The Preparation of Mo-Cu Ultrathin Sheet by Tape-casting AITranslate
Abstract AITranslate
Mo-Cu plates were prepared by tape-casting technique,combined with debinding-sintering process.Then the Mo-Cu ultrathin sheets were acquired by rolling and annealing.The X-ray diffraction (XRD),carbon sulphur analyzer,metallographic microscope,density gauge and microhardness tester were used to characterize the phase,composition,microstructure and the Vickers hardness of Mo-Cu ultrathin sheet at different conditions.XRD analysis shows that only the characteristic diffraction peaks of Mo and Cu were found in Mo-Cu ultrathin sheets,and no new phase was formed.The carbon sulphur analysis shows that the sheets debinding completely,only with the carbon content of 0.01809%.The relative density and the Vickers hardness of the Mo-Cu ultralthin sheet were 98.42%and 266,respectively,which were improved by rolling-annealing technique.
KeyWords AITranslate
1张德尧,吴晓惠.Mo-Cu材料的制作[J].中国钼业,2001,25(4):38-39. 被引量：16
2王东辉,袁晓波,李中奎,郑欣,张军良,张清,白润.钼及钼合金研究与应用进展[J].稀有金属快报,2006,25(12):1-7. 被引量：89
3陈保华,赵晓峰.常用硬度的测试原理及表示方法[J].金属加工：热加工,2008(15):69-71. 被引量：8
4邝用庚,牟科强,徐桂兰,韦昂邦.改善钨渗铜喉衬的高温尺寸稳定性研究[J].稀有金属材料与工程,1997,26(5):30-34. 被引量：15
5李云平,曲选辉,段柏华.W-Cu(Mo-Cu)复合材料的最新研究状况[J].硬质合金,2001,18(4):232-236. 被引量：54
6王婕丽,林文松,姜自旺.电触头用钼铜复合材料的研究现状[J].热加工工艺,2013,42(22):5-8. 被引量：6
7董应虎,周贤良,何新波,华小珍.钼铜复合材料致密度的影响因素研究[J].热加工工艺,2009(6):68-71. 被引量：3
1刘华珠,孟昭光,雷秋丽,张项宾.陶瓷基印制电路板的关键技术研究[J].印制电路信息,2019,27(2):30-33. 被引量：2
2赵德英.新版定碳定硫分析仪检定规程的解读[J].工业计量,2018,28(6):13-14.
3朱思宇,熊政伟,曹林洪,高志鹏.氧化锌压敏陶瓷的微波烧结工艺研究[J].电子元件与材料,2019,38(1):49-55. 被引量：8
4李孟勇,吴奇明.车用电子真空泵不锈钢粉末冶金零件的研制[J].冶金与材料,2018,38(4):50-51.
5严鹏飞,严彪,王联凤,程灵钰.氮化硅光固化增材制造工艺与性能的研究[J].有色金属材料与工程,2018,39(6):12-15. 被引量：5
6韩林轩,张传香,曹方旭,阚彩侠,陶海军.TiO_2/PEN表面改性对柔性DSSC性能的影响[J].材料导报,2018,32(A02):1-4. 被引量：1
7赵经纬,刘贞山,曹以恒,赵丕植.冷轧率与退火工艺对汽车用5754铝合金组织演变的影响[J].材料导报,2018,32(A02):365-370. 被引量：1
8王子博,刘满平,姜奎,秦希,章勇,王圣楠,陈健.退火时间对高压扭转Al-1.0Mg铝合金组织及性能的影响[J].材料导报,2019,33(2):321-324. 被引量：2
9计杰,祝鲁侠,黎军顽,吴晓春.退氮处理对SDHS2模具钢渗氮层组织与性能的影响[J].上海金属,2019,41(1):78-81. 被引量：3
10张雪宽,徐骥,孙俊杰,张永杰,张正好,葛蔚.竖冷设备中烧结矿石偏析行为的GPU高性能模拟[J].力学学报,2019,51(1):64-73. 被引量：11
Basic Information:
DOI：
Chinese Library Classification Number:TG146.41[金属学及工艺—金属材料]
Citation Information:
Mo-Cu plates were prepared by tape-casting technique,combined with debinding-sintering process.Then the Mo-Cu ultrathin sheets were acquired by rolling and annealing.The X-ray diffraction (XRD),carbon sulphur analyzer,metallographic microscope,density gauge and microhardness tester were used to characterize the phase,composition,microstructure and the Vickers hardness of Mo-Cu ultrathin sheet at different conditions.XRD analysis shows that only the characteristic diffraction peaks of Mo and Cu were found in Mo-Cu ultrathin sheets,and no new phase was formed.The carbon sulphur analysis shows that the sheets debinding completely,only with the carbon content of 0.01809%.The relative density and the Vickers hardness of the Mo-Cu ultralthin sheet were 98.42%and 266,respectively,which were improved by rolling-annealing technique.
quote
| GB/T 7714-2015 | [1] LI Bang-yi, WU Fang, FENG Jian, et al. The Preparation of Mo-Cu Ultrathin Sheet by Tape-casting[J]. Rare Metals and Cemented Carbides, 2018(6): 42-46. |
| MLA | [1] LI Bang-yi, et al., "The Preparation of Mo-Cu Ultrathin Sheet by Tape-casting." Rare Metals and Cemented Carbides, no. 6, 2018, pp. 42-46. |
| APA | [1] LI Bang-yi, WU Fang, FENG Jian, ZHANG Jing, & ZHU Yu-bin. (2018). The Preparation of Mo-Cu Ultrathin Sheet by Tape-casting. Rare Metals and Cemented Carbides(6), 42-46. |
| IEEE | [1] LI Bang-yi, WU Fang, FENG Jian, ZHANG Jing, and ZHU Yu-bin, "The Preparation of Mo-Cu Ultrathin Sheet by Tape-casting," Rare Metals and Cemented Carbides, no. 6, pp. 42-46, 2018. keywords: {tape-casting;Mo-Cu;ultrathin sheet;debinding-sintering process;rolling and annealing process} |