High-Performance CuInS2 Quantum Dot Laminated Glass Luminescent Solar Concentrators for Windows AITranslate
Abstract AITranslate
Building-integrated sunlight harvesting utilizing laminated glass luminescent solar concentrators (LSCs) is proposed. By incorporating high quantum yield (>90%), NIR-emitting CuInS2/ZnS quantum dots into the polymer interlayer between two sheets of low-iron float glass, a record optical efficiency of 8.1% is demonstrated for a 10 cm × 10 cm device that transmits ∼44% visible light. After completing prototypes by attaching silicon solar cells along the perimeter of the device, the electrical power conversion efficiency was certified at 2.2% with a black background and at 2.9% using a reflective substrate. This “drop-in” LSC solution is particularly attractive because it fits within the existing glazing industry value chain with only modest changes to typical glazing products. Performance modeling predicts >1 GWh annual electricity production for a typical urban skyscraper in most major U.S. cities, enabling significant energy cost savings and potentially “net-zero” buildings.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsenergylett.7b01346
Chinese Library Classification Number:
Citation Information:
Building-integrated sunlight harvesting utilizing laminated glass luminescent solar concentrators (LSCs) is proposed. By incorporating high quantum yield (>90%), NIR-emitting CuInS2/ZnS quantum dots into the polymer interlayer between two sheets of low-iron float glass, a record optical efficiency of 8.1% is demonstrated for a 10 cm × 10 cm device that transmits ∼44% visible light. After completing prototypes by attaching silicon solar cells along the perimeter of the device, the electrical power conversion efficiency was certified at 2.2% with a black background and at 2.9% using a reflective substrate. This “drop-in” LSC solution is particularly attractive because it fits within the existing glazing industry value chain with only modest changes to typical glazing products. Performance modeling predicts >1 GWh annual electricity production for a typical urban skyscraper in most major U.S. cities, enabling significant energy cost savings and potentially “net-zero” buildings.
quote
| GB/T 7714-2015 | [1] Matthew R. Bergren, Nikolay S. Makarov, Karthik Ramasamy, et al. ACS Energy Letters, 2018(3). DOI:10.1021/acsenergylett.7b01346. |
| MLA | [1] Matthew R. Bergren, et al., ACS Energy Letters, no. 3, 2018, https://doi.org/10.1021/acsenergylett.7b01346. |
| APA | [1] Matthew R. Bergren, Nikolay S. Makarov, Karthik Ramasamy, Aaron Jackson, Rob Guglielmetti, & Hunter McDaniel. (2018). ACS Energy Letters(3). https://doi.org/10.1021/acsenergylett.7b01346 |
| IEEE | [1] Matthew R. Bergren, Nikolay S. Makarov, Karthik Ramasamy, Aaron Jackson, Rob Guglielmetti, and Hunter McDaniel, ACS Energy Letters, no. 3, 2018, doi: 10.1021/acsenergylett.7b01346. |
