The Effects of ZrO_2 Addition on the Mechanical Property of Si_3N_4 Composite Ceramic Material AITranslate
Abstract AITranslate
ZrO2-Si3N4 composite ceramic material was prepared by non-pressurized sintering and characterized by drainage method,SEM and DDL100 universal tensile machine. The effects of ZrO2 content were investigated on the density, microstructure and mechanical properties of Si3N4 ceramics. The results show that the density of Si3N4 ceramics increases with increased ZrO2 content,while bending strength and fracture toughness first increase and then decrease. When ZrO2 content is up to 10% ,the bending strength and fracture toughness of Si3N4 are the maximum, i. e. 362 MPa and 7.0 MPa · m^1/2, respectively. The mechanism of ZrO2 toughening to Si3N4 ceramics is based on stress-induced phase transition.
KeyWords AITranslate
1饶平根,陈玉如,叶建东,林广涌,徐之文.GPS ZrO_2(Y_TZP)_Si_3N_4复合材料的显微结构[J].华南理工大学学报：自然科学版,1999,27(10):70-74. 被引量：2
2周瑾,饶平根,毛骏飙,叶建东.GPSZrO_2-Si_3N_4复合材料性能的研究[J].中国陶瓷,1998,34(4):5-8. 被引量：2
3Terao F F, Miyamoto Y, Koizumi M. Characteristics of ZrO2-dispersed Si3N4 without additives fabricated by hot isostatie pressing[J]. J Am Ceram Soc, 1988,71 (3) : 167 -169.
4岳振星,徐洁,盛绪敏.ZrO_2对热压Si_3N_4性能的影响[J].硅酸盐通报,1993,12(4):9-14. 被引量：5
5Falk L K L, Rundren K. Microstructure and short-term oxidation of hot-pressed Si3N4/ZrO2 ( + Y2O3 ) ceramics [J]. J Am Ceram Soc, 1992,75(1) :28-35.
6Hirano S,hayashi T, Nakashima T. Characterization of pressureless sintered β-SiMon with Y2O3 -doped ZrO2 [J]. Advance in Ceramics, 1988,24 : 127-132.
7陈守刚,尹衍升,周春华,赵同广.氧化锆相变稳定机制的研究进展及应用[J].硅酸盐通报,2004,23(3):73-76. 被引量：30
8翟萍,王重海,于宏林,王卫,陈达谦,李伶,邢政鹏.ZrO_2颗粒对Si_3N_4/SiO_2陶瓷复合材料性能的影响[J].陶瓷,2008(10):51-54. 被引量：1
9臧建兵,王明智,王艳辉.ZrO_(2)(Y_(2)O_(3))增韧的氮化硅烧结体的性能及相关系[J].复合材料学报,2000,17(4):76-79. 被引量：7
10余正国.无机材料综合实验-结构陶瓷材料系列实验指导书[EB/OL].http://www.docin.com/p-86638671.html,2010-10-09.
1赵波,陈凡,童景琳.超声磨削材料去除率的理论分析与试验研究[J].河南理工大学学报：自然科学版,2013,32(3):302-307. 被引量：5
2杨宁,李立凯,赵先林.原位生长VC-WC-W_2C增强镍基激光熔覆层的耐蚀性研究[J].稀有金属与硬质合金,2014,42(1):42-45. 被引量：2
3杨宁,吴旌贺.粉末含量和激光功率对熔覆涂层裂纹敏感性的影响[J].应用激光,2014,34(5):411-414. 被引量：1
4杨宁,李立凯.WC-W_2C-VC颗粒增强镍基熔覆层的热力学研究[J].应用激光,2015,35(3):300-303. 被引量：1
5赵旭东.石墨烯与氧化铝陶瓷基复合材料的性能研究[J].陶瓷,2018(1):64-71. 被引量：1
6杨宁,李立凯.激光熔覆（V2O5+WO3+C）/Ni60涂层的磨损性能研究[J].稀有金属与硬质合金,2019,47(4):54-57.
7邹文劲,杨平,吕东霖,褚骆靖.高韧性氮化硅陶瓷研究进展[J].陶瓷学报,2021,42(6):919-931. 被引量：4
1马新毅.三维超声辅助平面磨削力研究[J].金刚石与磨料磨具工程,2016,36(5):69-74. 被引量：2
2高东强,王蕊,陈威,王哲.激光熔覆改善材料性能的研究进展[J].热加工工艺,2017,46(12):14-18. 被引量：19
3李昊真,杨勇,徐善瑞,王玉玲.大功率参数下20CrMnTi基体激光熔覆Ni、Co基合金的熔覆层性能[J].热加工工艺,2018,47(2):212-216. 被引量：6
4王晓峰,赵瑞山,谌志伟.氩弧熔覆NiCrWCAl合金涂层组织结构与性能研究[J].稀有金属与硬质合金,2018,46(3):13-18. 被引量：1
5张能,魏昕,汪永超.纵扭复合振动超声加工运动特性研究[J].组合机床与自动化加工技术,2018(11):78-80. 被引量：2
6张春华,张瀚方,刘凯,谭俊哲,张松.真空熔覆原位自生W_xC/Ni基复合涂层的组织及耐磨性能[J].沈阳工业大学学报,2019,41(1):25-30. 被引量：3
7赵明利,仝攀攀,聂立新,吕晓峰.基于遗传BP神经网络的内圆磨削ZTA陶瓷材料去除率预测[J].制造技术与机床,2019,0(9):44-47.
