Research Status and Prospect of Oxidation Behavior of Nickel-Based Single Crystal Superalloys AITranslate
Abstract AITranslate
Nickel-based single crystal superalloys have become increasingly important in the manufacturing of aircraft engines and gas turbine blades due to their superior mechanical properties,including excellent high-temperature strength and superior fatigue resistance. However,these alloys suffer from the problem of high-temperature oxidation,which can significantly shorten their service life. In order to improve the oxidation resistance and prolong the service life,it is necessary to have a comprehensive understanding of their oxidation behavior. The oxidation kinetics of nickel-based single crystal superalloys can be divided into three stages:the first stage,where the oxidation follows the parabolic law controlled by diffusion;the second stage,where the oxidation rate decreases significantly due to the formation of a continuous dense alumina layer;and the third stage,where the thickness of the oxide film reaches a critical value and detachment occurs,which accelerates the oxidation rate. The oxidation kinetics of different alloys may differ due to the influence of factors such as element content and oxidation temperature. The oxidation kinetics curve exhibits a parabolic law,subparabolic law,and cubic law,and different oxidation stages show different oxidation laws due to changes in the oxide layer (whether a dense alumina layer is formed). The oxide film of nickel-based single crystal superalloys can be divided into three layers:the outer layer of nickel oxide,the middle layer of spinel,and the inner layer of dense alumina. After a period of oxidation,γ′ phase in the matrix can be transformed into γ′ phase at the inner side of alumina film due to the depletion of Al element,forming γ′-free zone. After long-term oxidation,the thickening of the oxide film leads to the peeling of the oxide layer,leaving a large area of γ′-free zone. During the initial oxidation process,the dislocation generated by lattice mismatch can aggregate in the two phases to form a dislocation network,providing a channel for oxygen atoms to diffuse inward. Moreover,the oxidation behavior of nickel-based single crystal superalloys is affected by many factors. First,the element content of the alloy,such as Al,Cr,Si,Hf,and rare earth elements can improve its antioxidation performance of the alloy,while S,Ti,Ru,and other elements have the opposite effect. In addition,the segregation during the solidification process of the alloy can cause inconsistent oxidation behavior between dendrites and intradendritic regions. Specifically,the initial oxidation product between dendrites is mainly aluminum oxide,while the intradendritic region is mainly nickel oxide. In the long-term oxidation process,the alumina layer in the intradendritic region undergoes a process of changing from continuous dense to fragmented and dispersed,while those in the interdendritic region always remains continuous until detachment. Different oxidation conditions also affect the oxidation behavior:as the temperature increases,the oxidation rate of the alloy accelerates,and the thickness of the oxide layer also increases. When loaded applied,the dislocations in the γ matrix increase and aggregate at the interface of γ and γ′ phases,accelerating the outward diffusion rate of Al elements and causing the growth of the oxide layer to accelerate. The oxidation behavior also show anisotropy,specifically,the oxidation resistance of (100) surface is worse than that of (110) surface. This difference may be attributed to the distinct growth structures of oxide on various oriented surfaces,leading to different numbers of short-circuit diffusion paths on the surface,or may be caused by varying diffusion path lengths at the two-phase interfaces in different orientations. The differences in antioxidant properties can also be explained from the perspective of atomic adsorption. First-principles calculations show that different oriented surfaces have different adsorption capacities for oxygen atoms,which lead to the anisotropy of oxidation. The higher the surface roughness is,the more dislocations and defects are near the surface. These defects provide outward diffusion channels for Al ions,rapidly generate a dense alumina layer and improve the antioxidation performance of the alloy. In the future,research on the oxidation of single crystal superalloys can be carried out from the following directions: (1) Utilize in-situ oxidation technology with longer coverage time,more accurate stress-temperature control,and finer observation to establish a more precise oxidation model. (2) Use more high-precision instruments to characterize trace rare earth elements and explore its modification mechanism deeply to achieve precise and efficient doping of rare earth elements. (3) Carry out the research on the multi-factor synergy,coupling two or more conditions to study the oxidation behavior of alloys closest to actual service environment,thus establishing an oxidation model more in line with real situations. (4) Conduct research on the influence of oxidation behavior on alloy creep/fatigue fracture behavior. In-depth study of the relationship between oxidation and mechanical performance such as creep and fatigue are helpful to deepen the understanding of material deformation and failure behavior and improve the service life of components.
