Efficient Dye-Sensitized Solar Cells with Voltages Exceeding 1 V through Exploring Tris(4-alkoxyphenyl)amine Mediators in Combination with the Tris(bipyridine) Cobalt Redox System AITranslate
Abstract AITranslate
Tandem redox electrolytes, prepared by the addition of a tris(p-anisyl)amine mediator into classic tris(bipyridine)cobalt-based electrolytes, demonstrate favorable electron transfer and reduced energy loss in dye-sensitized solar cells. Here, we have successfully explored three tris(4-alkoxyphenyl)amine mediators with bulky molecular structures and generated more effective tandem redox systems. This series of tandem redox electrolytes rendered solar cells with very high photovoltages exceeding 1 V, which approaches the theoretical voltage limit of tris(bipyridine)cobalt-based electrolytes. Solar cells with power conversion efficiencies of 9.7–11.0% under 1 sun illumination were manufactured. This corresponds to an efficiency improvement of up to 50% as compared to solar cells based on pure tris(bipyridine)cobalt-based electrolytes. The photovoltage increases with increasing steric effects of the tris(4-alkoxyphenyl)amine mediators, which is attributed to a retarded recombination kinetics. These results highlight the importance of structural design for optimized charge transfer at the sensitized semiconductor/electrolyte interface and provide insights for the future development of efficient dye-sensitized solar cells.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsenergylett.8b00872
Chinese Library Classification Number:
Citation Information:
Tandem redox electrolytes, prepared by the addition of a tris(p-anisyl)amine mediator into classic tris(bipyridine)cobalt-based electrolytes, demonstrate favorable electron transfer and reduced energy loss in dye-sensitized solar cells. Here, we have successfully explored three tris(4-alkoxyphenyl)amine mediators with bulky molecular structures and generated more effective tandem redox systems. This series of tandem redox electrolytes rendered solar cells with very high photovoltages exceeding 1 V, which approaches the theoretical voltage limit of tris(bipyridine)cobalt-based electrolytes. Solar cells with power conversion efficiencies of 9.7–11.0% under 1 sun illumination were manufactured. This corresponds to an efficiency improvement of up to 50% as compared to solar cells based on pure tris(bipyridine)cobalt-based electrolytes. The photovoltage increases with increasing steric effects of the tris(4-alkoxyphenyl)amine mediators, which is attributed to a retarded recombination kinetics. These results highlight the importance of structural design for optimized charge transfer at the sensitized semiconductor/electrolyte interface and provide insights for the future development of efficient dye-sensitized solar cells.
quote
| GB/T 7714-2015 | [1] Yan Hao, Wenxing Yang, Martin Karlsson, et al. ACS Energy Letters, 2018(3). DOI:10.1021/acsenergylett.8b00872. |
| MLA | [1] Yan Hao, et al., ACS Energy Letters, no. 3, 2018, https://doi.org/10.1021/acsenergylett.8b00872. |
| APA | [1] Yan Hao, Wenxing Yang, Martin Karlsson, Jiayan Cong, Shihuai Wang, Xing Li, Bo Xu, Jianli Hua, Lars Kloo, & Gerrit Boschloo. (2018). ACS Energy Letters(3). https://doi.org/10.1021/acsenergylett.8b00872 |
| IEEE | [1] Yan Hao, Wenxing Yang, Martin Karlsson, Jiayan Cong, Shihuai Wang, Xing Li, Bo Xu, Jianli Hua, Lars Kloo, and Gerrit Boschloo, ACS Energy Letters, no. 3, 2018, doi: 10.1021/acsenergylett.8b00872. |