8付饶.石墨烯建筑材料的研究应用现状及前景展望[J].天津建设科技,2019,29(6):44-50.
9胡叶妮,王时英.不同自由质量块对复频超声加工效率的影响[J].机械设计与制造,2020(7):59-62. 被引量：1
10丁文锋,曹洋,赵彪,徐九华.超声振动辅助磨削加工技术及装备研究的现状与展望[J].机械工程学报,2022,58(9):244-269. 被引量：7
1朱锦锦,于心爱,李晓玲,朱建君.弹性聚氨酯/蒙脱土纳米复合材料的研究[J].广州化工,2014,42(15):70-72. 被引量：3
2薛强,艾兴,赵军,周咏辉,袁训亮.纳米TiC对Si_3N_4基复合陶瓷材料性能和微观结构的影响[J].山东大学学报：工学版,2008,38(3):69-72. 被引量：2
3矫义来,韩亚苓,王双,孙泰礼.ZrO_2粉料在Al_2O_3-SiC纳米复合陶瓷中的作用[J].沈阳工业大学学报,2005,27(4):389-392. 被引量：3
4赵馨月,卢德宏,郭红星,包昂,李海舟.球状结构钢基MMCs/钢三维互穿网络复合材料的制备[J].特种铸造及有色合金,2016,36(8):852-855. 被引量：3
5马勤,康沫狂,薛群基.ZrO_2增韧MoSi_2的作用机制与K_(IC)测试方法的响应关系[J].金属热处理学报,2000,21(2):89-94. 被引量：2
6李翔,徐金富,张修庆,续晓霄,符轲,张秀香.应力诱导相变对氧化锆陶瓷断裂韧性的影响[J].材料热处理学报,2016,37(1):40-44. 被引量：5
7超大口径紫铜管在中铝洛铜拉制成功[J].现代材料动态,2012(5):19-20.
8赵散梅,张新明,郑开宏,王娟,陈亮,李林.ZTA/高铬铸铁基复合材料的制备及磨损性能研究[J].铸造技术,2011,32(12):1673-1676. 被引量：18
9马勤,阎秉钧,上官献邦,杨延清,康沫狂.氧化锆增韧二硅化钼复合材料的压痕断裂韧性[J].甘肃工业大学学报,1995,21(4):32-35. 被引量：2
10郑开宏,赵散梅,王娟,陈亮,李林.颗粒增强高铬铸铁基复合材料的制备、组织与性能[J].铸造,2012,61(2):165-168. 被引量：17
Basic Information:
DOI：
Chinese Library Classification Number:TB332[一般工业技术—材料科学与工程]
Citation Information:
ZrO2-Si3N4 composite ceramic material was prepared by non-pressurized sintering and characterized by drainage method,SEM and DDL100 universal tensile machine. The effects of ZrO2 content were investigated on the density, microstructure and mechanical properties of Si3N4 ceramics. The results show that the density of Si3N4 ceramics increases with increased ZrO2 content,while bending strength and fracture toughness first increase and then decrease. When ZrO2 content is up to 10% ,the bending strength and fracture toughness of Si3N4 are the maximum, i. e. 362 MPa and 7.0 MPa · m^1/2, respectively. The mechanism of ZrO2 toughening to Si3N4 ceramics is based on stress-induced phase transition.
quote
| GB/T 7714-2015 | [1] LI Jian, LI Chun-wei, XIA Heng, et al. The Effects of ZrO_2 Addition on the Mechanical Property of Si_3N_4 Composite Ceramic Material[J]. Rare Metals and Cemented Carbides, 2012(1): 38-40. |
| MLA | [1] LI Jian, et al., "The Effects of ZrO_2 Addition on the Mechanical Property of Si_3N_4 Composite Ceramic Material." Rare Metals and Cemented Carbides, no. 1, 2012, pp. 38-40. |
| APA | [1] LI Jian, LI Chun-wei, XIA Heng, LIU Fan, LI Yan-fen, YANG Liang, & YANG Jun. (2012). The Effects of ZrO_2 Addition on the Mechanical Property of Si_3N_4 Composite Ceramic Material. Rare Metals and Cemented Carbides(1), 38-40. |
| IEEE | [1] LI Jian, LI Chun-wei, XIA Heng, LIU Fan, LI Yan-fen, YANG Liang, and YANG Jun, "The Effects of ZrO_2 Addition on the Mechanical Property of Si_3N_4 Composite Ceramic Material," Rare Metals and Cemented Carbides, no. 1, pp. 38-40, 2012. keywords: {Si3 N4 ceramics;ZrO2 toughening;density;microstructure;mechanical properties} |