daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Research on the Hydrogen Reduction of Ultra-fine W-Powders AITranslate

School of Materials Science and Engineering, Jiangsu University;School of Materials Science and Engineering, Jiangsu University;School of Materials Science and Engineering, Jiangsu University;School of Materials Science and Engineering, Jiangsu University;School of Materials Science and Engineering, Jiangsu University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Ultra-fine tungsten powder is prepared by hydrogen reduction from blue tungsten oxide.Research is made on the effect of temperature,boat charge and hydrogen flowrate on granularity of W-powder.The results showed that reduction temperature is critical for the preparation of ultra-fine W-powder from blue tungsten oxide under appropriate technological conditions.

KeyWords AITranslate

blue tungsten oxide hydrogen reduction ultra-fine W powder

1钟海云,李荐,柴立元.从锂离子二次电池正极废料——铝钴膜中回收钴的工艺研究[J].稀有金属与硬质合金,2001,29(1):1-4. 被引量:66

2廖寄乔,唐美英.氧化钨相成分对超细钨粉均匀性的影响[J].稀有金属材料与工程,2001,30(6):453-456. 被引量:23

3赵海锋,朱丽慧,马学鸣.纳米WC硬质合金制备新工艺[J].材料科学与工程,2003,21(1):130-133. 被引量:33

4张凤林,朱敏,王成勇.纳米硬质合金进展[J].稀有金属,2002,26(1):54-58. 被引量:30

5阳冬元.蓝钨在回转还原炉中的氢还原[J].硬质合金,2003,20(1):16-19. 被引量:11

6Mindy N, et al. Nano structure material: summarization and commercial analysis[J]. International Journal of Powder Metallurgy, 1998, 34(6) :33.

7Schubert W S, et al. General aspects and limits of conventional ultrafine WC powder manufacture and hard metal production[J]. Int J of Refract Metals & Hard Materials, 1995,13:28.

8Zeiler B.The potention of conventional tungsten carbide powder rnanufacturing[A]. Knerting G Wilhartitz. Proceeding of the 14^th Plansee - Seminar[C]. Reutte.Plansee A G, 1997.265.

9Bock A, et al. Grain/partlcle growh of ultrafine WC during W- powder carburization[A] .Proceedings of the 14^th Plansee -Seminar[ C], Reutte:Plansee A G, 1997.437.

10陶正已.近十年来钨粉和碳化钨粉的研究和开发[J].硬质合金,1992,9(2):65-75. 被引量:16

1游峰,范景莲,田家敏,成会朝.喷雾干燥和一步氢还原制备超细钨粉工艺的研究[J].中国钨业,2008,23(6):15-18. 被引量:9

2刘辉明,范景莲,田家敏,游峰.超细钨粉的研究与应用[J].中国钨业,2009,24(1):29-32. 被引量:16

3王岗,李海华,黄忠伟,陈美华,王庆康,钟伟良.蓝钨与紫钨氢还原法生产超细钨粉的比较[J].稀有金属材料与工程,2009,38(A01):548-552. 被引量:17

4宋翰林,姜平国,刘文杰,汪正兵.氧化钨氢还原动力学的研究进展[J].有色金属科学与工程,2017,8(5):64-69. 被引量:6

5陈升.低温离解高温自还原制备细颗粒蓝色氧化钨[J].中国钨业,2019,34(4):62-65. 被引量:3

1陈强,冯鹏发,武洲,胡林.热等离子法制备高致密球形钼粉颗粒[J].中国粉体技术,2013,19(1):42-44. 被引量:3

2游峰,范景莲,田家敏,刘涛.不规则形貌钨粉的形成机理[J].中国钨业,2010,25(1):34-37. 被引量:5

3张彩霞,周阳.高性能超细钨粉的制备工艺研究[J].上海有色金属,2010,31(4):189-193. 被引量:2

4廖春发,杨文强,王旭,谢泉文,肖志华.由钨酸盐熔盐电解直接制备钨粉的可行性分析[J].有色金属科学与工程,2011,2(4):4-6. 被引量:5

5刘晓平,陈进.感应等离子工艺参数对制备纳米球形钨粉的影响[J].热加工工艺,2011,40(20):170-172. 被引量:4

6刘原,唐建成,雷纯鹏,叶楠,卓海鸥.氧化钨还原过程及机理研究[J].粉末冶金工业,2012,22(4):26-29. 被引量:8

7陈强,冯鹏发,武洲,胡林.热等离子法制取高致密球形钼粉工艺探讨[J].中国科技博览,2012(36):638-639.

