Bio-Based Epoxy Binders from Lignin Derivatized with Epoxidized Rapeseed Fatty Acids in Bimodal Coating Systems AITranslate
Abstract AITranslate
In the recent decade, a strong push toward development of more biobased binders for coating applications as part of the transition toward independence from nonrenewable fossil-based raw materials has been seen. Here we present a biobased epoxy lignin/rapeseed fatty acid derivative (eFA-L), which has been applied in coating systems, leading to coatings with >97% biobased content and Y = 130 MPa. To approach the strength of classical epoxy systems, a series of bimodal systems, containing low molecular weight adducts of biobased diglycidyl furan-2,5-dicarboxylate (DGFDC) and fossil-based diglycidylether bisphenol A (DGEBA) were prepared. In these bimodal systems, it was shown that DGEBA contributes to higher mechanical strength compared to DGFDC at equivalent cross-linking density, which was attributed to increased π–π stacking interactions. The biobased bimodal binder system composed of eFA-L and DGFDC (30 wt %) resulted in a coating with a biobased content of 93 wt %, Y = 440 MPa, and Tg > 50 °C. Better mechanical properties (Y = 700 MPa) were achieved by use of DGEBA (30 wt %), but it results in a significant reduction in biobased content to 62 wt %.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsapm.1c01351
Chinese Library Classification Number:
Citation Information:
In the recent decade, a strong push toward development of more biobased binders for coating applications as part of the transition toward independence from nonrenewable fossil-based raw materials has been seen. Here we present a biobased epoxy lignin/rapeseed fatty acid derivative (eFA-L), which has been applied in coating systems, leading to coatings with >97% biobased content and Y = 130 MPa. To approach the strength of classical epoxy systems, a series of bimodal systems, containing low molecular weight adducts of biobased diglycidyl furan-2,5-dicarboxylate (DGFDC) and fossil-based diglycidylether bisphenol A (DGEBA) were prepared. In these bimodal systems, it was shown that DGEBA contributes to higher mechanical strength compared to DGFDC at equivalent cross-linking density, which was attributed to increased π–π stacking interactions. The biobased bimodal binder system composed of eFA-L and DGFDC (30 wt %) resulted in a coating with a biobased content of 93 wt %, Y = 440 MPa, and Tg > 50 °C. Better mechanical properties (Y = 700 MPa) were achieved by use of DGEBA (30 wt %), but it results in a significant reduction in biobased content to 62 wt %.
quote
| GB/T 7714-2015 | [1] Harald Silau, Alicia G. Garcia, John M. Woodley, et al. ACS Applied Polymer Materials, 2022(4). DOI:10.1021/acsapm.1c01351. |
| MLA | [1] Harald Silau, et al., ACS Applied Polymer Materials, no. 4, 2022, https://doi.org/10.1021/acsapm.1c01351. |
| APA | [1] Harald Silau, Alicia G. Garcia, John M. Woodley, Kim DamJohansen, & Anders E. Daugaard. (2022). ACS Applied Polymer Materials(4). https://doi.org/10.1021/acsapm.1c01351 |
| IEEE | [1] Harald Silau, Alicia G. Garcia, John M. Woodley, Kim DamJohansen, and Anders E. Daugaard, ACS Applied Polymer Materials, no. 4, 2022, doi: 10.1021/acsapm.1c01351. keywords: {biobased;epoxy;lignin;diglycidyl furan2;5dicarboxylate;thermoset} |