KeyWords AITranslate
[1]Long H B,Mao S C,Liu Y N,Zhang Z,Han X D. Microstructural and compositional design of Ni-based single crystalline superalloys―a review[J].Journal of Alloys and Compounds,2018,743:203.
[2]孙晓峰,金涛,周亦胄,胡壮麟.镍基单晶高温合金研究进展[J].中国材料进展,2012,31(12):1.
X F Sun,T Jin,Y Z Zhou,Z L Hu. Research progress of Ni-base single crystal superalloys[J].Progress in Materials in China,2012,31(12):1.
[3]Murakumo T,Kobayashi T,Koizumi Y,Hadara H. Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction[J].Acta Materialia,2004,52(12):3737.
[4]丁青青,贝红斌,赵新宝,张译.透射电子显微学在镍基单晶高温合金领域的应用进展和展望[J].电子显微学报,2020,39(5):586.
Q Q Ding,H B Bei,X B Zhao,Y Zhang. Application of the transmission electron microscopy on Ni-base single crystal superalloys:progress and perspective[J].Journal of Chinese Electron Microscopy Society,2020,39(5):586.
[5]王晓娟,刘林,黄太文,杨文超,岳全召,霍苗,张军,傅恒志.碳对镍基单晶高温合金凝固缺陷影响的研究进展[J].材料导报,2020,34(3):154.
X J Wang,L Liu,T W Huang,W C Yang,Q Z Yue,M Huo,J Zhang,H Z Fu. A review on the influence of carbon addition on the solidification defects in Ni-based single crystal superalloys[J].Materials Reports,2020,34(3):154.
[6]Birks N,Meier G H,Pettit F S. Introduction to High Temperature Oxidation of Metals [M]. Cambridge:Cambridge University Press,Ltd.,2006. 4.
[7]Ellingham H. Reducibility of oxides and sulfides in metallurgical processes[J].Journal of the Chemical Society,1944,63:125.
[8]Richardson F D. The thermodynamics of substances of interest in iron and steel making[J].Jour. Iron Steel Inst.,1952,171:165.
[9]Zhang Z G,Hou P Y,Gesmundo F,Niu Y. Effect of surface roughness on the development of protective Al2O3 on Fe–10Al (at.%) alloys containing 0–10 at.% Cr[J].Applied Surface Science,2006,253(2):881.
[10]Pilling N B,Bedworth R E. The oxidation of metal in high temperature[J].Journal of Institute of Metals,1923,29:529.
[11]施月杰.K4104镍基高温合金沉积MCrAIY涂层抗高温氧化性能研究[D].哈尔滨:哈尔滨工程大学,2011.1.
Y J Shi. Research on High-Temperature Oxidation Property of MCrAlY Coatings on Ni-Base Superalloy K4104[D]. Harbin:Harbin Engineering University,2011. 1.
[12]许明,张志远,肖旋.P添加对一种新型镍基铸造合金高温氧化性能的影响[J].沈阳理工大学学报,2016,35(1):58.
M Xu,Z Y Zhang,X Xiao. Influence of P addition on high temperature oxidation behavior of a new type Ni-based superalloy[J].Journal of Shenyang Ligong University,2016,35(1):58.
[13]范金鑫,张继祥,陆燕玲,李志军,周兴泰,怀平. 新型低Cr镍基合金GH3535高温氧化行为[J].稀有金属,2015,39(5):399.
J X Fan,J X Zhang,Y L Lu,Z J Li,X T Zhou,P Huai. Isothermal oxidation behavior of new Ni-based superalloy GH3535 with low Cr level[J].Chinese Journal of Rare Metals,2015,39(5):399.
[14]Mott N F. The theory of the formation of protective oxide films on metals,II[J].Transactions of the faraday society,1940,35:472.
[15]Pei H Q,Wen Z X,Yue Z F. Long-term oxidation behavior and mechanism of DD6 Ni-based single crystal superalloy at 1050 ℃ and 1100 ℃ in air[J].Journal of Alloys and Compounds,2017,704:218.
[16]Hu Y B,Cao T S,Cheng C Q,Zhang L,Zhao J. Oxidation behavior of a single-crystal Ni-based superalloy over the temperature range of 850 ℃–950 ℃ in air[J].Applied Surface Science,2019,484:209.
[17]Mallikarjuna H T,Richards N L,Caley W F. Effect of alloying elements and microstructure on the cyclic oxidation performance of three nickel-based superalloys[J].Materialia,2018,4:487.
