Study on the Preparation Process of RE-doped Mo Powder by Hydrothermal Synthesis AITranslate
Abstract AITranslate
Precursor solution was prepared through ultrasonic vibrating and setting,and then ulltra-fine RE-doped MoO3 powder was prepared by hydrothermal synthesis through the modification of the solution pH value, synthesis temperature and filling rate. Finally, nanometer-sized RE-doped Mo powder was produced after two-stage hydrogen reduction. MoO3 powder was characterized by XRD and SEM. The results show that nanometer-sized RE-doped Mo powder synthesized under the conditions of pH=0.5,180℃ synthesis temperature and 90% filling rate has fine and uniform particle size and good dispersibility.
KeyWords AITranslate
1张启修,赵秦生.钨钼冶舍[M].北京:冶金工业出版社,2005.
2彭金剑,崔千红.生产工艺对钼粉平均粒径及其加工性能的影响[J].中国钼业,1997,21(1):35-36. 被引量：8
3李竟先,吴基球,鄢程.纳米颗粒的水热法制备[J].中国陶瓷,2002,38(5):36-39. 被引量：20
1朱栋,李金凯,段广彬,刘宗明.Ba-Gd(Y)-O三元体系荧光材料制备研究进展[J].济南大学学报：自然科学版,2019,33(1):1-7.
1李渝.掺杂Mo的低温断裂特性及He退火脆性[J].钨钼材料,1990(4):39-42.
2郭松亮,张国赏,魏世忠,徐流杰,崔超鹏.ZrO_2掺杂Mo基合金的制备及强化机理分析[J].稀有金属与硬质合金,2014,42(5):48-50. 被引量：1
3郜雅楠,沈德久.超声波对铝合金微弧氧化陶瓷层的影响[J].热处理技术与装备,2015,36(5):37-40.
4Z.C.Wang.添加元素对（NdPr）-Fe-B非晶薄带晶化行为、结构和磁性的影响[J].现代冶金（内蒙古）,2004(1):59-62.
5黄立业,憨勇,徐可为.电结晶法制备羟基磷灰石生物涂层的研究[J].材料科学与工程,1997,15(3):55-57. 被引量：2
6段素红,张国赏,魏世忠,彭光辉,徐流杰,侯书增.液-液掺杂Mo-La_2O_3板材的室温力学性能[J].稀有金属与硬质合金,2011,39(2):29-32. 被引量：2
7魏强,王硕.第三组元Cr,Mo,W掺杂对钛铝化合物脆性的影响[J].金属功能材料,2014,21(2):26-31. 被引量：2
8周红霞,王亮,彭飞,王铀.纳米稀土对热喷涂WC-12Co涂层的改性作用[J].材料热处理学报,2009,30(2):162-166. 被引量：8
9张晓峰,张英才,宫茂武.阳极泥法提取钢中大型非金属夹杂及其大小种类测定[J].山东冶金,2001,23(2):58-60. 被引量：1
10彭飞,王政,金宝士,刘娟,王铀.矿用纳米稀土硬质合金的磨损性能研究[J].热处理,2010,25(4):39-43. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TG146.412[金属学及工艺—金属材料]
Citation Information:
Precursor solution was prepared through ultrasonic vibrating and setting,and then ulltra-fine RE-doped MoO3 powder was prepared by hydrothermal synthesis through the modification of the solution pH value, synthesis temperature and filling rate. Finally, nanometer-sized RE-doped Mo powder was produced after two-stage hydrogen reduction. MoO3 powder was characterized by XRD and SEM. The results show that nanometer-sized RE-doped Mo powder synthesized under the conditions of pH=0.5,180℃ synthesis temperature and 90% filling rate has fine and uniform particle size and good dispersibility.
quote
| GB/T 7714-2015 | [1] MA Yan-hua, LI Ji-wen, WEI Shi-zhong, et al. Study on the Preparation Process of RE-doped Mo Powder by Hydrothermal Synthesis[J]. Rare Metals and Cemented Carbides, 2013(5): 15-18. |
| MLA | [1] MA Yan-hua, et al., "Study on the Preparation Process of RE-doped Mo Powder by Hydrothermal Synthesis." Rare Metals and Cemented Carbides, no. 5, 2013, pp. 15-18. |
| APA | [1] MA Yan-hua, LI Ji-wen, WEI Shi-zhong, XU Liu-jie, GONG Fang-fang, & ZHAO Jing-jing. (2013). Study on the Preparation Process of RE-doped Mo Powder by Hydrothermal Synthesis. Rare Metals and Cemented Carbides(5), 15-18. |
| IEEE | [1] MA Yan-hua, LI Ji-wen, WEI Shi-zhong, XU Liu-jie, GONG Fang-fang, and ZHAO Jing-jing, "Study on the Preparation Process of RE-doped Mo Powder by Hydrothermal Synthesis," Rare Metals and Cemented Carbides, no. 5, pp. 15-18, 2013. keywords: {ultrasonic vibrating and setting;hydrothermal synthesis;hydrogen reduction;RE-doped molybdenum powder;nano-powder} |