daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effects of TaC and Y_2O_3 Addition on Microstructure and Properties of Ultrafine YG6 Cemented Carbides AITranslate

School of Materials Science and Engineering, Xihua University;School of Materials Science and Engineering, Xihua University;School of Materials Science and Engineering, Xihua University;School of Materials Science and Engineering, Xihua University;School of Materials Science and Engineering, Xihua University;School of Materials Science and Engineering, Xihua University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The effects of TaC and Y2O3 addition by different dosage on microstructure and properties of ultrafine YG6 cemented carbides were studied based on the unchanged composition and content of the original Cr3C2/VC grain growth compound inhibitor.The results show that TaC can significantly inhibit YG6 grain growth.The YG6 alloy with 0.1%TaC prepared by pressure sintering at 1 380 ℃ has the maximum density,hardness and flexural strength of 99.88%,HRA 93.8 and 1 800 MPa,respectively.The addition of 0.1%Y2O3 can also inhibit YG6 grain growth yet without obvious effect on the other aspects of the alloy.

KeyWords AITranslate

ultrafine cemented carbides YG6 grain growth inhibitor TaC Y2O3

1林晨光.中国超细晶粒WC-Co硬质合金研究进展[J].稀有金属,2004,28(4):762-766. 被引量:20

2吴恩熙,雷贻文.超细硬质合金中晶粒生长抑制剂的作用[J].硬质合金,2002,19(3):136-139. 被引量:50

3Lay S,Hamar-Thibanh S,Lackner A. Location of VC,Cr3C2 codoped WC-CO cermets by HREM and EELS[J].Int Ref Met Hard Mater,2002,(01):61-69.

4Yamamot,Ikuharay,Sakumat. High resolution transmission electron microscopy study in VC-doped WC-CO compound[J].Science and Technology of Advanced Materials,2000,(02):97-104.

5徐庆荣,黎先财,杨沂凤,王燕.超细碳化钨的制备及其性能研究[J].稀有金属,2009,33(1):133-136. 被引量:7

6贾佐诚.超细晶硬质合金的发展[J].硬质合金,2000,17(1):58-63. 被引量:42

7杨逸斐,王兴庆,黄英华,何宝山,郭海亮.超细硬质合金烧结方法与抑制剂的研究[J].上海有色金属,2004,25(4):156-162. 被引量:16

8Xu Chonghai,Ai Xing,Huang Chuanzhen. Research and developmeat of rare earthcemented carbides[J].International Journal of Refraetory Metals & Hard Materials,2001,(01):159-168.

9Lingmu Shou. Effect of TaC on high-temperature strength of WC-Co alloy[J].Powder & Powder Metallurgy,1976,(08):274-286.

10Sadangi R K,Mc Candlish L E,Kear B H. Grains growh inhibition in liquid phase sintered nanophase WC/Co alloys[J].Powder Metallurgy International,1999,(01):27-33.

1杨小璠,李友生,李凌祥,沈志煌,刘菊东.硬质合金高温性能对碳纤维复合材料切削加工的影响研究[J].金刚石与磨料磨具工程,2017,37(5):45-49. 被引量:3

2邝海,谭敦强,何文,王晓茹,邹志航,易志强,白杜娟.稀土元素对硬质合金影响的研究进展[J].稀有金属与硬质合金,2018,46(3):69-74. 被引量:8

3秦琴,吴开霞,荆志杰,陈静,张其虎,张露艳,何睿琪.机械球磨涂覆技术的研究现状及应用[J].稀有金属与硬质合金,2019,47(3):66-69. 被引量:2

4黄公治,尹超,蒋甘澍.碳化物抑制剂在硬质合金中的应用与研发现状[J].硬质合金,2023,40(2):147-157.

1汪艳亮,王云,谢小豪,陈林芳,陈颢.稀土硬质合金研究进展[J].有色金属科学与工程,2019,10(5):106-112. 被引量:9

2鲁振运,杜劲,胡冬梅,王一飞,孙玉晶,张重彦.硬质合金增韧补强机理研究进展[J].有色金属工程,2020,10(7):40-46. 被引量:4

3李友生.高速铣削中TaC(NbC)对硬质合金刀具磨损性能的影响[J].中国机械工程,2020,31(13):1601-1605. 被引量:4

4林凤添.硬质合金高温性能对TC4钛合金高速铣削的影响研究[J].工具技术,2020,54(12):35-38. 被引量:3

5张珊珊,历长云,潘跃武,许磊,胡号.铜包铁粉的应用及制备[J].粉末冶金技术,2020,38(6):465-474. 被引量:3

6鲍君峰,于月光,贾成厂.ZrO2添加量对等离子放电烧结制备WC-6Co组织和性能的影响[J].东北大学学报:自然科学版,2021,42(1):43-48.

