Can Medical-Grade Gloves Provide Protection after Repeated Disinfection? AITranslate
Abstract AITranslate
The advent of the COVID-19 pandemic has generated an increased consumption of personal protective equipment (PPE), including gloves and masks, by healthcare workers and by the general public at a global scale. This has generated substantial shortage of these single-use and disposable PPEs that will end up as a landfill waste. Extending the life cycle of PPEs, such as gloves, by disinfecting treatments could help mitigate these concerns. However, the effect of various disinfection treatments on the functionality of gloves is unknown. In this study, six commonly used viral disinfection treatment methods (i.e., ultraviolet (UV) radiation, dry heat, steam, alcohol, chlorine compounds, and quaternary ammonium compounds) were evaluated for their effect on the performance attributes of two commonly used medical-grade gloves and nitrile and vinyl (latex) gloves. The barrier properties of both gloves against water and ethanol vapor flux were not affected up to 10 cycles of disinfection cycles. However, the increase in the disinfection cycle from 10 to 20 slightly reduced their barrier properties with minor variation in the type of disinfection and glove type. Infrared spectroscopy and microscopy investigations confirmed that both types of gloves could withstand up to 20 cycles of disinfection treatments with no observable change in the chemical structure and surface morphology of the disinfected surfaces, respectively. Lastly, tear property testing of the gloves indicated little to no change from the baseline after 20 cycles of treatment in both the nitrile and vinyl-based gloves. Overall, this study indicated that alcohol, UV, and heat treatment could be acceptable disinfection methods that allow the reuse of gloves up to 20 cycles. Such repeated disinfection of gloves not only reduces the strain on the supply of gloves but also decreases the postconsumer landfilled waste and environmental footprint of gloves.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsapm.0c01202
Chinese Library Classification Number:
Citation Information:
The advent of the COVID-19 pandemic has generated an increased consumption of personal protective equipment (PPE), including gloves and masks, by healthcare workers and by the general public at a global scale. This has generated substantial shortage of these single-use and disposable PPEs that will end up as a landfill waste. Extending the life cycle of PPEs, such as gloves, by disinfecting treatments could help mitigate these concerns. However, the effect of various disinfection treatments on the functionality of gloves is unknown. In this study, six commonly used viral disinfection treatment methods (i.e., ultraviolet (UV) radiation, dry heat, steam, alcohol, chlorine compounds, and quaternary ammonium compounds) were evaluated for their effect on the performance attributes of two commonly used medical-grade gloves and nitrile and vinyl (latex) gloves. The barrier properties of both gloves against water and ethanol vapor flux were not affected up to 10 cycles of disinfection cycles. However, the increase in the disinfection cycle from 10 to 20 slightly reduced their barrier properties with minor variation in the type of disinfection and glove type. Infrared spectroscopy and microscopy investigations confirmed that both types of gloves could withstand up to 20 cycles of disinfection treatments with no observable change in the chemical structure and surface morphology of the disinfected surfaces, respectively. Lastly, tear property testing of the gloves indicated little to no change from the baseline after 20 cycles of treatment in both the nitrile and vinyl-based gloves. Overall, this study indicated that alcohol, UV, and heat treatment could be acceptable disinfection methods that allow the reuse of gloves up to 20 cycles. Such repeated disinfection of gloves not only reduces the strain on the supply of gloves but also decreases the postconsumer landfilled waste and environmental footprint of gloves.
quote
| GB/T 7714-2015 | [1] Elnaz Esmizadeh, Boon Peng Chang, Dylan Jubinville, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.0c01202. |
| MLA | [1] Elnaz Esmizadeh, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.0c01202. |
| APA | [1] Elnaz Esmizadeh, Boon Peng Chang, Dylan Jubinville, Ewomazino Ojogbo, Curtis Seto, Costas Tzoganakis, & Tizazu H. Mekonnen. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.0c01202 |
| IEEE | [1] Elnaz Esmizadeh, Boon Peng Chang, Dylan Jubinville, Ewomazino Ojogbo, Curtis Seto, Costas Tzoganakis, and Tizazu H. Mekonnen, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.0c01202. keywords: {COVID19 virus;medical gloves;barrier properties;disinfection cycles;tear strength} |