[18]Evangelou A,Soady K A,Lockyer S,Gao N,Reed P A S. Oxidation behavior of single crystal nickel-based superalloys:intermediate temperature effects at 450–550 ℃[J].Materials Science and Technology,2018,34(14):1679.
[19]Tan Z H,Wang X G,Song W,Yang Y H,Liu J L,Liu J D. Oxidation behavior of a novel nickel-based single crystal superalloy at elevated temperature[J].Vacuum,2020,175:109284.
[20]Qin L,Pei Y L,Li S S,Zhao X B,Gong S K,Xu H B. Role of volatilization of molybdenum oxides during the cyclic oxidation of high-Mo containing Ni-based single crystal superalloys[J].Corrosion Science,2017,129:192.
[21]Liu C T,Ma J,Sun X F. Oxidation behavior of a single-crystal Ni-base superalloy between 900 and 1000 ℃ in air[J].Journal of alloys and compounds,2010,491(1–2):522.
[22]Zhou X F,Chen G,Feng Y Y,Qi Z X,Wang M Z,Li P,Cheng J L. Isothermal oxidation behavior of a new Re-free nickel-based single-crystal superalloy at 950 ℃[J].Rare Metals,2017,36:617.
[23]Younes C M,Allen G C,Nicholson J A. High temperature oxidation behavior of single crystal superalloys RR3000 and CMSX-4[J].Corrosion Engineering,Science and Technology,2007,42(1):80.
[24]Hu Y B,Cheng C Q,Cao T S,Zhang L,Zhao L. A study on the multiple stages of oxidation kinetics in a single crystal nickel-based superalloy[J].Corrosion Science,2021,188:109512.
[25]Ma J Y,Jiang W X,Wang J,Zhang Y F,Zhang Z. Initial oxidation behavior of a single crystal superalloy during stress at 1150 ℃[J].Scientific Reports,2020,10(1):1.
[26]Ding Q Q,Shen Z J,Xiang S S,Tian H,Li J X,Zhang Z. In-situ environmental TEM study of γ′-γ phase transformation induced by oxidation in a nickel-based single crystal superalloy[J].Journal of Alloys and Compounds,2015,651:255.
[27]Long H B,Wei H,Liu Y N,Mao S C,Zhang J X,Xiang S S,Chen Y H,Gui W M,Li Q,Zhang Z,Han X D. Effect of lattice misfit on the evolution of the dislocation structure in Ni-based single crystal superalloys during thermal exposure[J].Acta Materialia,2016,120:95.
[28]丁青青.二代镍基单晶高温合金的显微结构演变[D].杭州:浙江大学,2017. 1.
Q Q Din. Research on Microstructure Evolution of a Second Generation Nickel Based Single Crystal Superalloy[D]. Hangzhou:Zhejiang University,2017. 1.
[29]Wright P K,Evans A G. Mechanisms governing the performance of thermal barrier coatings[J].Current opinion in solid state and Materials Science,1999,4(3):255.
[30]费孝顺,赵玉涛,梁向锋,徐维台.一种新型高温合金在900和1100 ℃下200 h的氧化行为[J].材料科学与工艺,2018,26(5):59.
X S Fei,Y T Zhao,X F Liang,W T Xu. Study on oxidation behavior of a new single-crystal superalloy at 900 and 1100 ℃ for 200 h[J].Materials Science and Technology,2018,26(5):59.
[31]徐芳,乐沛雯,李寒松,黄爱华,张剑锋,鲍俊.第二代镍基单晶高温合金高温氧化行为及机制研究[J].稀有金属,2023,47(4):493.
F Xu,P W Le,H S Li,A H Huang,J F Zhang,J Bao. High-temperature oxidation behavior and mechanism of second-generation nickel-based single crystal superalloy[J].Chinese Journal of Rare Metals,2023,47(4):493.
[32]常剑秀,王栋,董加胜,王迪,吴汉昌,张功,楼琅洪.铼对镍基单晶高温合金恒温氧化行为的影响[J].材料研究学报,2017,31(9):695.
J X Chang,D Wang,J S Dong,D Wang,H C Wu,G Zhang,L H Lou. Effect of rhenium addition on isothermal oxidation behavior of a nickel-base single crystal superalloy[J].Chinese Journal of Materials Research,2017,31(9):695.
[33]张宗鹏,张思倩,王栋,王迪,陈立佳,楼琅洪,张健.ppm级S对第二代抗热腐蚀镍基单晶高温合金恒温氧化行为的影响[J].铸造,2019,68(3):232.