8黄化,秦明礼,曲选辉,李睿.气流磨处理钨粉的研究[J].稀有金属材料与工程,2012,41(12):2210-2214. 被引量:7

9崔云涛,王金淑,刘伟.亚微米级压制型钪钨阴极粉末的研究[J].北京工业大学学报,2013,39(9):1420-1424.

10陈强,冯鹏发,武洲,胡林.高致密球形钼粉制备工艺研究[J].中国钼业,2013,37(4):38-41. 被引量:1

1陈青林.还原工艺对钴粉粒度的影响[J].稀有金属与硬质合金,2001,29(4):21-24. 被引量:15

2李渝.钨粉末冶金产品的生产和应用[J].钨钼材料,1989(2):24-28.

3蔡万玲,张玉英.由白钨酸氢还原制取超细钨粉的工艺研究[J].中国钨业,2010,25(3):27-29.

4М.,СМ.钨粉末坯条冷压过程的实验研究[J].钨钼材料,1992(2):78-82.

5殷为宏,郑汉,张德尧.钨和钨合金的新发展(Ⅰ)——钨粉末和掺杂钨丝[J].稀有金属材料与工程,1990(2):2-10. 被引量:5

6谢中华,张秋和,王文华,陈树茂.钨粉制备工艺对压坯强度影响的研究[J].中国钨业,2010,25(6):28-30. 被引量:9

7廖寄乔,唐美英.氧化钨相成分对超细钨粉均匀性的影响[J].稀有金属材料与工程,2001,30(6):453-456. 被引量:23

8王岗,李海华,黄忠伟,陈美华,王庆康,钟伟良.蓝钨与紫钨氢还原法生产超细钨粉的比较[J].稀有金属材料与工程,2009,38(A01):548-552. 被引量:17

9吴晓东,柴永新,傅小明,傅明喜,戴起勋.蓝钨制取超细钨粉的研究[J].稀有金属,2005,29(4):570-573. 被引量:12

10罗嗣政,黄国柱,赵建国,项兢.改善粉末冶金电触头粉末混合料流动性的方法探索[J].上海有色金属,2003,24(2):71-73. 被引量:2

Basic Information:

DOI:

Chinese Library Classification Number:TF123.72[冶金工程—粉末冶金]

Citation Information:

Ultra-fine tungsten powder is prepared by hydrogen reduction from blue tungsten oxide.Research is made on the effect of temperature,boat charge and hydrogen flowrate on granularity of W-powder.The results showed that reduction temperature is critical for the preparation of ultra-fine W-powder from blue tungsten oxide under appropriate technological conditions.

quote

GB/T 7714-2015 [1] WU Xiao-dong, FU Xiao-ming, CHAI Yong-xin, et al. Research on the Hydrogen Reduction of Ultra-fine W-Powders[J]. Rare Metals and Cemented Carbides, 2005(1): 14-17.
MLA [1] WU Xiao-dong, et al., "Research on the Hydrogen Reduction of Ultra-fine W-Powders." Rare Metals and Cemented Carbides, no. 1, 2005, pp. 14-17.
APA [1] WU Xiao-dong, FU Xiao-ming, CHAI Yong-xin, FU Ming-xi, & DAI Qi-xun. (2005). Research on the Hydrogen Reduction of Ultra-fine W-Powders. Rare Metals and Cemented Carbides(1), 14-17.
IEEE [1] WU Xiao-dong, FU Xiao-ming, CHAI Yong-xin, FU Ming-xi, and DAI Qi-xun, "Research on the Hydrogen Reduction of Ultra-fine W-Powders," Rare Metals and Cemented Carbides, no. 1, pp. 14-17, 2005. keywords: {blue tungsten oxide;hydrogen reduction;ultra-fine W powder}