7代卫丽,宋月红,刘彦峰,路遇,王瑾,刘凡.AZ31镁合金的SiO_(2)(Mg)涂层的组织及性能研究[J].材料开发与应用,2021,36(5):30-37. 被引量:1

8靳磊,臧传君,鲍贤勇,鲁忠臣,张峰,曾美琴.碳化烧结一步法制备WC-10Co硬质合金的摩擦磨损性能[J].稀有金属与硬质合金,2022,50(2):85-90. 被引量:1

9杨长春,丁翔,田英豪,袁成清,王韶毅.CeO_(2)改性多尺度WC-CoCr涂层组织结构及空蚀性能研究[J].功能材料,2023,54(4):4027-4033.

10钟立钦,叶春林,廖良芳,曹磊,熊仕显,廖春发.稀土熔盐电解渣回收利用技术现状及展望[J].稀有金属与硬质合金,2023,51(2):20-25.

1周博文,李光强,朱诚意,郑建新,付勇,张峰.抑制剂形成元素对取向硅钢中夹杂物析出行为及热轧组织的影响[J].钢铁钒钛,2014,35(5):110-116. 被引量:4

2曹顺华,林信平,李炯义,蔡志勇,谢湛.一种新型晶粒长大抑制剂对YG10硬质合金烧结行为的影响[J].中南大学学报:自然科学版,2005,36(4):533-538. 被引量:8

3赵太源,栾道成,王正云,熊万全.含(W,Ti,Ta)C的超细硬质合金的性能及组织研究[J].硬质合金,2012,29(5):289-296. 被引量:9

4李亚军,栾道成,王正云,左洪松,秦琴.晶粒长大抑制剂对超细WC-9%Co硬质合金性能的影响[J].硬质合金,2011,28(5):288-293. 被引量:11

Basic Information:

DOI:

Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]

Citation Information:

The effects of TaC and Y2O3 addition by different dosage on microstructure and properties of ultrafine YG6 cemented carbides were studied based on the unchanged composition and content of the original Cr3C2/VC grain growth compound inhibitor.The results show that TaC can significantly inhibit YG6 grain growth.The YG6 alloy with 0.1%TaC prepared by pressure sintering at 1 380 ℃ has the maximum density,hardness and flexural strength of 99.88%,HRA 93.8 and 1 800 MPa,respectively.The addition of 0.1%Y2O3 can also inhibit YG6 grain growth yet without obvious effect on the other aspects of the alloy.

quote

GB/T 7714-2015 [1] QIN Qin, LUAN Dao-cheng, WANG Zheng-yun, et al. Effects of TaC and Y_2O_3 Addition on Microstructure and Properties of Ultrafine YG6 Cemented Carbides[J]. Rare Metals and Cemented Carbides, 2012(2): 48-52.
MLA [1] QIN Qin, et al., "Effects of TaC and Y_2O_3 Addition on Microstructure and Properties of Ultrafine YG6 Cemented Carbides." Rare Metals and Cemented Carbides, no. 2, 2012, pp. 48-52.
APA [1] QIN Qin, LUAN Dao-cheng, WANG Zheng-yun, LI Ya-jun, ZUO Hong-song, & ZHAO Tai-yuan. (2012). Effects of TaC and Y_2O_3 Addition on Microstructure and Properties of Ultrafine YG6 Cemented Carbides. Rare Metals and Cemented Carbides(2), 48-52.
IEEE [1] QIN Qin, LUAN Dao-cheng, WANG Zheng-yun, LI Ya-jun, ZUO Hong-song, and ZHAO Tai-yuan, "Effects of TaC and Y_2O_3 Addition on Microstructure and Properties of Ultrafine YG6 Cemented Carbides," Rare Metals and Cemented Carbides, no. 2, pp. 48-52, 2012. keywords: {ultrafine cemented carbides;YG6;grain growth inhibitor;TaC;Y2O3}