Study of Microstructures of Steel-bonded Cemented Carbides from Prealloyed Powder AITranslate
Abstract AITranslate
In this paper are analyzed the effects of carbon on microstructures of steel-bonded cemented carbides from prealloyed powder.Formation of WC and compound carbide is described.The results showed that the amount of WC precipitates is dependant on the carbon content,the addition of 0.6% of carbon black can resutlt in microstructure similar to that of the traditional steel-bonded cemented carbide.
KeyWords AITranslate
1杨瑞成.模具材料DT－40钢结硬质合金的工艺与性能[J].甘肃工业大学学报,1995,21(2):28-32. 被引量：3
2丁厚福.WC溶解对钢结硬质合金组织的影响[J].材料科学与工艺,1997,5(1):86-89. 被引量：6
3杨瑞成.DT－40钢结合金硬质相与基体的交互作用[J].甘肃工业大学学报,1995,21(4):36-40. 被引量：2
1王澈,钟涛兴,周美玲.WC钢结硬质合金再生研究[J].硬质合金,2001,18(3):146-149.
1王澈,钟涛兴,周美玲.钢结硬质合金预合金粉的研究[J].稀有金属与硬质合金,2002,30(2):7-10. 被引量：1
2左洪松,栾道成,王正云,李亚军,秦琴.不同含量复式碳化物对细晶硬质合金性能的影响[J].中国钨业,2011,26(6):27-30. 被引量：6
3陈雪松.影响复式碳化物(TiC-WC)固溶氧含量有关因素的研究[J].硬质合金,1999,16(3):159-161.
4王澈,钟涛兴,周美玲.WC钢结硬质合金再生研究[J].硬质合金,2001,18(3):146-149.
5左中眉,栾道成,田瀚林,陈晓男.(W,Ti,Ta)C复式碳化物对WC-(6%～8%)Co超细硬质合金性能的影响[J].中国钨业,2013,28(5):36-40. 被引量：2
6张立.WC添加方式对Cr_3C_2基硬质合金性能的影响[J].硬质合金,1998,15(2):102-104. 被引量：2
7王澈,钟涛兴,周美玲.烧熔的钢结硬质合金组织的研究[J].稀有金属与硬质合金,2001,29(1):18-23. 被引量：7
8易忠来,邵刚勤,李佳,张卫丰,王冲,段兴龙,林华幌,郭景坤.直接还原碳化法制备TiC-WC-Ni超细粉末[J].材料导报,2004,18(F04):163-164.
9廖诗兰.梯度结构硬质合金涂层刀片的金相观察[J].中国钨业,2009,24(6):35-38. 被引量：1
10高志国,杨涤心,魏世忠,龙锐.钢结硬质合金粉末／碳钢液相烧结复合过程研究[J].材料导报,2005,19(F11):446-447.
Basic Information:
DOI：
Chinese Library Classification Number:TF125.32[冶金工程—粉末冶金]
Citation Information:
In this paper are analyzed the effects of carbon on microstructures of steel-bonded cemented carbides from prealloyed powder.Formation of WC and compound carbide is described.The results showed that the amount of WC precipitates is dependant on the carbon content,the addition of 0.6% of carbon black can resutlt in microstructure similar to that of the traditional steel-bonded cemented carbide.
quote
| GB/T 7714-2015 | [1] WANG Che, ZHONG Tao-xing, ZHOU Mei-ling. Study of Microstructures of Steel-bonded Cemented Carbides from Prealloyed Powder[J]. Rare Metals and Cemented Carbides, 2001(3): 6-9. |
| MLA | [1] WANG Che, et al., "Study of Microstructures of Steel-bonded Cemented Carbides from Prealloyed Powder." Rare Metals and Cemented Carbides, no. 3, 2001, pp. 6-9. |
| APA | [1] WANG Che, ZHONG Tao-xing, & ZHOU Mei-ling. (2001). Study of Microstructures of Steel-bonded Cemented Carbides from Prealloyed Powder. Rare Metals and Cemented Carbides(3), 6-9. |
| IEEE | [1] WANG Che, ZHONG Tao-xing, and ZHOU Mei-ling, "Study of Microstructures of Steel-bonded Cemented Carbides from Prealloyed Powder," Rare Metals and Cemented Carbides, no. 3, pp. 6-9, 2001. keywords: {WC;prealloyed powder steel-bonded carbide;carbide} |