Z P Zhang,S L Zhang,D Wang,D Wang,L J Cheng,L H Lou,J Zhang. Effect of ppm level sulfur addition on isothermal oxidation behavior of a nickel-base single crystal superalloy[J].Foundry,2019,68(3):232.
[34]韩汾汾,李辉,张健,楼琅洪.Ta对铸造镍基高温合金氧化行为的影响[J].钢铁研究学报,2011,23(s2):416.
F F Han,H Li,J Zhang,L H Lou. Effect of Ta on oxidation behavior of cast nickel-based superalloy[J].Journal of Iron and Steel Research,2011,23(s2):416.
[35]卢旭东,田素贵,孙振东.高Cr镍基单晶合金1050 ℃的高温氧化性能[J].铸造,2011,60(2):175.
X D Lu,S G Tian,Z D Sun. Oxidation behavior of a high chromium single-crystal Ni-base superalloy at 1050 ℃[J].Foundry,2011,60(2):175.
[36]Meng J,Jin T,Sun X F,Hu Z Q. Effect of Ru on the oxidation behavior of a Ni-base single-crystal superalloy[J].Science of Advanced Materials,2017,9(11):1922.
[37]Sato A,Chiu Y L,Reed R C. Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications[J].Acta Materialia,2011,59(1):225.
[38]Shi Z X,Liu S Z,Han M,Li J R. Influence of yttrium addition on high temperature oxidation resistance of single crystal superalloy[J].Journal of Rare Earths,2013,31(8):795.
[39]肖旋,徐乐,秦学智,侯介山,王常帅,郭建亭,周兰章.稀土元素Y和Ce对定向凝固镍基高温合金高温氧化行为的影响[J].中国有色金属学报,2014,24(11):2769.
X Xiao,L Xu,X Z Qin,J S Hou,C S Wang,J T Guo,L Z Zhou. Effect of elements Y and Ce on high temperature oxidation behavior of directionally-solidified Ni-based superalloy[J].The Chinese Journal of Nonferrous Metals,2014,24(11):2769.
[40]李晓丽.稀土Y对GH3535高温合金微观结构和抗高温腐蚀性能的影响[D].上海:中国科学院研究生院,2015. 1.
X L Li. The Effect of Yttrium on Microstructure and High-Temperature Corrosion Resistance of GH3535 Superalloy[D]. Shanghai:Shanghai Institute of Applied Physics,2015. 1.
[41]陈石富,马惠萍,鞠泉,赵光普.稀土元素La对GH230合金1000℃抗氧化性能的影响[J].钢铁研究学报,2009,21(11):45.
S F Chen,H J Ma,Q Ju,G P Zhao. Effect of rare earth element lanthanum on oxidation behavior of GH230 at 1000 ℃ in air[J].Journal of Iron and Steel Research,2009,21(11):45.
[42]Bai J Y,Wu J H,Xu S H,Pei Y L,Qin L,Li S S,Gong S K. Effects of Ce and Dy on the cyclic oxidation behavior of a Ni-based single crystal superalloy[A]. High Performance Structural Materials:Proceedings of Chinese Materials Conference 2017 18th [C]. Singapore:Springer,2018. 803.
[43]尚根峰,廖金发,汪航.Y-La添加对镍基单晶高温合金界面反应及循环氧化行为的影响[J].航空材料学报,2018,38(6):43.
G F Shang,J F Liao,H Wang. Effect of Y-La addition on interfacial reaction and cyclic oxidation behavior of nickel-based single crystal superalloy[J].Journal of Aeronautical Materials,2018,38(6):43.
[44]尚根峰. 含稀土、钙元素的镍基单晶高温合金与铸型界面反应研究及氧化行为评价[D].赣州:江西理工大学,2018. 1.
G F Shang. Study on Interfacial Reaction between Nickel Based Single Crystal Superalloys Containing Rare Earth and Calcium and Its Mold and Evaluation of Oxidation Behavior[D]. Ganzhou:Jiangxi University of Science and Technology,2018. 1.
[45]Ding M Q,Hu P,Ru Y,Zhao W Y,Pei Y L,Li S S,Gong S K. Effects of rare-earth elements on the oxidation behavior of γ-Ni in Ni-based single crystal superalloys:a first-principles study from a perspective of surface adsorption[J].Applied Surface Science,2021,547:149173.
