Simulation and Design of Enclosed Rare Earth Electrolytic Cell with Bottom-Liquid Cathode AITranslate
Abstract AITranslate
ANSY10.0 software was used to simulate the temperature field and electric field of 20kA electrolytic cell with bottom-liquid cathode,and based on the calculation results,the enclosed electrolytic cell with polar distance of 10cm and radius of 92cm was designed.The anode weight can be reduced by segmenting anode without electric field disturbance,and the residual anode consumption can be decreasing by the fixing way of assembling steel claw and graphite.The designed cell cover can improve current efficiency and reduce energy consumption,and the designed N2 inlet can prevent graphite consumption at anode sides attributed to oxidation.
KeyWords AITranslate
1石富.稀土电解槽的研究现状及发展趋势[J].中国稀土学报,2007,25(S1):70-76. 被引量：22
2庞思明,颜世宏,李宗安,陈德宏,徐立海,赵斌.我国熔盐电解法制备稀土金属及其合金工艺技术进展[J].稀有金属,2011,35(3):440-450. 被引量：79
3刘余九.稀土金属冶炼工艺进展.中国稀土学报,1984,1(14):74-74.
4DonaldR.Sadoway,李运姣.稀土金属的熔盐电解[J].稀土,1992,13(5):63-64. 被引量：3
5陈德宏,颜世宏,李宗安,庞思明,徐立海,郭栩毅.3000A液态下阴极电解制备稀土金属关键技术研究[J].中国稀土学报,2011,29(6):769-772. 被引量：7
6王军,张作良,涂赣峰,吴文远.10kA底部阴极稀土熔盐电解槽电场的模拟[J].稀土,2010,31(4):36-39. 被引量：21
7王军,王春慧,涂赣峰,任雁秋,米兰.10kA底部阴极稀土熔盐电解槽热平衡计算[J].稀土,2008,29(5):61-63. 被引量：12
8邓左民,张小联,王俊.稀土电解槽温度场的数值分析[J].江西有色金属,2004,18(1):26-27. 被引量：12
9张小联,邓左民,王俊,游宏亮.稀土金属块状多阳极连续电解[J].江西有色金属,2003,17(3):28-30. 被引量：7
10陶沙,陆继东,包崇爱,黄俊,罗海岩.铝电解槽电场分析与模拟研究[J].有色金属：冶炼部分,2005(3):20-23. 被引量：6
1王海辉,逄启寿.大电流稀土电解槽的优化分析[J].机械设计与制造,2017(9):77-79. 被引量：7
2吴富姬,欧阳健强,杨文龙,罗璇,伍昕宇.10kA底部阴极稀土电解槽的电场仿真[J].湿法冶金,2017,36(5):430-433. 被引量：5
3王亮,逄启寿.稀土电解槽三维电场和温度场的分析研究[J].中国有色冶金,2017,46(6):44-47. 被引量：7
4龚姚腾,熊云鹏,逄启寿,王海辉.阴极对稀土电解槽电场影响的数值模拟[J].制造业自动化,2019,41(3):126-128.
5薛娟琴,李芳,唐长斌.槽形结构对10 kA稀土电解槽流场分布的影响[J].稀土,2019,40(3):41-49. 被引量：1
6龚姚腾,李玉泽,逄启寿,熊云鹏,张浩.稀土电解槽真空吸铸流场仿真分析[J].稀土,2020,41(4):139-145.
7逄启寿,叶楠,张浩,周宏杰.6kA稀土电解槽电极位置对电场影响的模拟分析[J].机械设计与制造,2021(2):157-159. 被引量：1
1吴富姬,杨文龙,李建,罗璇,欧阳健强.10kA底部阴极结构电解槽热平衡分析[J].湿法冶金,2018,37(1):78-81.
