Preparation of Al_2O_3-doped Mo-based Alloy Powder Mixture AITranslate
Abstract AITranslate
Al2O3/Mo superfine powder was prepared by sol-gel and secondary deoxidization,its phase composition,morphology and size were analyzed by XRD,SEM and TEM,and the effects of related factors on gelling process were discussed.The results show that the powder of the optimal quality is obtained under the conditions of pH2 and the mass ratio of citric acid to ammonium molybdate equal to 1.5.
KeyWords AITranslate
1徐志昌,张萍.溶胶-凝胶法制备喷镀钼粉[J].中国钼业,2007,31(3):23-27. 被引量：3
2李春虎,赵九生,王大祥,张鎏,朱淳礼.纳米Al_2O_3和ZnAl_2O_4尖晶石的制备与表征[J].化工冶金,1996,17(1):44-47. 被引量：2
3李洪桂.稀有金属冶金学[M].北京:冶金工业出版社,2006.6-11.
4张会军,刘开琪.高温型Mo-Al_2O_3金属陶瓷的研制[J].稀有金属材料与工程,2007,36(A01):282-284. 被引量：9
5周玉,武高辉.材料分析测试技术--材料X射线衍射与电子显微分析[M].哈尔滨:哈尔滨工业大学出版社,2005.53-78.
1胡亚杰,徐流杰,周玉成,李继文,刘伟,魏世忠.水热法制备Al_2O_3掺杂钼合金[J].材料热处理学报,2015,36(6):15-20. 被引量：7
2刘强,魏世忠,徐流杰,张丹丹.黏液乳头型室管膜瘤9例临床病理分析[J].热加工工艺,2012,41(6):70-72. 被引量：1
3陈闯,魏世忠,周志红,张国赏,李继文,徐流杰.溶胶-凝胶法制备Al_2O_3/Mo纳米粉末研究[J].粉末冶金技术,2013,31(2):108-113. 被引量：2
4张盘龙,倪锋,赵晶晶,魏世忠.钼基掺杂合金的研究现状[J].硬质合金,2013,30(2):107-112. 被引量：10
5胡亚杰,徐流杰,周玉成,魏世忠.Al_2O_3掺杂钼合金粉末的形貌变化[J].稀有金属与硬质合金,2014,42(6):28-32. 被引量：1
6钟建华,江志平,余向阳,刘芳.Al_2O_3对Mo-W-Co高温合金力学性能的影响[J].上海有色金属,2016,37(1):15-19.
1欧阳玲玉,叶艳君,刘芳.Al_2O_3含量对Mo-WC-Co钼合金性能的影响[J].特种铸造及有色合金,2016,36(12):1323-1326. 被引量：2
2董帝,王承阳.钼合金制备工艺的研究进展[J].粉末冶金技术,2017,35(4):304-309. 被引量：20
3郭圣达,鲍瑞,易健宏,羊建高,刘亮,杨平.SPS制备含钼WC-6Co硬质合金的工艺性能[J].中国有色金属学报,2018,28(3):556-564. 被引量：6
4李敏.钼镧合金厚板材退火工艺对其热成形性影响研究[J].中国钨业,2018,33(3):41-45. 被引量：2
5杨礼林,张启富,贺智勇,李晓刚.HfC添加对钼钨合金高温等离子烧蚀性能影响及机理分析[J].粉末冶金材料科学与工程,2018,23(2):137-146. 被引量：7
6彭淑静,王建中,唐立丹,唐克.脉冲电磁场辅助浸渍法制备CoMo/γ-Al_2O_3加氢脱硫催化剂[J].燃料化学学报,2018,46(12):1498-1504. 被引量：1
7段柏华,张钊,杨栋林,王德志.微波烧结工艺对6%Al2O3/Mo复合材料结构和性能的影响[J].有色金属科学与工程,2019,10(4):59-65. 被引量：2
8张立生,李慧,张汉鑫,梁精龙.纳米Fe3O4应用及制备工艺研究进展[J].粉末冶金技术,2019,0(3):233-238. 被引量：4
9杨毅超,林小辉,李延超,高选乔,梁静,李来平.ODS强化钼铼合金的再结晶温度研究[J].中国钼业,2020,44(3):46-48. 被引量：2
10李娜,徐流杰,窦彩虹,魏世忠.氧化钇掺杂对钼合金高温力学性能的影响[J].稀有金属,2020,44(6):578-584. 被引量：9
1易明.核能工业用超耐热钼基合金的开发[J].中国钼业,1994,18(3):12-14.
2卢翠芬,于淑兰.PM－TZC钼基合金的相分析[J].冶金分析,1996,16(6):12-13.
3孙尧卿,杨日夫,夏风,娄彦良.Al_2O_3掺杂对立方ZrO_2材料性能的影响[J].华中理工大学学报,1991,19(5):77-82.
4Kaht.,MM,陈润甫.铸造变形钼合金中铼和钨的分布[J].钨钼材料,1992(4):75-77.
5谢晓梅.Re的合金化对钼基合金应变和断裂规律性的影响[J].钨钼材料,1990(4):45-46.
6胡亚杰,徐流杰,周玉成,魏世忠.Al_2O_3掺杂钼合金粉末的形貌变化[J].稀有金属与硬质合金,2014,42(6):28-32. 被引量：1
7Д.,ЮВ,李汉广.钼和钼基合金的耐热涂层[J].钨钼材料,1990(4):1-3.
8王治国,张新辉,孔祥华.一种钼基合金及其制备方法[J].中国钼业,2007,31(3):37-37.
9章硕,胡树兵,陈文旗,张辽.灰铁基Cr-n-Al_2O_3复合电刷镀层的性能[J].材料工程,2012,40(9):23-27. 被引量：5
10李惠萍.耐高温涂钨钼材[J].中国钼业,2004,28(6):9-9.
Basic Information:
DOI：
Chinese Library Classification Number:TG146.412[金属学及工艺—金属材料]
Citation Information:
Al2O3/Mo superfine powder was prepared by sol-gel and secondary deoxidization,its phase composition,morphology and size were analyzed by XRD,SEM and TEM,and the effects of related factors on gelling process were discussed.The results show that the powder of the optimal quality is obtained under the conditions of pH2 and the mass ratio of citric acid to ammonium molybdate equal to 1.5.
quote
| GB/T 7714-2015 | [1] HOU Feng-liang, NI Feng, DAI Bao-zhu, et al. Preparation of Al_2O_3-doped Mo-based Alloy Powder Mixture[J]. Rare Metals and Cemented Carbides, 2010(4): 17-20. |
| MLA | [1] HOU Feng-liang, et al., "Preparation of Al_2O_3-doped Mo-based Alloy Powder Mixture." Rare Metals and Cemented Carbides, no. 4, 2010, pp. 17-20. |
| APA | [1] HOU Feng-liang, NI Feng, DAI Bao-zhu, WEI Shi-zhong, & XU Liu-jie. (2010). Preparation of Al_2O_3-doped Mo-based Alloy Powder Mixture. Rare Metals and Cemented Carbides(4), 17-20. |
| IEEE | [1] HOU Feng-liang, NI Feng, DAI Bao-zhu, WEI Shi-zhong, and XU Liu-jie, "Preparation of Al_2O_3-doped Mo-based Alloy Powder Mixture," Rare Metals and Cemented Carbides, no. 4, pp. 17-20, 2010. keywords: {sol-gel;secondary deoxidization;Al2O3/Mo superfine powder;Al2O3 doping;Mo-based alloy} |