[46]Pei H Q,Wen Z X,Zhang Y M,Yue Z F. Oxidation behavior and mechanism of a Ni-based single crystal superalloy with single α-Al2O3 film at 1000 ℃[J].Applied Surface Science,2017,411:124.
[47]Dye D,Ma A,Reed R C. Numerical modelling of creep deformation in a CMSX-4 single crystal superalloy turbine blade[J].Superalloys,2008,911:919.
[48]Pei H Q,Li M,Wang P,Yao X H,Wen Z X,Yue Z F. The effect of tensile stress on oxidation behavior of nickel-base single crystal superalloy[J].Corrosion Science,2021,191:109737.
[49]Yuan F H,Han E H,Jo C Y,Li T F,Hu Z Q. The effect of crystallographic orientation on the oxidation behavior of a single-crystal nickel-base superalloy[J].Oxidation of Metals,2003,60:211.
[50]Latief F,Kakehi K,Fu X. Influence of surface orientation on oxidation resistance of Ni-based single crystal superalloy CM186LC at 1100 ℃ in air[J].International Journal of Electrochemical Science,2012,7:7608.
[51]Latief F,Alrasheedi N. Anisotropic oxidation resistance in a Ni-base single crystal superalloy[J].International Journal of Electrochemical Science,2015,10:2183.
[52]Wu Q,Li S S,Ma Y,Gong S K. Comparison of O adsorption on Ni3Al (001),(011),and (111) surfaces through first-principles calculations[J].Physica B:Condensed Matter,2012,407(12):2321.
[53]Wang X,Szpunar J A,Zhang L. Effect of surface crystallographic orientation on the oxidation behavior of Ni-based alloy[J].Applied Surface Science,2015,327:532.
[54]Nowak W J,Siemek K,Ochał K,Kościelniak B,Wierzba B. Consequences of different mechanical surface preparation of Ni-base alloys during high temperature oxidation[J].Materials,2020,13(16):3529.
[55]朱亚威.表面处理状态对DD6镍基单晶合金氧化行为的影响[D].大连:大连理工大学,2018. 1.
Y W Zhu. Effect of Surface Treatment Condition on Oxidation Behavior of DD6 Ni-based Single Crystal Superalloy[D]. Dalian:Dalian University of Technology,2018. 1.
[56]Pei H Q,Wen Z X,Li Z W,Zhang Y M,Yue Z F. Influence of surface roughness on the oxidation behavior of a Ni-4.0Cr-5.7Al single crystal superalloy[J].Applied Surface Science,2018,440:790.
[57]Wagner C. Measurement of oxidation rate of metal[J].Journal of The Electrochemical Society,1959,63:772.
[58]Nowak W J,Serafin D,Wierzba B. Effect of surface mechanical treatment on the oxidation behavior of FeAl-model alloy[J].Journal of Materials Science,2019,54:9185.
Basic Information:
DOI:10.13373/j.cnki.cjrm.XY23030015
Chinese Library Classification Number:TG146.1+5
Citation Information:
Nickel-based single crystal superalloys have become increasingly important in the manufacturing of aircraft engines and gas turbine blades due to their superior mechanical properties,including excellent high-temperature strength and superior fatigue resistance. However,these alloys suffer from the problem of high-temperature oxidation,which can significantly shorten their service life. In order to improve the oxidation resistance and prolong the service life,it is necessary to have a comprehensive understanding of their oxidation behavior. The oxidation kinetics of nickel-based single crystal superalloys can be divided into three stages:the first stage,where the oxidation follows the parabolic law controlled by diffusion;the second stage,where the oxidation rate decreases significantly due to the formation of a continuous dense alumina layer;and the third stage,where the thickness of the oxide film reaches a critical value and detachment occurs,which accelerates the oxidation rate. The oxidation kinetics of different alloys may differ due to the influence of factors such as element content and oxidation temperature. The oxidation kinetics curve exhibits a parabolic law,subparabolic law,and cubic law,and different oxidation stages show different oxidation laws due to changes in the oxide layer (whether a dense alumina layer is formed). The oxide film of nickel-based single crystal superalloys can be divided into three layers:the outer layer of nickel oxide,the middle layer of spinel,and the inner layer of dense alumina. After a period of oxidation,γ′ phase in the matrix can be transformed into γ′ phase at the inner side of alumina film due to the depletion of Al element,forming γ′-free zone. After long-term oxidation,the thickening of the oxide film leads to the peeling of the oxide layer,leaving a large area of γ′-free zone. During the initial oxidation process,the dislocation generated by lattice mismatch can aggregate in the two phases to form a dislocation network,providing a channel for oxygen atoms to diffuse inward. Moreover,the oxidation behavior of