Study on Microhardness of the Steel-bonded Carbide DGJW30 AITranslate
Abstract AITranslate
Heat treatment was done on the steel-bonded carbide DGJW30 prepared by electro-slag melting and casting. The mierostructure of steel-bonded carbide DGJW30 was studied by metallographic analysis, scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS）, X-ray diffraction （XRD） focusing on the microhardness change rule of steel substrate, ledeburite and undissolved WC of the steelbonded carbide in its heat treatment process.
KeyWords AITranslate
1侬健桃.我国铟产业现状及发展[J].有色冶炼,2002,31(4):12-14. 被引量：34
2朱为民.炼铁高炉烟尘中锌铟的综合利用试验研究[J].矿产保护与利用,2007,27(4):49-51. 被引量：9
3刘秉国,彭金辉,张利波,张世敏,毛金龙.高炉瓦斯泥(灰)资源化循环利用研究现状[J].矿业快报,2007,23(5):14-19. 被引量：32
4孙倬.重有色金属冶炼设计手册:铅锌铋卷[M].北京:冶金工业出版社,2008:370-388.
5姚兴娜,单桃云,姚芾.试论在含铟烟尘的生产中提高铟回收率的途径[J].湖南有色金属,2011,27(5):27-31. 被引量：2
1刘爱军,刘宁,陈新杰,马力,石俊.电冶熔铸WC钢结硬质合金断裂韧度研究[J].热处理,2014,29(6):9-12.
2黄曼平,尤显卿,张成军,马建国.电冶熔铸WC／钢复合材料表面激光重熔工艺[J].金属热处理,2008,33(9):19-24. 被引量：1
3尤显卿,马建国,宋雪峰,任昊,黄曼平.电冶熔铸WC/钢复合材料中WC的溶解行为[J].中国有色金属学报,2005,15(9):1363-1368. 被引量：17
4刘爱军,刘宁,汪前进,李其龙.回火温度对电冶熔铸SiC-钢复合材料组织和性能的影响[J].热处理,2015,30(2):28-31.
5黄曼平,尤显卿,马建国,黄世亮,张世军.激光重熔对电冶钢结硬质合金DGJW40组织影响的研究[J].材料热处理学报,2007,28(4):130-134. 被引量：1
6尤显卿,马建国,任昊,宋雪峰,黄曼平.电冶熔铸WC/GCr15钢复合材料的摩擦磨损特性[J].材料热处理学报,2004,25(6):40-43. 被引量：12
7周书助,兰登飞,鄢玲利,尹绍峰.钢结硬质合金的研究进展[J].粉末冶金材料科学与工程,2015,20(5):661-669. 被引量：3
8宋雪峰,尤显卿,郑玉春,马建国,黄曼平.热处理对电冶钢结硬质合金DGJW50显微组织的影响[J].硬质合金,2005,22(1):10-14. 被引量：5
9刘爱军,刘宁,陈新杰,张宏亮.淬火温度对钢结硬质合金DGJW30组织和性能的影响[J].热处理,2014,29(4):24-28.
10张宁,张春红,邵浩彬,付健.复合电冶熔铸WC颗粒增强钢基复合材料的显微缺陷研究[J].徐州工程学院学报：自然科学版,2016,31(3):70-74. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
Heat treatment was done on the steel-bonded carbide DGJW30 prepared by electro-slag melting and casting. The mierostructure of steel-bonded carbide DGJW30 was studied by metallographic analysis, scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS）, X-ray diffraction （XRD） focusing on the microhardness change rule of steel substrate, ledeburite and undissolved WC of the steelbonded carbide in its heat treatment process.
quote
| GB/T 7714-2015 | [1] LIU Ai-jun, LIU Ning, SHI Jun, et al. Study on Microhardness of the Steel-bonded Carbide DGJW30[J]. Rare Metals and Cemented Carbides, 2014(4): 68-72. |
| MLA | [1] LIU Ai-jun, et al., "Study on Microhardness of the Steel-bonded Carbide DGJW30." Rare Metals and Cemented Carbides, no. 4, 2014, pp. 68-72. |
| APA | [1] LIU Ai-jun, LIU Ning, SHI Jun, & MA Li. (2014). Study on Microhardness of the Steel-bonded Carbide DGJW30. Rare Metals and Cemented Carbides(4), 68-72. |
| IEEE | [1] LIU Ai-jun, LIU Ning, SHI Jun, and MA Li, "Study on Microhardness of the Steel-bonded Carbide DGJW30," Rare Metals and Cemented Carbides, no. 4, pp. 68-72, 2014. keywords: {steel-bonded carbide;heat treatment;microhardness;line scan;area scan} |