2冯羽生,逄启寿,许礼刚.不同阴阳极圆心距下稀土电解槽的电解特性分析[J].厦门大学学报：自然科学版,2018,57(4):581-586. 被引量：9
3薛娟琴,李芳,唐长斌.槽形结构对10 kA稀土电解槽流场分布的影响[J].稀土,2019,40(3):41-49. 被引量：1
4龚姚腾,李玉泽,逄启寿,王海辉,冯羽生.多因素对稀土电解槽电解效率的影响[J].有色金属工程,2019,9(8):53-58. 被引量：6
5逄启寿,张雨开,黄杰,张浩.稀土电解槽不同阴极结构的电解特性分析[J].稀土,2019,40(5):17-23. 被引量：4
6闫光礼,冯羽生,徐水太.镝铁阴极电蚀对稀土电解槽电解特性的影响[J].有色金属科学与工程,2019,10(6):92-96. 被引量：1
7刘康毅,高鹏.6kA镨钕电解槽不同阴极直径下的电热场耦合模拟[J].有色金属工程,2020,10(2):60-65. 被引量：1
8叶楠,逄启寿,张浩,王海辉.大电流稀土电解槽阳极结构研究[J].中国稀土学报,2020,38(1):83-89. 被引量：5
9唐焱,刘金.稀土金属及合金12kA电解槽优化设计仿真研究[J].装备制造技术,2020(3):5-9. 被引量：2
10张恒星,吕晓军,衷水平,王俊娥,陈杭,刘颂,曾小鹏,简勇章.稀土电解槽电场仿真与阴极结构优化[J].中国稀土学报,2020,38(5):667-676. 被引量：3
1胡希安,王乃森,彭国强.液态阴极法制取铅钙合金[J].上海金属：有色分册,1992,13(5):1-4. 被引量：1
2李建民.槽盖布在铜电解中的应用[J].中国有色冶金,2004,33(2):22-23. 被引量：2
3周亚平,佘世云.焦炭筛分箅条筛的改进[J].冶金设备管理与维修,2000,18(5):30-30.
4李静.圆筒混合机衬板安装方式的改进[J].烧结球团,2008,33(4):56-58. 被引量：2
5秦芳,于金龙.搅拌槽的结构设计[J].甘肃冶金,2013,35(3):27-29.
6周建国,成明科.规范操作 降低转炉氧气消耗[J].梅山科技,2001(4):21-23.
7麻长利.烧结车防漏货密封改造研究[J].本钢技术,2010(4):32-34.
8高志强.混合机衬板改造[J].烧结球团,2013,38(3):19-21. 被引量：2
9郝会斌.炉壳上段长寿浅析[J].酒钢科技,2012,0(3):310-312.
10刘建华.熔盐电解法生产稀土金属的阳极消耗[J].稀有金属,1996,20(5):361-364. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TF845[冶金工程—有色金属冶金]
Citation Information:
ANSY10.0 software was used to simulate the temperature field and electric field of 20kA electrolytic cell with bottom-liquid cathode,and based on the calculation results,the enclosed electrolytic cell with polar distance of 10cm and radius of 92cm was designed.The anode weight can be reduced by segmenting anode without electric field disturbance,and the residual anode consumption can be decreasing by the fixing way of assembling steel claw and graphite.The designed cell cover can improve current efficiency and reduce energy consumption,and the designed N2 inlet can prevent graphite consumption at anode sides attributed to oxidation.
quote
| GB/T 7714-2015 | [1] XUE Juan-qin, ZHANG Jie, TANG Zhang-bin, et al. Simulation and Design of Enclosed Rare Earth Electrolytic Cell with Bottom-Liquid Cathode[J]. Rare Metals and Cemented Carbides, 2014(3): 19-22. |
| MLA | [1] XUE Juan-qin, et al., "Simulation and Design of Enclosed Rare Earth Electrolytic Cell with Bottom-Liquid Cathode." Rare Metals and Cemented Carbides, no. 3, 2014, pp. 19-22. |
| APA | [1] XUE Juan-qin, ZHANG Jie, TANG Zhang-bin, BI Qiang, & GUO Zhong-yuan. (2014). Simulation and Design of Enclosed Rare Earth Electrolytic Cell with Bottom-Liquid Cathode. Rare Metals and Cemented Carbides(3), 19-22. |
| IEEE | [1] XUE Juan-qin, ZHANG Jie, TANG Zhang-bin, BI Qiang, and GUO Zhong-yuan, "Simulation and Design of Enclosed Rare Earth Electrolytic Cell with Bottom-Liquid Cathode," Rare Metals and Cemented Carbides, no. 3, pp. 19-22, 2014. keywords: {rare earth electrolytic cell;bottom-liquid cathode;enclosed structure;molten salt electrolysis;ANSYS software} |