nickel-based single crystal superalloys is affected by many factors. First,the element content of the alloy,such as Al,Cr,Si,Hf,and rare earth elements can improve its antioxidation performance of the alloy,while S,Ti,Ru,and other elements have the opposite effect. In addition,the segregation during the solidification process of the alloy can cause inconsistent oxidation behavior between dendrites and intradendritic regions. Specifically,the initial oxidation product between dendrites is mainly aluminum oxide,while the intradendritic region is mainly nickel oxide. In the long-term oxidation process,the alumina layer in the intradendritic region undergoes a process of changing from continuous dense to fragmented and dispersed,while those in the interdendritic region always remains continuous until detachment. Different oxidation conditions also affect the oxidation behavior:as the temperature increases,the oxidation rate of the alloy accelerates,and the thickness of the oxide layer also increases. When loaded applied,the dislocations in the γ matrix increase and aggregate at the interface of γ and γ′ phases,accelerating the outward diffusion rate of Al elements and causing the growth of the oxide layer to accelerate. The oxidation behavior also show anisotropy,specifically,the oxidation resistance of (100) surface is worse than that of (110) surface. This difference may be attributed to the distinct growth structures of oxide on various oriented surfaces,leading to different numbers of short-circuit diffusion paths on the surface,or may be caused by varying diffusion path lengths at the two-phase interfaces in different orientations. The differences in antioxidant properties can also be explained from the perspective of atomic adsorption. First-principles calculations show that different oriented surfaces have different adsorption capacities for oxygen atoms,which lead to the anisotropy of oxidation. The higher the surface roughness is,the more dislocations and defects are near the surface. These defects provide outward diffusion channels for Al ions,rapidly generate a dense alumina layer and improve the antioxidation performance of the alloy. In the future,research on the oxidation of single crystal superalloys can be carried out from the following directions: (1) Utilize in-situ oxidation technology with longer coverage time,more accurate stress-temperature control,and finer observation to establish a more precise oxidation model. (2) Use more high-precision instruments to characterize trace rare earth elements and explore its modification mechanism deeply to achieve precise and efficient doping of rare earth elements. (3) Carry out the research on the multi-factor synergy,coupling two or more conditions to study the oxidation behavior of alloys closest to actual service environment,thus establishing an oxidation model more in line with real situations. (4) Conduct research on the influence of oxidation behavior on alloy creep/fatigue fracture behavior. In-depth study of the relationship between oxidation and mechanical performance such as creep and fatigue are helpful to deepen the understanding of material deformation and failure behavior and improve the service life of components.
quote
| GB/T 7714-2015 | [1] Hongci Yang, Jiangkun Fan, Yuelin Song, et al. Research Status and Prospect of Oxidation Behavior of Nickel-Based Single Crystal Superalloys[J]. Chinese Journal of Rare Metals, 2024, 48(9): 1274-1291. DOI:10.13373/j.cnki.cjrm.XY23030015. |
| MLA | [1] Hongci Yang, et al., "Research Status and Prospect of Oxidation Behavior of Nickel-Based Single Crystal Superalloys." Chinese Journal of Rare Metals, vol. 48, no. 9, 2024, pp. 1274-1291, https://doi.org/10.13373/j.cnki.cjrm.XY23030015. |
| APA | [1] Hongci Yang, Jiangkun Fan, Yuelin Song, Jiayu Li, Jianbo Yu, Lilong Zhu, Zihui Cheng, Yingxin Zhang, & Jinshan Li. (2024). Research Status and Prospect of Oxidation Behavior of Nickel-Based Single Crystal Superalloys. Chinese Journal of Rare Metals, 48(9), 1274-1291. https://doi.org/10.13373/j.cnki.cjrm.XY23030015 |
| IEEE | [1] Hongci Yang, Jiangkun Fan, Yuelin Song, Jiayu Li, Jianbo Yu, Lilong Zhu, Zihui Cheng, Yingxin Zhang, and Jinshan Li, "Research Status and Prospect of Oxidation Behavior of Nickel-Based Single Crystal Superalloys," Chinese Journal of Rare Metals, vol. 48, no. 9, pp. 1274-1291, 2024, doi: 10.13373/j.cnki.cjrm.XY23030015. keywords: {nickel-based single crystal superalloy;;high-temperature oxidation;;element diffusion;;anisotropy} |
