Influence of Total Gas Flow on Surface Morphology and Mechanical Properties of TiN Coatings Deposited by Multi-arc Ion Plating AITranslate
Abstract AITranslate
TiN coatings were deposited on the surface of cemented carbide substrate by multi-arc ion plating. The effect was studied of total gas flow on the surface morphology and mechanical properties of TiN coatings. The surface morphology of the coatings was observed by SEM. The pixel distribution of the coat- ings was analyzed by ImageJ software. And the mechanical properties of TiN coatings were evaluated by automatic scratch spectrometer and nanoindenter. The results show that with total gas flow increasing, both the amount and size of microparticles on coating surface increase, the adhesion force of the coatings in- creases firstly and then decreases, but its micro-hardness decreases firstly and then increases. When the total gas flow is 300 mL/min,the coatings have the most gas pits and the highest adhesion force of 106.4 N. When the total gas flow is 100 mL/min,the coatings have the highest micro-hardness of HV3 021.
KeyWords AITranslate
1张会霞,战宏伟.Ti_(0.33)Al_(0.67)N复合梯度膜层的高温抗氧化性能[J].有色金属工程,2013,3(1):18-20. 被引量：3
2王宝友,崔丽华.涂层刀具的涂层材料、涂层方法及发展方向[J].机械,2002,29(4):63-65. 被引量：30
3KALSS W,REITER A,DERFLINGER V,et al. Modern coatings in high performance cutting applications[J]. In- ternational Journal of Refractory Metals and Hard Mate- rials,2006,24(5) :399-404.
4KLOCKE F,KRIEG T, GERSCHWILER K, et al. Im- proved cutting processes with adapted coating systems[J]. CIRP Annals--Manufacturing Technology, 1998,47 (1) ..65-68.
5HEDENQVIST P,OLSSON M,WALLEN P,et al. How TiN coatings improve the performance of high speed steel cutting tools[J]. Surface and Coatings Technology, 1990,41 (2) : 243-256.
6马捷,李辉,张永志,魏建忠,张姗.缠绕钨丝CVD钨管的组织及性能[J].中国表面工程,2012,25(3):63-67. 被引量：4
7李思思,马捷,贾平平,魏建忠.AZ31镁合金表面化学气相沉积钨涂层工艺及其耐蚀性和耐磨性[J].中国表面工程,2014,27(1):40-44. 被引量：9
8AN Q L, WANG C Y, XU J Y, et al. Experimental in- vestigation on hard milling of high strength steel using PVD-A1TiN coated cemented carbide tool[J]. Interna- tional Journal of Refractory Metals and Hard Materials, 2014,43(3) :94-101.
9LI H T,WANG Q,ZHUANG M H,et al. Characteriza- tion and residual stress analysis of TiN/TiCN films on AZ31 magnesium alloy by PVD[J]. Vacuum, 2015, 112:66-69.
10KIM K H, HAND S,KIM S K. Adhesion properties of arc ion-plated TiN coatings with WC particle size,Co content and surface roughness[J]. Surface and Coating Technology, 2003,163/164 : 605-610.
1侯翔,王铁钢,刘源,张姣姣,朱强.电弧离子镀TiN涂层沉积工艺研究[J].装备环境工程,2019,16(5):72-77. 被引量：12
2许建平,王国星,王佳杰,王春艳,尹志娟,王瑶,陈晶.多弧离子镀TiN涂层高温氧化特性[J].焊接技术,2020,49(11):14-16. 被引量：6
1王槐乾,姜宏伟,王方标,黄海亮,左桂鸿,王丹,郑友进.工艺参数对磁控溅射TiN膜结构的影响[J].电镀与精饰,2019,41(12):20-24. 被引量：6
2付庆琳,吴安如,杜文豪,郭伟健.金属材料表面强化技术应用现状与展望[J].湖南工程学院学报：自然科学版,2020,30(2):52-56. 被引量：1
3吕亮,林松盛,王迪,刘灵云,汪唯,郭朝乾,代明江,汪云程.钛合金基材表面粗糙度对Ti/TiN/Zr/ZrN多层膜性能的影响[J].电镀与涂饰,2020,39(15):979-983.
4王铁钢,张雅倩.磁控溅射工艺控制模式对Cr(Mo)N涂层的影响[J].天津职业技术师范大学学报,2020,30(3):1-8.
5许建平,王国星,王佳杰,王春艳,尹志娟,王瑶,陈晶.多弧离子镀TiN涂层高温氧化特性[J].焊接技术,2020,49(11):14-16. 被引量：6
6刘艳梅,王铁钢,郭玉垚,柯培玲,蒙德强,张纪福.Ti-B-N纳米复合涂层的设计、制备及性能[J].金属学报,2020,56(11):1521-1529. 被引量：1
7彭立静,张钧,徐晨宁,王晓阳,王美涵.N/Ti原子比对TiN膜微结构及性能的影响综合分析[J].材料保护,2021,54(4):127-132.
