Ni-Fe-C Alloy Effect on η-phases Formed during TIG Welding of YG30 with S45C AITranslate
Abstract AITranslate
The welding joints between YG30 and S45C by using Ni-Fe-C alloys as weld metal were obtained by TIG welding.The welding joints were studied by means of optical microscope, SEM, EPMA, X-rays, micro hardness etc. The results showed that the welding joints between YG30 and S45C by TIG welding, can be obtained by using Ni-Fe-C alloys as weld metal,The harmful η phase can be restricted by the addition of C element into Ni-Fe alloys.So the inadequate carbide of the W-Co-C system induced by the C diffusion and the high ingredient Fe are the two vital factors to η phase formation, and η phase was M6C, M12C type carbides
KeyWords AITranslate
1吴冲浒.我国硬质合金产业近期发展思考[J].稀有金属与硬质合金,2000,28(1):26-30. 被引量：13
2陈飞雄,李世魁.硬质合金与球墨铸铁热等静压扩散连接的研究[J].粉末冶金技术,1995,13(1):8-13. 被引量：6
3[苏]卡扎何夫H.φ.材料的扩散焊接[M].北京:国防工业出版社,1980..
4赵秀娟 等.WC-30Co/S45C钢TIG焊焊接接头复合碳化物形成分析[J].材料科学与工艺,2001,:682-682.
5.YB 882—76.硬质合金金相检验方法[S].,1976..
1王立跃,徐道荣.硬质合金的焊接特点、焊接方法与研发进展[J].现代焊接,2010(12):17-20. 被引量：6
2徐培全,姚舜,杨德新,赵秀娟,芦凤桂,陈春焕,王庆章.Study on the Formation of η Phase During TIG Welding[J].上海交通大学学报：英文版,2004,9(3):6-10.
3翟秋亚,徐锦锋,蔡再生.细直径YG5FA硬质合金/45Cr钢储能焊工艺分析[J].焊接学报,2007,28(8):13-16. 被引量：9
4朱警雷,黄继华,张华,赵兴科.硬质合金与钢异种金属焊接的研究进展[J].焊接,2008(2):15-19. 被引量：27
5刘晓平,杨程,章建军.医用一次性牙钻电容储能焊工艺[J].焊接技术,2009,38(12):39-42.
6吴相省.硬质合金/钢活性液相扩散焊接技术研究[J].硬质合金,2011,28(2):103-110. 被引量：5
7徐培全,芦凤桂,张培磊,杨尚磊,于治水.硬质合金/因瓦合金激光-氩弧复合焊缝界面的显微组织与元素扩散[J].机械工程材料,2011,35(4):4-6. 被引量：2
8罗蒙丽.硬质合金钎焊技术的现状与发展[J].硬质合金,2015,0(2):108-118. 被引量：16
9张一鸣,潘金芝,夏爽,赵秀娟,陈春焕.梯度硬质合金与45钢的TIG焊研究[J].机械制造文摘：焊接分册,2018(5):17-21. 被引量：1
1张军锋,罗维,李晓军,张健阁.旋转导向工具导向头系统机械结构分析[J].中国石油和化工标准与质量,2020(8):179-180.
2翟秋亚,梁存琨,成军,徐锦锋.Cu基微晶钎料高频钎焊0Cr18Ni9Nb／YG6分析[J].焊接学报,2008,29(9):23-26. 被引量：2
3赵一生,高志国,魏世忠,杨涤心.碳钢/钢结硬质合金覆层材料制备及界面分析[J].深圳职业技术学院学报,2009,8(3):67-70. 被引量：1
4郦剑,罗娟,罗来马,俞佳,朱流.硬质合金与钢基体钎焊技术的研究进展[J].材料科学与工程学报,2009,27(6):955-958. 被引量：17
5周承商,易健宏,罗述东,彭元东.硬质合金与Cr12冷作钢的微波焊接工艺[J].焊接学报,2010,31(4):41-44. 被引量：2
6康晶,赵麦群,吕娟,赵雪琴,铃木实平.异种金属铁丝-铜板的电容储能冲击焊接[J].焊接学报,2010,31(4):93-96. 被引量：2
7李卓然,刘兵,樊建新,冯吉才.YG8硬质合金和低碳钢的高频感应钎焊[J].焊接学报,2010,31(10):97-100. 被引量：20
8朱蕾蕾,王海龙.基于CuMnCo钎料的YG6C硬质合金与16Mn钢的真空钎焊工艺研究[J].热加工工艺,2012,41(13):185-187. 被引量：3
9徐峰,翟秋亚,陈凯.细直径TA2/0Cr18Ni9Ti棒材储能焊接试验分析[J].焊接学报,2012,33(6):77-80. 被引量：5
10吕鹏,刘庆梅,徐楠.刃具硬质合金与结构钢钎焊工艺研究[J].中国新技术新产品,2012(19):106-106. 被引量：2
