daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Research on the Characteristics of Multilayer YBCO Superconducting Film Prepared with TFA-MOD Method AITranslate

Academic Affairs Office of Beijing Industrial Vocational and Technical College
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Five-layer YBa2Cu3O7-δ film was prepared on LaAlO3 single crystal substrate by TFA-MOD, with total film thickness of 1 μm,critical current density (Jc) of 1.6 MA/cm^2 and critical current (L) of 160 A/cm. The Jc values of single-layer film and three-layer film are 3.5 MA/cm^2 and 1.75 MA/cm^2 ,respectively. No cracks and obvious pores are observed in cross-sectional TEM images of three-layer film and five-layer film, and interfaces among the layers are smooth. With the increase of film thickness, critical current density decreases ,probably caused by film performance degradation.

KeyWords AITranslate

YBCO superconducting film TFA-MOD method LaAlO3 single crystal substrate critical current critical current density

1Smith J A, Cima M J, Sonnenberg N. High critical cur- rent density thick MOD-derived YBCO films[J]. IEEE Trnasaction on Applied Superconductivity, 1999,9 ( 2 ) : 1 531-1 534.

2Foltyn S R. Thick Superconducting films for high cur- rent coated conductors[A]. Superconductivity for Elec- tric Systems Program Review[C]. Washington: Office of Electricity Delivery & Energy Reliability,2002.

3Dam B, Huijbregtse J M, Klaassen F C, et al. Origin of high critical currents in YBa2Cu3 O7-δ superconducting thin films[J]. Nature,1999,399(3) :439-442.

4Robert W Schwartz. Chemical solution deposition of perovskite thin films [J]. Chem Mater, 1999, 9 ( 11 ) : 2 325-2 340.

5Solovyov V F, Wiesmann H J, Suenaga M. Nucleation of YBazCu307 from precursor films using the barium flu- oride process[J]. IEEE Transaction on Applied Super- conductivity,2005,15(2):2 739-2 742.

6Paul C McIntyre, Michael J Cima,Man Fai Ng. Metalor- ganic deposition of high-Jc Ba2YCu3O7-δ thin films from trifluoroacetate precursor onto (100) SrTiO3 [J]. J Appl Phys,1990,68(8):4 183-4 187.

7Sathyamurthy S, Salama K. Application of solution depo- sition to fabricate Y-Ba-Cu-O coated conductor[J]. IEEE Transaction on Applied Superconductivity, 2001,11 ( 1 ) : 2 935-2 938.

8Feenstra R, Lindemer T B, Budai J D,et al. Effect of ox- ygen pressure on the synthesis of YBa2Cu3O7-δ thin films by post-deposition annealing[J]. J Appl Phys, 1991,69(9)..6 569-6 585.

9Takeshi Araki,humi Hirabayashi. Review of a chemical approach to YBa2Cu3O7-δ-coated superconductors-met- alorganic deposition using trifluoroacetates[J].Supercod Sci Technol, 2003,16 (11) : R71-R94.

1王连红,李弢,古宏伟.采用MOD法在LAO上制备YBCO超导薄膜的Raman光谱研究[J].低温与超导,2009,37(1):1-4.

2郭志超,索红莉,刘志勇,刘敏,马麟.超导临界电流测量方法与原理[J].功能材料,2010,41(12):2041-2044. 被引量:16

3王茺,张鹏翔,张国勇,吴慧军,陈雪梅.YBa_2Cu_3O_(7-δ)薄膜的最佳厚度研究[J].昆明理工大学学报:理工版,2003,28(6):28-30. 被引量:1

4张文涛,张兴义,刘伟,周军,周又和.轴向拉伸应变对YBCO涂层导体V-I特性曲线的影响研究[J].低温与超导,2016,44(2):34-38. 被引量:1

5王超,王秋良.多种优化方法及其在高温超导磁体优化设计中的应用[J].低温物理学报,2004,26(4):350-357. 被引量:9

6瞿青云,刘华军,陈敬林,陈环宇,武玉,陈治友,潘皖江.HTS双饼线圈的加工工艺及实验研究[J].低温与超导,2013,41(9):42-46. 被引量:10

7马红霞,索红莉,王颖,刘敏,周美玲.掺杂物对MgB_2超导电性能影响的研究进展[J].低温与超导,2006,34(2):118-122. 被引量:1

8Tao Jia,Chao Wan,Limin Zhao,Yu Zhou,Qingyuan Zhao,Min Gu,Xiaoqing Jia,Labao Zhang,Biaobing Jin,Jian Chen,Lin Kang.Temperature dependence of niobium superconducting nanowire single-photon detectors in He-3 cryocooler[J].科学通报:英文版,2014(28):3549-3553. 被引量:2

9李佳蔚,王银顺,付瑜,时晨杰.准各向同性高温超导股线的弯曲特性研究[J].低温与超导,2015,43(12):41-45. 被引量:3

10于璟泽,毕延芳,丁开忠,林贤军.ITER电流引线高温超导叠制作工艺及性能测试[J].低温物理学报,2009,31(1):87-90. 被引量:3

Basic Information:

DOI:

Chinese Library Classification Number:TB43[一般工业技术]

Citation Information:

Five-layer YBa2Cu3O7-δ film was prepared on LaAlO3 single crystal substrate by TFA-MOD, with total film thickness of 1 μm,critical current density (Jc) of 1.6 MA/cm^2 and critical current (L) of 160 A/cm. The Jc values of single-layer film and three-layer film are 3.5 MA/cm^2 and 1.75 MA/cm^2 ,respectively. No cracks and obvious pores are observed in cross-sectional TEM images of three-layer film and five-layer film, and interfaces among the layers are smooth. With the increase of film thickness, critical current density decreases ,probably caused by film performance degradation.

quote

GB/T 7714-2015 [1] CHEN Jin. Research on the Characteristics of Multilayer YBCO Superconducting Film Prepared with TFA-MOD Method[J]. Rare Metals and Cemented Carbides, 2014(1): 34-37.
MLA [1] CHEN Jin. "Research on the Characteristics of Multilayer YBCO Superconducting Film Prepared with TFA-MOD Method." Rare Metals and Cemented Carbides, no. 1, 2014, pp. 34-37.
APA [1] CHEN Jin. (2014). Research on the Characteristics of Multilayer YBCO Superconducting Film Prepared with TFA-MOD Method. Rare Metals and Cemented Carbides(1), 34-37.
IEEE [1] CHEN Jin, "Research on the Characteristics of Multilayer YBCO Superconducting Film Prepared with TFA-MOD Method," Rare Metals and Cemented Carbides, no. 1, pp. 34-37, 2014. keywords: {YBCO superconducting film;TFA-MOD method;LaAlO3 single crystal substrate;critical current;critical current density}