Study on Microstructure and Wear Resistance of Cast Tungsten Carbide Welding Layer with Different Eutectic Microstructure Content AITranslate
Abstract AITranslate
Using the mixed powder of cast tungsten carbide with different eutectic microstructure content and nickel-based alloy as raw material,the welding layers were prepared by plasma transfer arc (PTA)surfacing.Microstructure and wear resistance of each welding layer were studied by optical microscope,scanning electron microscope and G65 abrasive wear test.The results show that the cast tungsten carbide with high eutectic structure can improve the microstructure of the welding layer,which has the characteristics of uniform distribution of hard phases,no holes and high hardness.At the same time,the wear resistance of the obtained welding layer is improved remarkably.
KeyWords AITranslate
1李玉玺,周伍喜.钨基硬面技术的现状及发展[J].硬质合金,2012,29(5):323-328. 被引量：2
2赵敏海,刘爱国,郭面焕.WC颗粒增强耐磨材料的研究现状[J].焊接,2006(11):26-29. 被引量：41
1余伟,李玉玺,周伍喜,贺香坚,宋灿.碳化钨颗粒增强镍基等离子转移弧粉末堆焊层的微观结构与耐磨性能[J].材料保护,2022,55(10):112-117.
1徐丽倩,杨一晨,杨霁,杨云梅.不同营养状况COPD患者体脂肪量、无脂含量的变化及免疫功能比较[J].慢性病学杂志,2019,19(1):10-13. 被引量：2
2杨林林,赵钰,韩梅,杨利民.北柴胡和狭叶柴胡中黄酮类成分及其关键酶基因表达的组织差异分析[J].中草药,2019,50(1):188-194. 被引量：11
3黄斌,黄海梅,曾晓燕,李玉萍.马铃薯全粉糕点制作配方的优化[J].粮食与油脂,2019,32(2):57-60. 被引量：1
4刘宇宁,甘春雷,王顺成,黎小辉,郑开宏,张辉.烧结温度对石墨烯增强铜基复合材料组织和性能的影响[J].金属热处理,2019,44(2):113-118. 被引量：6
5孙浩然,赵海东,代航,邓德杰.Si元素对挤压铸造Al-5Mg-xSi合金微观组织的影响[J].特种铸造及有色合金,2019,39(3):266-270. 被引量：2
6汤鹏,戴虹,周世恒.槽型轨服役损伤在线焊补维修技术[J].电焊机,2019,49(2):76-79.
7苏楠子.球罐裂纹缺陷分析及修复[J].中国标准化,2018(A01):55-58. 被引量：3
8N.MAKUCH,P.DZIARSKI,M.KULKA,A.PIASECKI,M.TULI?SKI,R.MAJCHROWSKI.添加铌和钼对Nimonic 80A合金激光硼化表面显微组织和磨损行为的影响（英文）[J].中国有色金属学报：英文版,2019,29(2):322-337. 被引量：2
9常煜,赵国瑞,闫星辰,马文有,刘敏.选区激光熔化成形Ti6Al4V合金微弧氧化生物活性膜层的制备、结构及性能[J].表面技术,2019,48(2):100-108. 被引量：1
10叶永权,刘志军,程准,邱昊,李小强.Fe-2Cu-1.5Ni-0.5Mo-0.8C混合粉末的放电等离子烧结过程研究[J].广州航海学院学报,2019,27(1):69-71. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TF841.1[冶金工程—有色金属冶金]
Citation Information:
Using the mixed powder of cast tungsten carbide with different eutectic microstructure content and nickel-based alloy as raw material,the welding layers were prepared by plasma transfer arc (PTA)surfacing.Microstructure and wear resistance of each welding layer were studied by optical microscope,scanning electron microscope and G65 abrasive wear test.The results show that the cast tungsten carbide with high eutectic structure can improve the microstructure of the welding layer,which has the characteristics of uniform distribution of hard phases,no holes and high hardness.At the same time,the wear resistance of the obtained welding layer is improved remarkably.
quote
| GB/T 7714-2015 | [1] LI Wei, XIE Jie, YU Wei, et al. Study on Microstructure and Wear Resistance of Cast Tungsten Carbide Welding Layer with Different Eutectic Microstructure Content[J]. Rare Metals and Cemented Carbides, 2019(1): 60-64. |
| MLA | [1] LI Wei, et al., "Study on Microstructure and Wear Resistance of Cast Tungsten Carbide Welding Layer with Different Eutectic Microstructure Content." Rare Metals and Cemented Carbides, no. 1, 2019, pp. 60-64. |
| APA | [1] LI Wei, XIE Jie, YU Wei, LI Yu-xi, & ZHOU Wu-xi. (2019). Study on Microstructure and Wear Resistance of Cast Tungsten Carbide Welding Layer with Different Eutectic Microstructure Content. Rare Metals and Cemented Carbides(1), 60-64. |
| IEEE | [1] LI Wei, XIE Jie, YU Wei, LI Yu-xi, and ZHOU Wu-xi, "Study on Microstructure and Wear Resistance of Cast Tungsten Carbide Welding Layer with Different Eutectic Microstructure Content," Rare Metals and Cemented Carbides, no. 1, pp. 60-64, 2019. keywords: {cast tungsten carbide;welding layer;eutectic structure;plasma transfer arc surfacing;microstructure;wear resistance} |