J].激光技术,2010,34(3):326-330. 被引量：9
3王彦芳,栗荔,鲁青龙,丁伟涛,石志强.不锈钢表面激光熔覆铁基非晶涂层研究[J].中国激光,2011,38(6):177-180. 被引量：35
4王红星,毛向阳,沈彤,张月.纳米TiC颗粒对Ni-TiC复合镀层组织与性能的影响[J].材料工程,2017,45(1):52-57. 被引量：9
5郑旭,徐文静.拖拉机发动机缸体修复技术研究——基于激光熔覆技术[J].农机化研究,2018,40(8):258-262. 被引量：3
6华小虎,柯玉龙,李强.激光熔覆制备云母/LY12涂层的金相显微分析[J].科技经济导刊,2017(24):90-90.
1童亮,顾炜.激光熔覆涂层磨损试验分析研究[J].中国水运：下半月,2020(11):68-69.
2梁志刚,战金明,师文庆,谢玉萍,黄江,安芬菊.硅粉添加量对铁基合金激光熔覆涂层的影响[J].应用激光,2020(4):593-597. 被引量：1
3李海洋,宋建丽,唐彬,石晓蕾,邱焕霞,邓琦林.H13钢表面激光熔覆Stellite6合金的温度场数值模拟[J].应用激光,2020(4):571-578. 被引量：12
4冯旭东,袁庆龙.镍基合金激光熔覆层组织特征研究[J].激光杂志,2011,32(1):51-52. 被引量：1
5程虎,方志刚,戴晟,赵先锐.激光熔覆涂层的研究进展[J].材料保护,2011,44(5):49-52. 被引量：9
6冯树强,李宝玲,李春青.激光熔覆Co基高温合金涂层的显微组织与耐磨性能研究[J].应用激光,2011,31(6):447-450. 被引量：5
7刘博,韩亚苓,朴新欣,肖久寒,王振.预渗入法衬瓷工艺参数研究[J].现代技术陶瓷,2011,32(4):3-7.
8刘敏,樊自拴.电弧喷涂制备Fe_(65)Cr_(20)Mo_7B_(3.5)SiMn_(1.5)W_3涂层[J].中国表面工程,2012,25(1):60-64. 被引量：1
9王东生,田宗军,段宗银,王泾文,沈理达,黄因慧.压片预置式激光多层熔覆厚纳米陶瓷涂层结合性能[J].中国激光,2012,39(2):66-71. 被引量：11
10颜胜科,揭晓华,张艳梅,卢国辉.Co-Cr合金激光熔覆的组织与性能研究[J].热加工工艺,2012,41(8):162-164. 被引量：4
1郝建军,马跃进,李建昌,赵建国,申玉增.氩弧熔覆原位合成Ni基耐磨层在犁铧上的应用[J].农业工程学报,2006,22(12):117-120. 被引量：16
2李嘉宁,巩水利,单飞虎,邓云华.航空钛合金表面激光熔覆Ti_3Al基复合涂层的组织性能分析[J].航空制造技术,2013,0(16):76-80. 被引量：6
3吴玉萍,,林萍华,,王泽华,.等离子熔覆原位合成TiC陶瓷颗粒增强复合涂层的组织与性能[J].中国有色金属学报,2004,14(8):1335-1339. 被引量：39
4赫庆坤,王勇,赵卫民,程义远.激光合成TiC/Ni涂层裂纹控制技术[J].焊接学报,2009,30(4):21-24. 被引量：6
5欧阳洁,赵海云,渠通洋,吴朝骞.激光合成TiC/Ni-Al复合材料涂层组织及耐磨性研究[J].材料保护,2007,40(10):5-8. 被引量：3
6洪增起,申春杰.浅谈高速钢钢锭的锻前加热[J].河北冶金,1999(2):34-35. 被引量：2
7张维平,刘中华,赵玉兰.钛合金表面激光熔覆Ni-Ti-Cr-C复合涂层组织结构研究[J].激光杂志,2008,29(4):57-58. 被引量：2
8孟君晟,史晓萍,王振廷,王永东,胡海亭.ZL104合金氩弧熔敷原位合成TiCp/Al基复合涂层组织及耐磨性[J].材料热处理学报,2011,32(10):141-145. 被引量：4
9李嘉宁,巩水利,代建辉,李怀学,锁红波,蒋帅,丁立,李大成.激光熔覆Fe_3Al基复合涂层对纯Ti的表面强化(英文)[J].稀有金属材料与工程,2013,42(S2):231-234.
10蔡惠民.高温保温期间富硅相的变化[J].特种铸造及有色合金,1995,15(5):9-12.
Basic Information:
DOI：
Chinese Library Classification Number:TG174.4[金属学及工艺—金属表面处理]
Citation Information:
TiC/Ni-Al ceramic particle reinforced high-temperature abrasion-resistant composite coating was prepared by laser synthesis on the stainless steel substrate of 1Cr18Ni9Ti by laser deposition using Ni-Cr-Al-Co-Mo-W-Nb-Ti-C+TiC powder mixture.The sample was kept 50 hours at 1 000 ℃.Microstructures and phase composition and micro-hardness of the coatings before and after high-temperature aging were examined by OM,SEM,EDS and Vicker micro-hardness tester.Under the experimental condition,no cracks,holes or other...
quote
| GB/T 7714-2015 | [1] QU Tong-yang, ZHAO Hai-yun, OU Yang-jie. Study of High-temperature Stability of a TiC/Ni-Al Composite Coating Prepared by Laser Deposition[J]. Rare Metals and Cemented Carbides, 2008(1): 11-15. |
| MLA | [1] QU Tong-yang, et al., "Study of High-temperature Stability of a TiC/Ni-Al Composite Coating Prepared by Laser Deposition." Rare Metals and Cemented Carbides, no. 1, 2008, pp. 11-15. |
| APA | [1] QU Tong-yang, ZHAO Hai-yun, & OU Yang-jie. (2008). Study of High-temperature Stability of a TiC/Ni-Al Composite Coating Prepared by Laser Deposition. Rare Metals and Cemented Carbides(1), 11-15. |
| IEEE | [1] QU Tong-yang, ZHAO Hai-yun, and OU Yang-jie, "Study of High-temperature Stability of a TiC/Ni-Al Composite Coating Prepared by Laser Deposition," Rare Metals and Cemented Carbides, no. 1, pp. 11-15, 2008. keywords: {laser deposition;Ni-Al based;TiC ceramic particle;composite materials coating;high-temperature stability} |