1王浩,杨德新,赵秀娟,陈春焕,王庆章.YG30硬质合金与45^#钢TIG焊接头组织及抗弯强度的研究[J].焊接技术,2005,34(1):9-11. 被引量：2
2王浩,杨德新,赵秀娟,陈春焕,王庆章,赵晓辉.YG30硬质合金与45钢TIG焊接头组织及抗弯强度的研究[J].焊接,2004(8):10-13. 被引量：10
3赵秀娟,王浩,杨德新,王庆章.焊丝成份对YG30/钢焊缝组织和硬度的影响[J].硬质合金,2004,21(2):94-98. 被引量：7
4王莎莎,赵秀娟,陈春焕,宋以国,王庆章.填充材料成分对YG30/焊缝界面区组织及硬度的影响[J].稀有金属与硬质合金,2007,35(1):18-21. 被引量：7
5李莉娜,赵秀娟,徐培全,闫祖翔.YG30硬质合金与因瓦合金TIG焊接头的组织与硬度的分析研究[J].硬质合金,2008,25(4):208-213. 被引量：4
6宋以国,赵秀娟,王莎莎,杨德新,赵晓辉,王庆章.焊后退火对YG30与45钢TIG焊界面组织的影响[J].热加工工艺,2007,36(3):20-22. 被引量：2
7宋以国,赵秀娟,杨德新,赵晓辉,王庆章.YG30硬质合金与45钢TIG焊界面组织的分析[J].硬质合金,2005,22(2):69-73. 被引量：10
8赵秀娟,杨德新,田头孝介,高泽幸治,山森英明,鸭田秀一.YG30硬质合金与45钢TIG焊接头组织中η相[J].焊接学报,2003,24(3):35-38. 被引量：24
9赵秀娟,杨德新,王浩,高泽幸治,山森英明,田头孝介.硬质合金与碳钢电子束对接焊接头的显微组织[J].机械工程材料,2005,29(5):21-23. 被引量：10
10赵秀娟,杨德新.硬质合金YG30/45钢TIG焊连接的研究[J].新技术新工艺,2004(3):34-35. 被引量：3
Basic Information:
DOI：
Chinese Library Classification Number:TG14[金属学及工艺—金属材料]
Citation Information:
The welding joints between YG30 and S45C by using Ni-Fe-C alloys as weld metal were obtained by TIG welding.The welding joints were studied by means of optical microscope, SEM, EPMA, X-rays, micro hardness etc. The results showed that the welding joints between YG30 and S45C by TIG welding, can be obtained by using Ni-Fe-C alloys as weld metal,The harmful η phase can be restricted by the addition of C element into Ni-Fe alloys.So the inadequate carbide of the W-Co-C system induced by the C diffusion and the high ingredient Fe are the two vital factors to η phase formation, and η phase was M6C, M12C type carbides
quote
| GB/T 7714-2015 | [1] XU Pei-quan, YANG De-xin, ZHAO Xiu-juan, et al. Ni-Fe-C Alloy Effect on η-phases Formed during TIG Welding of YG30 with S45C[J]. Rare Metals and Cemented Carbides, 2003(2): 18-23. |
| MLA | [1] XU Pei-quan, et al., "Ni-Fe-C Alloy Effect on η-phases Formed during TIG Welding of YG30 with S45C." Rare Metals and Cemented Carbides, no. 2, 2003, pp. 18-23. |
| APA | [1] XU Pei-quan, YANG De-xin, ZHAO Xiu-juan, CHEN Chun-huan, & WANG Qing-zhang. (2003). Ni-Fe-C Alloy Effect on η-phases Formed during TIG Welding of YG30 with S45C. Rare Metals and Cemented Carbides(2), 18-23. |
| IEEE | [1] XU Pei-quan, YANG De-xin, ZHAO Xiu-juan, CHEN Chun-huan, and WANG Qing-zhang, "Ni-Fe-C Alloy Effect on η-phases Formed during TIG Welding of YG30 with S45C," Rare Metals and Cemented Carbides, no. 2, pp. 18-23, 2003. keywords: {YG30;Ni-Fe-C alloys;TIG Welding;η phases} |