Optimization of Preparation Conditions and Performance Characterization of Ceramic Coatings on 304 Steel Surface AITranslate
Abstract AITranslate
The composite ceramic coating on 304 steel surface was prepared by coating with SiO2,Al2O3 and MgO as raw materials.The corrosion resistance and thermal shock resistance of the ceramic coating were studied.The effects of material ratio,sintering temperature and heating rate on the surface morphology and properties of the ceramic coating were analyzed.The results show that when the ratio of SiO2,Al2O3,MgO aggregate(mass ratio 65∶20∶15)to water glass is 1∶5,sintering temperature is 750℃,heating rate is 2℃/min,and sintering time is 30 min,the ceramic coating without crack and with uniform composition and good surface quality can be prepared.The ceramic coating shows excellent corrosion resistance in both NaCl solution and salt spray,which is significantly improved compared with stainless steel.The ceramic coating also has good thermal shock resistance.
KeyWords AITranslate
1曾爱香,唐绍裘.金属基陶瓷涂层的制备、应用及发展[J].陶瓷研究,1998,13(4):7-10. 被引量：34
2张景德,尹衍升,李静,张虹.陶瓷涂层材料的应用与发展[J].机械工程材料,2002,26(11):5-6. 被引量：23
3张家生,王黔平,吴丽华.金属基陶瓷涂层的制备[J].河北理工学院学报,2007,29(2):106-108. 被引量：6
4相珺,刘尊智,张爱民,马胜男,王东宇.不锈钢表面SiO_2系陶瓷涂层的耐蚀性研究[J].腐蚀科学与防护技术,2016,28(4):341-345. 被引量：3
5李青,陈艳.金属陶瓷涂层耐蚀性能研究[J].材料保护,2000,33(5):47-50. 被引量：8
6王东生,田宗军,王泾文,段宗银,沈理达,黄因慧.激光重熔等离子喷涂Al_2O_3-13％TiO_2陶瓷涂层热震性能[J].应用激光,2010,30(4):264-269. 被引量：6
1李月明,沈宗洋,李润润,孙熠,李志科.三步法评价陶瓷涂层密度[J].硅酸盐学报,2019,47(8):1053-1056.
2韩仁利.粉细砂地层改性水玻璃注浆试验研究[J].山西交通科技,2018(1):12-13. 被引量：3
3魏博(编译),王守权(校).不定形耐火材料的高温性能对抗热震性的影响[J].耐火与石灰,2019,44(4):43-43. 被引量：2
4宋俊,高玙,李振环,程博闻.超亲水聚苯硫醚复合膜的制备及性能[J].天津工业大学学报,2019,38(4):7-12.
5包亦望,马德隆.陶瓷涂层的残余应力评价及其尺寸效应[J].硅酸盐学报,2019,47(8):1033-1038. 被引量：2
6姚晶晶,陈义宝,陈星羽,夏文.关于空调用组合件螺钉镀层耐蚀性能分析研究[J].探索科学,2019,0(1):126-126.
7左雅萌,高珊,廖阳生,尚晋东,高利珍.SUZ-4分子筛膜的制备及其渗透汽化性能[J].辽宁工程技术大学学报：自然科学版,2019,0(2):168-173.
8张留伟,陈丹.喷涂距离对等离子喷涂Al2O3-TiB2陶瓷涂层的影响[J].材料保护,2019,0(7):108-111. 被引量：1
9宋谋胜,张杰,李勇,王应,张东方.利用锰渣合成堇青石/钙长石复相陶瓷及其抗热震性能研究[J].功能材料,2019,50(8):8150-8155. 被引量：6
10王利忠,李斌,王英民,魏汝省,侯晓蕊,张世伟.N型4H-SiC表面改性及性能研究[J].电子工艺技术,2019,40(4):237-240. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TG174.453[金属学及工艺—金属表面处理]
Citation Information:
The composite ceramic coating on 304 steel surface was prepared by coating with SiO2,Al2O3 and MgO as raw materials.The corrosion resistance and thermal shock resistance of the ceramic coating were studied.The effects of material ratio,sintering temperature and heating rate on the surface morphology and properties of the ceramic coating were analyzed.The results show that when the ratio of SiO2,Al2O3,MgO aggregate(mass ratio 65∶20∶15)to water glass is 1∶5,sintering temperature is 750℃,heating rate is 2℃/min,and sintering time is 30 min,the ceramic coating without crack and with uniform composition and good surface quality can be prepared.The ceramic coating shows excellent corrosion resistance in both NaCl solution and salt spray,which is significantly improved compared with stainless steel.The ceramic coating also has good thermal shock resistance.
quote
| GB/T 7714-2015 | [1] LIU Fu, XIANG Jun, SUN Li-yue, et al. Optimization of Preparation Conditions and Performance Characterization of Ceramic Coatings on 304 Steel Surface[J]. Rare Metals and Cemented Carbides, 2019(4): 65-69. |
| MLA | [1] LIU Fu, et al., "Optimization of Preparation Conditions and Performance Characterization of Ceramic Coatings on 304 Steel Surface." Rare Metals and Cemented Carbides, no. 4, 2019, pp. 65-69. |
| APA | [1] LIU Fu, XIANG Jun, SUN Li-yue, ZHANG Yue, & MA Sheng-nan. (2019). Optimization of Preparation Conditions and Performance Characterization of Ceramic Coatings on 304 Steel Surface. Rare Metals and Cemented Carbides(4), 65-69. |
| IEEE | [1] LIU Fu, XIANG Jun, SUN Li-yue, ZHANG Yue, and MA Sheng-nan, "Optimization of Preparation Conditions and Performance Characterization of Ceramic Coatings on 304 Steel Surface," Rare Metals and Cemented Carbides, no. 4, pp. 65-69, 2019. keywords: {ceramic coating;coating method;corrosion resistance;thermal shock resistance;stainless steel} |