Study of Grain Growth of Nanocrystalline WC/Co Powder in theEarly Stage of Sintering AITranslate
Abstract AITranslate
Study is made of the grain growth of tungsten carbide (WC)in the early stage of sintering TEM and XRD analysis is made of the change of grain during sintering,based on which the mechanisms of grain growth are discussed. Results showed that grain growth occurred during heating at 1 000 ℃ with some grains grown up to 100 nm at 1 100℃.At 1 200℃,even more dramatic grain growth occurred with some grains up to 400 nm.The shape of WC grains become regular during sintering.And WC grains are grown up based on the grain rotation combination mechanism and local liquid-phase sintering in the early stages of sintering.
KeyWords AITranslate
1Agrawal D.Grain growth control in microwave sintering of ultrafine WC-Co composite powder compacts[J].Powder Metallurgy,2000,43(1):15.
2Zhu L H,et al.Preparation of nanocrystalline WC-10Co-0.8 VC by spark plasma simtering[J].Journal of Materials Science Letters,2003,22(22);1631.
3Azcona A.Hot isostatic Pressing of nanosized WC-Co hardmetals[A].Proceedings of the 15th International Plansee Seminar[C].Routte:plansee Holding A G,2001,35.
4Zhigang F,et al.Study of nanostructured WC-Co composites[J].Int J Refractory Metals & Hard Materials,1995,13(5):297.
5Schubert W D,et al.General aspects and limits of conventional ultrafine WC powder manufacture and hard metal production[J].Int J Refractory Metals & Hard Materials,1995,13(5):281.
6Schubert W D.On the formation of very large WC crystals during sintering of ultrafine WC-Co alloy[C].Annapolis MD USA:2000 Int Conf on Tungsten,Hard Metal,and Refractory Alloys,2000.
7Arato P.Solid or liquid phase sintering of nanocrystalline WC-Co hardmetals[J].Nanostructured Materials,1998,10(2):245.
8刘兵海,张跃,欧阳世翕.超细晶粒WC-Co硬质合金的收缩与晶粒长大[J].华东理工大学学报：自然科学版,1999,25(5):494-498. 被引量：8
1孙兰,贾成厂,曹瑞军,刘总.WC-Co硬质合金烧结过程中的晶粒长大现象研究[J].稀有金属与硬质合金,2007,35(1):44-47. 被引量：15
2阳浩,蒋显全,李纯迟.VC和Cr_3C_2抑制剂的应用和图解优化设计[J].硬质合金,2007,24(3):188-191. 被引量：5
3刘雪梅,宋晓艳,刘文彬,赵世贤,张久兴,殷福星.热压和放电等离子烧结对硬质合金材料微观组织和性能的影响[J].电子显微学报,2009,28(1):1-5. 被引量：3
4孙东平.晶粒长大抑制剂对WC-8%Co超细硬质合金性能的影响[J].稀有金属与硬质合金,2009,37(2):7-11. 被引量：7
5张春华,郭亨群,王国立,宋志华,吴冲浒,吴其山.纳米碳化钨粉的制备和晶粒粗化动力学研究[J].材料导报：纳米与新材料专辑,2009,23(2):129-131.
6廖立,谢克难,汪玉洁,龙沁,赖雪飞,张星和.新型核壳结构纳米复合粉的制备[J].四川化工,2010,13(1):4-5. 被引量：1
7赵志伟,郑红娟,刘颖,邹文俊,左宏森,关春龙.放电等离子烧结制备超细WC基硬质合金[J].材料热处理学报,2010,31(8):40-45. 被引量：9
8张小飞,果世驹,杨霞,张小兵.烧结曲线(MSC)在200nm WC-Co硬质合金晶粒长大模拟中的应用[J].稀有金属,2011,35(3):373-377. 被引量：2
9李艳,林晨光,曹瑞军.超细晶WC-Co硬质合金用纳米钴粉的研究现状与展望[J].稀有金属,2011,35(3):451-457. 被引量：12
10饶承毅.不同烧结温度下超细合金烧结体的密度、钴磁和晶粒度[J].硬质合金,2011,28(3):143-147. 被引量：4
1刘雪梅,宋晓艳,刘文彬,赵世贤,张久兴,殷福星.热压和放电等离子烧结对硬质合金材料微观组织和性能的影响[J].电子显微学报,2009,28(1):1-5. 被引量：3
2迟静,李惠琪,王淑峰,李敏.矿用WC硬质合金的研究进展与趋势[J].矿山机械,2010,38(8):23-28. 被引量：7
3雷贻文,吴恩熙.VC/Cr_3C_2添加剂与烧结温度对超细WC-12Co硬质合金的影响[J].材料科学与工艺,2010,18(3):405-409. 被引量：7
4曹瑞军,林晨光.Cr_3C_2粉体的高能球磨细化[J].硬质合金,2010,27(4):206-208. 被引量：2
5姜爱民,蒋显全,陈巧旺,陈异.晶粒长大抑制剂在硬质合金中的应用概况[J].硬质合金,2010,27(4):252-257. 被引量：13
6袁明健,顾金宝.氢气脱蜡工艺与原料WC碳量的选择[J].硬质合金,2010,27(5):293-297. 被引量：2
7罗骥,方哲成,郭志猛,邵慧萍.含V和Cr纳米W粉碳化热力学分析及实验[J].材料热处理学报,2011,32(2):26-29.
