daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Long-Lasting Superhydrophilic Polymers via Multiscale Topographies AITranslate

Singapore University of Technology and Design; Singapore University of Technology and Design
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The challenge in achieving extreme wetting (<10° contact angle) in engineering polymer surfaces lies in the balance between water-loving chemical compositions and the degrading effects of absorbed water on physical, thermal, and mechanical properties. Hydrophobic recovery caused by surface energy minimization and surface polymer chain relaxation also contributes to the challenges in achieving stable extreme wetting in thermoplastic polymers. In this report, multiscale topography consisting of random nanoporous structure and uniform micropattern presents an extended capillary network to achieve superwetting on thermoplastic polymers. The topography that results in a buried pore structure achieves two design objectives: (1) an extended surface area that is shielded from surface contamination by the small pore size and tortuous path into the coating thickness and (2) an extended path for wicking of liquid into the coating to achieve long-lasting superhydrophilic performance. Nanoporous poly(methyl methacrylate) (PMMA) coatings on microtextured substrates exhibit superhydrophilic performance through a two-phase contact angle decline. Nanoporous PMMA on 1 μm grating and 500 nm pillar arrays yielded the best and most robust superhydrophilic wetting with a measured water contact angle of near 0°, a complete spreading state over a test period of 48 h and over multiple rewetting tests.

KeyWords AITranslate

superhydrophilic thermoplastic polymers multiscale nanopores micropatterns
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.0c01056

Chinese Library Classification Number:

Citation Information:

The challenge in achieving extreme wetting (<10° contact angle) in engineering polymer surfaces lies in the balance between water-loving chemical compositions and the degrading effects of absorbed water on physical, thermal, and mechanical properties. Hydrophobic recovery caused by surface energy minimization and surface polymer chain relaxation also contributes to the challenges in achieving stable extreme wetting in thermoplastic polymers. In this report, multiscale topography consisting of random nanoporous structure and uniform micropattern presents an extended capillary network to achieve superwetting on thermoplastic polymers. The topography that results in a buried pore structure achieves two design objectives: (1) an extended surface area that is shielded from surface contamination by the small pore size and tortuous path into the coating thickness and (2) an extended path for wicking of liquid into the coating to achieve long-lasting superhydrophilic performance. Nanoporous poly(methyl methacrylate) (PMMA) coatings on microtextured substrates exhibit superhydrophilic performance through a two-phase contact angle decline. Nanoporous PMMA on 1 μm grating and 500 nm pillar arrays yielded the best and most robust superhydrophilic wetting with a measured water contact angle of near 0°, a complete spreading state over a test period of 48 h and over multiple rewetting tests.

quote

GB/T 7714-2015 [1] Jarrett Jonathan Dumond, Hong Yee Low. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.0c01056.
MLA [1] Jarrett Jonathan Dumond, and Hong Yee Low. ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.0c01056.
APA [1] Jarrett Jonathan Dumond, & Hong Yee Low. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.0c01056
IEEE [1] Jarrett Jonathan Dumond and Hong Yee Low, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.0c01056. keywords: {superhydrophilic;thermoplastic polymers;multiscale;nanopores;micropatterns}