Study on Production Process of Metallurgic-grade High-purity Tantalum Powder AITranslate
Abstract AITranslate
During production of tantalum powder by sodium reduction of potassium tantalum fluoride,power consumption is reduced by adjusting heat preservation time for sodium reduction with agitation to reduce the energy consumption and cost.After the activation temperature of potassium tantalum fluoride is adjusted and the activation time is extended,the activating effect is improved and the metal impurity content is less than 10×10-6 in the metallurgical-grade tantalum powder from continuous production while the national standard is 30×10-6.Therefore,the produced tantalum powder reaches high-purity grade.
KeyWords AITranslate
1韩建设,赵明智,周勇.氟钽酸钾生产工艺及装备的进展[J].稀有金属与硬质合金,2004,32(3):44-48. 被引量：10
2柴立元,钟海云.氟钽酸钾钠还原生产钽粉的工艺现状及展望[J].稀有金属与硬质合金,1994,22(4):30-33. 被引量：4
3包玺芳,马跃忠,王治道,李仲香.金属钽粉湿法提纯的水洗和酸洗方法研究[J].宁夏工程技术,2012,11(1):46-48. 被引量：7
1王强,黄云红,牟东,陈飞.碳还原法生产冶金级钽粉的工艺研究[J].冶金管理,2019,0(17):35-36.
2李丽君,雒国清,刘建伟,纪保军.降低钠还原钽粉中铁、镍质量分数的工艺探讨[J].宁夏工程技术,2020,19(3):223-225. 被引量：1
3邹林燕,管国辉.酸洗液氢氟酸浓度及温度对钽粉除杂效果的影响[J].世界有色金属,2022(17):157-159.
1许志林,杜显锋,杨晓丽,梁仲帅,熊礼龙.钽电解电容器用钽阳极制备技术的研究进展[J].电子元件与材料,2023,42(8):907-921.
1王辉.株冶镉生产工艺的改进[J].有色冶炼,1996,25(4):37-41. 被引量：2
2胡华业,刘志强.高纯钽(铌)氯化物制备技术的研究[J].稀有金属与硬质合金,2008,36(1):24-25.
3孟斌.高纯钽的制取工艺[J].有色与稀有金属国外动态,1994(13):6-7.
4徐令斌.废钽的高效回收工艺研究[J].稀有金属与硬质合金,1998,26(4):31-35. 被引量：3
5段治华.电解钴生产工艺改进浅议[J].有色冶炼,1998,27(5):20-22.
6包玺芳,马跃忠,王治道,李仲香.金属钽粉湿法提纯的水洗和酸洗方法研究[J].宁夏工程技术,2012,11(1):46-48. 被引量：7
7三季度全球氧化铝产量数据公布[J].中国金属通报,2011(47):14-14.
8谢兴同,古文全,薛涛,吴健,郭光平.电解锌用铝阴极板生产工艺改进[J].贵州科学,2012,30(1):63-66. 被引量：4
9石家智,李永伟.轻烧镁球的生产工艺改进[J].梅山科技,2009(1):23-25.
10汪洪峰,江中块.提高单中包连浇炉数的生产措施[J].梅山科技,2003(4):1-3.
Basic Information:
DOI：
Chinese Library Classification Number:TF841.6[冶金工程—有色金属冶金]
Citation Information:
During production of tantalum powder by sodium reduction of potassium tantalum fluoride,power consumption is reduced by adjusting heat preservation time for sodium reduction with agitation to reduce the energy consumption and cost.After the activation temperature of potassium tantalum fluoride is adjusted and the activation time is extended,the activating effect is improved and the metal impurity content is less than 10×10-6 in the metallurgical-grade tantalum powder from continuous production while the national standard is 30×10-6.Therefore,the produced tantalum powder reaches high-purity grade.
quote
| GB/T 7714-2015 | [1] YUE Ri-hui, WU Mai-jin. Study on Production Process of Metallurgic-grade High-purity Tantalum Powder[J]. Rare Metals and Cemented Carbides, 2015(6): 16-18. |
| MLA | [1] YUE Ri-hui, and WU Mai-jin. "Study on Production Process of Metallurgic-grade High-purity Tantalum Powder." Rare Metals and Cemented Carbides, no. 6, 2015, pp. 16-18. |
| APA | [1] YUE Ri-hui, & WU Mai-jin. (2015). Study on Production Process of Metallurgic-grade High-purity Tantalum Powder. Rare Metals and Cemented Carbides(6), 16-18. |
| IEEE | [1] YUE Ri-hui and WU Mai-jin, "Study on Production Process of Metallurgic-grade High-purity Tantalum Powder," Rare Metals and Cemented Carbides, no. 6, pp. 16-18, 2015. keywords: {high-purity tantalum powder;improvement of production process;potassium tantalum fluoride;sodium reduction;energy saving} |