8王弢,柯亚仕,周丹.硬质合金孔加工刀具的技术进展[J].工具技术,2011,45(5):9-12. 被引量：9
9詹斌,刘宁.Cr_3C_2对纳米TiN改性Ti(C,N)基金属陶瓷组织和性能的影响[J].热处理,2011,26(3):39-44. 被引量：1
10饶承毅.不同烧结温度下超细合金烧结体的密度、钴磁和晶粒度[J].硬质合金,2011,28(3):143-147. 被引量：4
1张德尧.烧结技术有望用于超细WC/Co[J].稀有金属快报,2000,19(9):15-16.
2Moon.,IH,钟培全.镍增强钨丝的晶粒长大机制[J].钨钼材料,1994(3):53-60.
3KazukiOkada,陈满元.碳化钒添加剂对硬质合金烧结的影响[J].国外难熔金属与硬质材料,2000,16(2):34-40. 被引量：7
4佘振辉.硬质合金烧结技术的发展[J].硬质合金,1998,15(1):49-53. 被引量：16
5张玉华,张纪生.纳米级WC—Co硬质合金[J].稀有金属材料与工程,1995,24(2):18-21. 被引量：10
6Porat,R,文开建.纳米晶体粉末硬质合金烧结机理的研究[J].国外难熔金属与硬质材料,1997,13(1):1-5. 被引量：7
7张磊,焦万丽,蔚海军,姚广春.富铁相杂质形态对电磁净化铝熔体效果的影响[J].特种铸造及有色合金,2005,25(3):131-132. 被引量：4
8郭垚峰,范景莲,刘涛.W-30Cu纳米复合粉末液相烧结致密化与晶粒长大机制[J].稀有金属材料与工程,2014,43(1):125-129. 被引量：3
9王思清,魏光明,李淑霞.稀土元素La对钼还原及制坯的影响[J].中国钼业,1997,21(2):99-101. 被引量：16
10史晓亮,王学广,邵刚勤,段兴龙,袁润章.纳米晶WC-Co硬质合金的烧结[J].材料导报,2004,18(F04):29-32. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TF124.5[冶金工程—粉末冶金]
Citation Information:
Study is made of the grain growth of tungsten carbide (WC)in the early stage of sintering TEM and XRD analysis is made of the change of grain during sintering,based on which the mechanisms of grain growth are discussed. Results showed that grain growth occurred during heating at 1 000 ℃ with some grains grown up to 100 nm at 1 100℃.At 1 200℃,even more dramatic grain growth occurred with some grains up to 400 nm.The shape of WC grains become regular during sintering.And WC grains are grown up based on the grain rotation combination mechanism and local liquid-phase sintering in the early stages of sintering.
quote
| GB/T 7714-2015 | [1] WANG Hong-tao, WANG Xu, YU Yong-ning. Study of Grain Growth of Nanocrystalline WC/Co Powder in theEarly Stage of Sintering[J]. Rare Metals and Cemented Carbides, 2005(1): 18-21. |
| MLA | [1] WANG Hong-tao, et al., "Study of Grain Growth of Nanocrystalline WC/Co Powder in theEarly Stage of Sintering." Rare Metals and Cemented Carbides, no. 1, 2005, pp. 18-21. |
| APA | [1] WANG Hong-tao, WANG Xu, & YU Yong-ning. (2005). Study of Grain Growth of Nanocrystalline WC/Co Powder in theEarly Stage of Sintering. Rare Metals and Cemented Carbides(1), 18-21. |
| IEEE | [1] WANG Hong-tao, WANG Xu, and YU Yong-ning, "Study of Grain Growth of Nanocrystalline WC/Co Powder in theEarly Stage of Sintering," Rare Metals and Cemented Carbides, no. 1, pp. 18-21, 2005. keywords: {nanocrystalline WC/Co cemented carbide;graingrowth;sintering} |