Effects of Co Content on Microstructure and Mechanical Properties of Cemented Carbides AITranslate
Abstract AITranslate
Cemented carbide materials with different Co content were prepared by powder metallurgy,mechanical properties of the materials were tested at room temperature,and phase composition,microstructure and morphology were studied using XRD,SEM and so on.The results show that with Co content increasing,the binder phase（Co） in the microstructure is of an increased average free path（λγ）,the adjacency degree（C） of WC grains decreases,the bend strength of the material increases but hardness decreases.
KeyWords AITranslate
1程继贵,王华林,夏永红,蒋阳.功能梯度硬质合金和金属陶瓷材料研究的新进展[J].材料导报,2000,14(4):16-17. 被引量：19
2Springs G E. A history of fine grained hardmetal[J]. International Journal of Refractory Metals and Hard Materials, 1995, (13) :241-255.
3张伟.功能梯度材料的研究现状和前景[J].自然杂志,1995,17(4):216-216.
4刘寿荣.WC-Co硬质合金γ相相变[J].稀有金属,2000,24(2):101-105. 被引量：16
5Paranosenkov V P, Kelina 1 Y, Plyasunkova L A,et al. Preparation of dense ceramics based on silicon nitride nanopowders[J]. Refractories and Industrial Ceramic, 2003,44 (4) : 223-226.
6Bellosi A, Vicens J, Medri V, et al. Nanosize silicon ni- tride:Characteristic of doped powders and of the related sintered materials[J]. Appl Phys A,2005,81(5) : 1 007-1023.
7李晋尧,何平.WC－Co合金断裂行为行径的观察和分析[J].粉末冶金技术,1996,14(2):83-87. 被引量：6
8刘寿荣.WC-Co硬质合金的强度[J].硬质合金,2002,19(3):129-135. 被引量：36
1谭敦强,李亚蕾,杨欣,陆磊,陆德平.杂质元素对钨产品结构及性能的影响[J].材料导报,2013,27(17):98-100. 被引量：5
2左中眉,栾道成,田瀚林,陈晓男.(W,Ti,Ta)C复式碳化物对WC-(6%～8%)Co超细硬质合金性能的影响[J].中国钨业,2013,28(5):36-40. 被引量：2
3吴翔,刘小胡,廖军.WC碳量对高钴硬质合金性能与硬质相晶粒度的影响[J].硬质合金,2015,32(1):31-35. 被引量：1
4金哲峰.硬质合金材料对PCB极小径钻头加工性能的影响[J].硬质合金,2015,32(3):182-187. 被引量：7
5宋慧瑾,鄢强,周谋.微钻的回收及分离再利用技术研究[J].成都大学学报：自然科学版,2016,35(3):278-280.
6郑敏利,孙玉双,陈金国,张为,吴磊,李鹏飞.粘焊变质层对硬质合金刀具前刀面温度分布的影响[J].稀有金属与硬质合金,2017,45(2):81-88.
7赵岁春,刘宁,陈爱华.含碳量对WC-13Co硬质合金组织和性能的影响[J].热处理,2017,32(5):38-43. 被引量：3
8宋芳,杨克勇,高小琴,张亚红.钴粉对硬质合金性能的影响[J].金川科技,2018,0(2):17-20.
9董定乾,向新,黄新杰,黄伟,时凯华,张立.热处理对高钴ZL40.5硬质合金组织与性能的影响[J].中国有色金属学报,2019,29(8):1684-1692. 被引量：3
10徐伟,陈玉柏,汤昌仁,胡梦云,梁瑜.高性能非均匀结构硬质合金的制备及其形成机理研究[J].中国钨业,2021,36(1):48-54. 被引量：2
1黄长庚.微量合金元素对硬质合金性能的影响[J].中国材料进展,2014,33(8):492-496. 被引量：5
2郭强,宁甲立.印制电路板用微钻结构的优化设计[J].硬质合金,2015,32(5):317-323. 被引量：3
3屈植华,周志雄,黄威武,罗胜,汤爱民,王社权.基于回归模型的钻削力组成定量测试研究[J].硬质合金,2015,32(5):330-334. 被引量：2
4王文华,陈树茂,张冬梅.掺杂工艺对粗颗粒钨粉制取的影响[J].江西化工,2015,31(6):84-87.