8王金磊,朱丽慧.TiN/MT-TiCN/Al_(2)O_(3)/ZrCN多层涂层的热稳定性能研究[J].硬质合金,2021,38(2):73-80. 被引量：1
9王梦婷,王进,王勇强,马大衍,李浩,柳琪.退火处理对CrAlN硬质涂层组织结构与力学性能的影响[J].铸造技术,2021,42(9):811-815.
10汪世广,何卫锋,黄达,李才智,蔡振兵,王学德,张一豪.陶瓷-金属多层涂层不同温度循环冲击损伤特征与演化规律[J].表面技术,2022,51(1):60-68. 被引量：1
1陈昌浩,金永中,刘东亮,余学金.负偏压对多弧离子镀TiN涂层大颗粒形貌及像素分布的影响[J].表面技术,2015,44(11):29-34. 被引量：4
2王福贞,唐希源,周友苏,万春萍,斐显英.多弧离子渗金属[J].金属热处理,1992(4):3-7. 被引量：8
3戴燕燕.花键轴塑性成形工艺专利技术综述[J].山东工业技术,2016(9):51-51. 被引量：3
4余小琴,任伟,冷光荣,王华,马鹏,张邹华.冷轧电工钢孔洞缺陷的研究与分析[J].江西冶金,2015,35(3):8-10. 被引量：1
5王豫,陈伟.W18Cr4V高速钢基体的TiN化学气相沉积[J].金属热处理,2004,29(5):8-11.
6郑贺,陈仁德,杨巍,柯培玲,汪爱英.空气与C3H8含量对气体氧-氮-碳三元共渗化合物层结构的影响[J].热加工工艺,2013,42(10):145-147.
7吴玉广,陈福砦.离子镀膜中的弧电流对膜层质量的影响[J].真空科学与技术,1999,19(5):392-394. 被引量：4
8常铁锤.国内螺旋焊管不剪边生产工艺发展状况[J].焊管,2006,29(3):33-34. 被引量：3
9周运洪,赵海斌,宋虎,涂远洋.铸造模拟软件在生产中的应用实例[J].金属加工：热加工,2015,0(1):88-89. 被引量：1
10刘静安.提高挤压工模具使用寿命的主要途径[J].轻合金加工技术,1996,24(12):2-5. 被引量：5
Basic Information:
DOI：
Chinese Library Classification Number:TG711[金属学及工艺—刀具与模具]
Citation Information:
TiN coatings were deposited on the surface of cemented carbide substrate by multi-arc ion plating. The effect was studied of total gas flow on the surface morphology and mechanical properties of TiN coatings. The surface morphology of the coatings was observed by SEM. The pixel distribution of the coat- ings was analyzed by ImageJ software. And the mechanical properties of TiN coatings were evaluated by automatic scratch spectrometer and nanoindenter. The results show that with total gas flow increasing, both the amount and size of microparticles on coating surface increase, the adhesion force of the coatings in- creases firstly and then decreases, but its micro-hardness decreases firstly and then increases. When the total gas flow is 300 mL/min,the coatings have the most gas pits and the highest adhesion force of 106.4 N. When the total gas flow is 100 mL/min,the coatings have the highest micro-hardness of HV3 021.
quote
| GB/T 7714-2015 | [1] CHEN Chang-hao, JIN Yong-zhong, LIU Dong-liang, et al. Influence of Total Gas Flow on Surface Morphology and Mechanical Properties of TiN Coatings Deposited by Multi-arc Ion Plating[J]. Rare Metals and Cemented Carbides, 2016(4): 43-47. |
| MLA | [1] CHEN Chang-hao, et al., "Influence of Total Gas Flow on Surface Morphology and Mechanical Properties of TiN Coatings Deposited by Multi-arc Ion Plating." Rare Metals and Cemented Carbides, no. 4, 2016, pp. 43-47. |
| APA | [1] CHEN Chang-hao, JIN Yong-zhong, LIU Dong-liang, & CAI Yu. (2016). Influence of Total Gas Flow on Surface Morphology and Mechanical Properties of TiN Coatings Deposited by Multi-arc Ion Plating. Rare Metals and Cemented Carbides(4), 43-47. |
| IEEE | [1] CHEN Chang-hao, JIN Yong-zhong, LIU Dong-liang, and CAI Yu, "Influence of Total Gas Flow on Surface Morphology and Mechanical Properties of TiN Coatings Deposited by Multi-arc Ion Plating," Rare Metals and Cemented Carbides, no. 4, pp. 43-47, 2016. keywords: {TiN coating;multi-arc ion plating;total gas flow;surface morphology;mechanical property} |