Optimization of Solid Solution and Aging Processes of Mg-10Y Alloy AITranslate
Abstract AITranslate
The processes of solid solution and aging of Mg-10Y alloy are investigated and the process optimization conditions are confirmed by microstructure observation and hardness measurement.The results show that proper solid solution and aging treatment can improve the microstructure and the hardness.By 540 ℃×6 h solid solution,Mg24Y5 phase is almost entirely dissolved into the matrix.And then by 250 ℃×2 h aging treatment,lots of Mg24Y5 phase precipitates to ensure a maximum hardness of Mg-10Y alloy.
KeyWords AITranslate
1Mordike B L,Ebert T.Magnesium:Properties-applications-potential[J].Materials Science and Engineering,2001,A302:37-45.
2王小强,李全安,张兴渊.耐热镁合金的研究现状和发展方向[J].热加工工艺,2007,36(14):66-70. 被引量：16
3谢建昌,李全安,李建弘,张兴渊.耐热镁合金及其开发思路[J].铸造技术,2008,29(1):124-127. 被引量：36
4张新明,彭卓凯,陈健美,邓运来.耐热镁合金及其研究进展[J].中国有色金属学报,2004,14(9):1443-1450. 被引量：107
5李德辉,李志成,刘路,邹壮辉.时效对Mg-Y-Nd合金的影响[J].材料研究学报,2003,17(5):483-488. 被引量：7
6沙桂英,韩恩厚,于涛,徐永波,刘路,高国忠.Mg-Y-Nd合金的蠕变行为及其微观机制[J].金属学报,2003,39(10):1025-1030. 被引量：17
7张修丽,李德辉,刘路.Mg-Y-Nd合金中的析出相[J].材料导报,2006,20(F05):465-466. 被引量：9
8马志新,李德富,李彦利.Mg-Y-Nd-Zr合金加工工艺与组织演化的研究[J].稀有金属,2006,30(6):719-723. 被引量：15
1Li Quanan,Zhang Qing,Wang Yaogui,Zhou Wei.Effects of Sm addition on microstructure and mechanical properties of a Mg-10Y alloy[J].中国铸造：英文版,2014(1):28-32. 被引量：7
1张禛,张小联,杨初斌,方玲,韩宝军.LiF-SmF3-Sm2O3熔盐中Sm(Ⅲ)的电化学行为研究[J].赣南师范大学学报,2018,0(6):46-49.
2陈晓亚,李全安,陈雷雷,周耀.Mg-5Gd-3Y-0.5Zr铸造镁合金的高温蠕变行为[J].铸造,2015,64(8):776-779.
3Hong-hui Liu,Zhi-liang Ning,Hai-chao Sun,Fu-yang Cao,Hao Wang,Xin-yi Zhao,Jian-fei Sun.Microstructure and elevated-temperature tensile properties of differential pressure sand cast Mg-4Y-3Nd-0.5Zr alloy[J].中国铸造：英文版,2016,0(1):30-35. 被引量：1
4张清,李全安,陈君,张兴渊.时效对Mg-5Y-3Sm-0.8Ca合金组织及硬度的影响[J].金属热处理,2018,43(1):163-166. 被引量：4
5贵云玮,李全安,张兴渊,陈晓亚,王颂博,欧阳云飞,董要港.热处理对铸造Mg-5Y-2Nd-3Sm-0.5Zr合金组织和力学性能的影响[J].材料热处理学报,2018,39(5):23-30. 被引量：3
6顾侃,肖旅,曾小勤,陈彬.航空航天用高强度Mg-RE系合金的研究进展[J].上海航天（中英文）,2022,39(6):84-95.
7张清,王莹,李萍.Mg-Y-Sm系合金的设计和力学性能的研究进展[J].材料热处理学报,2019,40(5):17-23. 被引量：7
1巩向鹏,张晓燕,高红选,樊磊,钱虎.热处理工艺对铝合金电工圆杆性能的影响[J].有色金属：冶炼部分,2014(12):37-40. 被引量：2
2郝红元,曹士锐,郝曜,吕海琴.新型铁基高温合金固溶时效工艺[J].金属热处理,2009(4):85-87. 被引量：5
3谭国寅,吴云峰,杨钢,孙彦华,岳有成.固溶时效工艺对TC4钛合金冲击性能的影响[J].铸造技术,2016,37(5):902-903. 被引量：4
4答建成,周细应,彭以阳,周涛,张有为,聂志云,翟靖.固溶时效工艺对A356铝合金轮毂组织与性能的影响[J].热加工工艺,2016,45(14):184-186. 被引量：3
5李红英,刘洋,胡继东,武岳.固溶时效工艺对ZA27合金组织和性能的影响[J].材料热处理学报,2012,33(11):73-77.
6刘永飞,刘宏亮,赵献益,张益.固溶时效对Inconel718合金组织和力学性能的影响[J].机械工程材料,2016,40(3):49-51. 被引量：1
7张坤,刘志义,冯春.添加微量Ag对高Zn超高强铝合金微观组织和力学性能的影响[J].中国有色金属学报,2005,15(1):116-122. 被引量：15
8丁瑞华.固溶时效工艺对7075铝合金板材搅拌摩擦焊接接头疲劳性能的影响[J].轻合金加工技术,2017,45(4):56-60. 被引量：3
9王悔改,宋延沛,王非.TB5合金的多重固溶时效工艺[J].金属热处理,2013,38(11):72-75. 被引量：1
10胡铁牛,孙明仁.固溶时效工艺对2195铝锂合金低温拉伸性能的影响[J].有色金属与稀土应用,2009(2):8-12.
Basic Information:
DOI：
Chinese Library Classification Number:TG146.452[金属学及工艺—金属材料]
Citation Information:
The processes of solid solution and aging of Mg-10Y alloy are investigated and the process optimization conditions are confirmed by microstructure observation and hardness measurement.The results show that proper solid solution and aging treatment can improve the microstructure and the hardness.By 540 ℃×6 h solid solution,Mg24Y5 phase is almost entirely dissolved into the matrix.And then by 250 ℃×2 h aging treatment,lots of Mg24Y5 phase precipitates to ensure a maximum hardness of Mg-10Y alloy.
quote
| GB/T 7714-2015 | [1] ZHANG Qing, LI Quan-an, JING Xiao-tian, et al. Optimization of Solid Solution and Aging Processes of Mg-10Y Alloy[J]. Rare Metals and Cemented Carbides, 2010(4): 21-23. |
| MLA | [1] ZHANG Qing, et al., "Optimization of Solid Solution and Aging Processes of Mg-10Y Alloy." Rare Metals and Cemented Carbides, no. 4, 2010, pp. 21-23. |
| APA | [1] ZHANG Qing, LI Quan-an, JING Xiao-tian, & ZHANG Xing-yuan. (2010). Optimization of Solid Solution and Aging Processes of Mg-10Y Alloy. Rare Metals and Cemented Carbides(4), 21-23. |
| IEEE | [1] ZHANG Qing, LI Quan-an, JING Xiao-tian, and ZHANG Xing-yuan, "Optimization of Solid Solution and Aging Processes of Mg-10Y Alloy," Rare Metals and Cemented Carbides, no. 4, pp. 21-23, 2010. keywords: {Mg-10Y alloy;solid solution;aging;process optimization} |