Effects of Plasma Mo Penetration on the Wear Resistance and Tensile Property of the Alloy TC4 AITranslate
Abstract AITranslate
The wear resistance and tensile property of TC4 was studied after its surface was treated with plasma Mo penetration. SEM, EDS and SMM were used to analyze the microstructure, composition and fracture morphology of the layer modified by Mo penetration, and then its wear mechanism and tensile property were discussed. The results show that when treated with plasma Mo penetration,the TC4 surface has better wear resistance with higher hardness, and its tensile strength is only slightly lower than the original substrate. Therefore, the wear resistance of the alloy can be improved through plasma Mo penetration without change of mechanical property of the substrate.
KeyWords AITranslate
1何利舰,张小农.钛及钛合金的表面处理技术新进展[J].上海金属,2005,27(3):39-45. 被引量：54
2信世堡.钛合金表面处理技术的新进展(上)[J].表面工程资讯,2009,9(2):3-5. 被引量：4
3姜海涛,邵忠财,魏守强.钛合金表面处理技术的研究进展[J].电镀与精饰,2010,32(10):15-20. 被引量：25
4刘凤岭,李金桂,冯自修.钛合金表面技术的进展[J].腐蚀与防护,2001,22(2):54-57. 被引量：58
1吴中庆,杨雪梅,梁文萍.Ti6Al4V表面等离子Mo-N共渗耐磨性能研究[J].能源与节能,2013(6):106-109.
2尹忠奇,田晓东,蔡丽敏,王利捷.TC4合金表面辉光离子Mo-B共渗的研究[J].热加工工艺,2013,42(18):106-108.
3贲能军,严国军,顾琪,梁文萍.TC4合金表面等离子渗Mo层制备及其高温摩擦磨损性能[J].热加工工艺,2013,42(22):125-128. 被引量：2
4贲能军,王宜君,王其松,梁文萍.Ti6Al4V合金表面等离子渗Mo及其力学性能研究[J].热加工工艺,2014,43(2):135-138. 被引量：2
5孔凡友,易宏,马华,秦林.梯度结构对Mo改性层接触应力的影响[J].热加工工艺,2018,47(18):121-124.
1陆小会,高原,王成磊,韦文竹,张光耀.不锈钢等离子渗铪并固体渗碳后的高温摩擦性能[J].表面技术,2015,44(8):38-43.
2潘晓扬,梁文萍,缪强,任蓓蕾,刘文.不同温度下TC21钛合金等离子表面渗Cr层的摩擦磨损性能[J].南京航空航天大学学报,2016,48(1):35-41. 被引量：3
3杨海龙,郑宇,王远.Ti6Al4V表面仿鲨鱼皮形貌的生物摩擦学特性[J].热加工工艺,2016,45(16):119-122. 被引量：6
4王存喜,梁国栋,田兴达,李涌泉.TiAlNb9合金表面B-Y改性硅化物渗层的组织及热冲击性能[J].金属热处理,2023,48(6):142-146.
1贲能军,王元生,朱璟,梁文萍.TC4等离子渗Mo不同摩擦副条件下耐磨性能研究[J].热加工工艺,2013,42(20):153-156. 被引量：2
2贲能军,王宜君,王其松,梁文萍.Ti6Al4V合金表面等离子渗Mo及其力学性能研究[J].热加工工艺,2014,43(2):135-138. 被引量：2
3许玮,刘小萍,徐重.等离子渗Mo提高TiAl基合金高温氧化性能的研究[J].新技术新工艺,2009(1):86-87. 被引量：2
4许玮,刘小萍,徐重.等离子渗Mo提高TiAl基合金抗高温氧化性能的研究[J].热加工工艺,2008,37(24):109-110.
5郭凯,梁文萍,贲能军,任蓓蕾,缪强,张平则.等离子渗Mo的TC11钛合金摩擦磨损性能[J].热处理,2011,26(3):21-24. 被引量：3
6贲能军,严国军,顾琪,梁文萍.TC4合金表面等离子渗Mo层制备及其高温摩擦磨损性能[J].热加工工艺,2013,42(22):125-128. 被引量：2
7赵继英,范爱兰,詹科,唐宾.钛合金表面渗Mo改性层在5%NaCl溶液中的抗腐蚀性能研究[J].热加工工艺,2007,36(16):51-52. 被引量：4
8范爱兰,秦妍梅,秦林,常大庆,唐宾.Ti6Al4V合金离子渗Mo组织结构及其腐蚀性能研究[J].中国腐蚀与防护学报,2007,27(1):31-34. 被引量：4
9屠雯.中国贵金属指数发布[J].中国有色金属,2014(16):21-21.
10赵猛,李争显,黄春良,张欣,华云峰,慕伟意.铌合金表面辉光等离子渗Mo的扩散研究[J].稀有金属,2010,34(6):839-843. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TG146.23[金属学及工艺—金属材料]
Citation Information:
The wear resistance and tensile property of TC4 was studied after its surface was treated with plasma Mo penetration. SEM, EDS and SMM were used to analyze the microstructure, composition and fracture morphology of the layer modified by Mo penetration, and then its wear mechanism and tensile property were discussed. The results show that when treated with plasma Mo penetration,the TC4 surface has better wear resistance with higher hardness, and its tensile strength is only slightly lower than the original substrate. Therefore, the wear resistance of the alloy can be improved through plasma Mo penetration without change of mechanical property of the substrate.
quote
| GB/T 7714-2015 | [1] SU Hong-lin, BEN Neng-jun, LIANG Wen-ping, et al. Effects of Plasma Mo Penetration on the Wear Resistance and Tensile Property of the Alloy TC4[J]. Rare Metals and Cemented Carbides, 2012(1): 21-25. |
| MLA | [1] SU Hong-lin, et al., "Effects of Plasma Mo Penetration on the Wear Resistance and Tensile Property of the Alloy TC4." Rare Metals and Cemented Carbides, no. 1, 2012, pp. 21-25. |
| APA | [1] SU Hong-lin, BEN Neng-jun, LIANG Wen-ping, & MOU Qiang. (2012). Effects of Plasma Mo Penetration on the Wear Resistance and Tensile Property of the Alloy TC4. Rare Metals and Cemented Carbides(1), 21-25. |
| IEEE | [1] SU Hong-lin, BEN Neng-jun, LIANG Wen-ping, and MOU Qiang, "Effects of Plasma Mo Penetration on the Wear Resistance and Tensile Property of the Alloy TC4," Rare Metals and Cemented Carbides, no. 1, pp. 21-25, 2012. keywords: {TC4 alloy;double-glow plasma surface metallurgy technology;plasma Mo penetration;wear resistance;tensile property} |