5廖国健,谢文,易丹青.固溶体成分与加量对硬质合金组织和性能的影响[J].硬质合金,2016,33(3):154-160. 被引量：2
6何文,谭敦强,朱红波,邝海,欧阳国霞.铈与YG6硬质合金制备过程中富钙相的交互作用[J].粉末冶金材料科学与工程,2016,21(4):515-521. 被引量：2
7罗来马,施静,昝祥,李萍,罗广南,陈俊凌,吴玉程.掺杂合金元素面向等离子体钨基材料的研究现状与发展趋势[J].中国有色金属学报,2016,26(9):1899-1911. 被引量：10
8左锐,谢文,温光华,陈响明,王社权,黄继武.球磨时间及烧结温度对固溶体粒度的影响[J].硬质合金,2016,33(5):300-310. 被引量：2
9易志强,涂丹,谭敦强,王晓茹,何文,邝海,邹志航,邓冲.砷对紫钨制备及碳化过程的影响[J].稀有金属与硬质合金,2019,47(3):25-30. 被引量：1
10李之旭,范洪远,鲜广,赵海波,熊计.硬质合金基体对TiAlN/TiAlSiCrN/TiSiN多层涂层结构和机械性能的影响[J].硬质合金,2020,37(2):119-126. 被引量：1
1陈红卫.深冷处理对硬质合金机械性能的影响[J].硬质合金,1995,12(1):33-36. 被引量：18
2田润科.新型硬质合金材料的发展[J].机械工人：冷加工,1990(11):24-27.
3彭惠民.快速发展的硬质合金材料[J].机电工程,1989(6):33-37.
4赵昌盛,孔东祥.钢结硬质合金模具热处理及应用[J].模具制造,2006,6(10):80-82. 被引量：3
5黄健.浅谈刀具材料的发展趋势[J].客车技术,2001(4):11-13.
6刘宁,崔昆,胡镇华,陈莉,李勇,程本培.热处理对金属陶瓷组织和抗弯强度的影响[J].金属热处理学报,1996,17(3):28-32. 被引量：2
7颜杰,黄新,孙亚丽,刘清才.热处理对硬质合金结构参数的改变[J].超硬材料工程,2006,18(6):26-30. 被引量：8
8李海艳,刘宁,王丽利.Cr_3C_2对WC-6.5％Co硬质合金组织和性能的影响[J].热处理,2010,25(2):31-34. 被引量：2
9刘强强.Co对电沉积Ni—P／Al2O3合金层的组织影响[J].中国科技博览,2009(32):127-128.
10李亚敏,刘洪军,刘杰,安蓓,郝远.Co对K4169合金铸态组织和性能的影响[J].铸造技术,2010,31(3):280-283. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
Cemented carbide materials with different Co content were prepared by powder metallurgy,mechanical properties of the materials were tested at room temperature,and phase composition,microstructure and morphology were studied using XRD,SEM and so on.The results show that with Co content increasing,the binder phase（Co） in the microstructure is of an increased average free path（λγ）,the adjacency degree（C） of WC grains decreases,the bend strength of the material increases but hardness decreases.
quote
| GB/T 7714-2015 | [1] WANG Li-li, LI Hai-yan, LIU Ning. Effects of Co Content on Microstructure and Mechanical Properties of Cemented Carbides[J]. Rare Metals and Cemented Carbides, 2011(1): 66-69. |
| MLA | [1] WANG Li-li, et al., "Effects of Co Content on Microstructure and Mechanical Properties of Cemented Carbides." Rare Metals and Cemented Carbides, no. 1, 2011, pp. 66-69. |
| APA | [1] WANG Li-li, LI Hai-yan, & LIU Ning. (2011). Effects of Co Content on Microstructure and Mechanical Properties of Cemented Carbides. Rare Metals and Cemented Carbides(1), 66-69. |
| IEEE | [1] WANG Li-li, LI Hai-yan, and LIU Ning, "Effects of Co Content on Microstructure and Mechanical Properties of Cemented Carbides," Rare Metals and Cemented Carbides, no. 1, pp. 66-69, 2011. keywords: {cemented carbide;Co content;microstructure and morphology;mechanical property} |