Hydrogenation Stripping Recovery of Niobium Layer and Tantalum Layer in Niobium/Steel and Tantalum/Titanium/Steel Layered Composites AITranslate
Abstract AITranslate
The recovery of the niobium layer and tantalum layer from waste niobium/steel and tantalum/titanium/steel by hydrogenation stripping was studied.The results show that the hydrogenation temperature and hydrogenation time have a great impact on the stripping of the composite layer.Among them, the best stripping conditions for the niobium/steel layered composite are the hydrogenation temperature of 800 ℃ and hydrogenation time of 1.0 h, and the content of the impurity element Fe in the niobium hydride block which is obtained by stripping is about 0.007 8%.The best stripping conditions for the tantalum/titanium/steel layered composite are the hydrogenation temperature of 600 ℃ and hydrogenation time of 1.5 h, and the content of the impurity element Ti in the obtained tantalum hydride block is about 0.127%.
KeyWords AITranslate
1周洪强,陈志强.钛及钛合金粉末的制备现状[J].稀有金属快报,2005,24(12):11-16. 被引量：22
2洪艳,曲涛,沈化森,王兆林,车小奎.氢化脱氢法制备钛粉工艺研究[J].稀有金属,2007,31(3):311-315. 被引量：23
3吴赫,淮鑫斌,韩张雄,李力争.电感耦合等离子体-质谱法测定地球化学样品中的铌和钽[J].光谱实验室,2013,30(5):2452-2456. 被引量：6
4马永辉.金属中气体元素对材料性能的影响及检测[J].电子制作,2014,22(16):255-255. 被引量：1
5毛辉,贺旭明,叶建林,巨建辉,党战伟.化工设备中铌代替钽的可行性分析[J].石油化工设备,2012,41(4):46-49. 被引量：3
6路洪洲,赵岩,冯毅,马鸣图,边箭,刘永刚,郭爱民.微合金化热成形钢开发应用进展及展望[J].机械工程材料,2020,44(12):1-10. 被引量：16
7张炎,王再友,查光成.热处理对钽板组织和力学性能的影响[J].热加工工艺,2011,40(24):218-221. 被引量：2
8韩晨,孙付涛.钽铌板带生产与应用分析[J].有色金属加工,2017,46(5):7-12. 被引量：2
9高鹏,张珊,贲留斌,赵文武,刘中柱,RIBAS Rogerio,朱永明,黄学杰.铌元素在锂离子电池中的应用[J].储能科学与技术,2020,9(5):1443-1453. 被引量：3
Basic Information:
DOI：
Chinese Library Classification Number:TB331[一般工业技术—材料科学与工程]
Citation Information:
The recovery of the niobium layer and tantalum layer from waste niobium/steel and tantalum/titanium/steel by hydrogenation stripping was studied.The results show that the hydrogenation temperature and hydrogenation time have a great impact on the stripping of the composite layer.Among them, the best stripping conditions for the niobium/steel layered composite are the hydrogenation temperature of 800 ℃ and hydrogenation time of 1.0 h, and the content of the impurity element Fe in the niobium hydride block which is obtained by stripping is about 0.007 8%.The best stripping conditions for the tantalum/titanium/steel layered composite are the hydrogenation temperature of 600 ℃ and hydrogenation time of 1.5 h, and the content of the impurity element Ti in the obtained tantalum hydride block is about 0.127%.
quote
| GB/T 7714-2015 | [1] LIU Xin-li, SONG Xiao-yu, WANG De-zhi. Hydrogenation Stripping Recovery of Niobium Layer and Tantalum Layer in Niobium/Steel and Tantalum/Titanium/Steel Layered Composites[J]. Rare Metals and Cemented Carbides, 2022(6): 59-67. |
| MLA | [1] LIU Xin-li, et al., "Hydrogenation Stripping Recovery of Niobium Layer and Tantalum Layer in Niobium/Steel and Tantalum/Titanium/Steel Layered Composites." Rare Metals and Cemented Carbides, no. 6, 2022, pp. 59-67. |
| APA | [1] LIU Xin-li, SONG Xiao-yu, & WANG De-zhi. (2022). Hydrogenation Stripping Recovery of Niobium Layer and Tantalum Layer in Niobium/Steel and Tantalum/Titanium/Steel Layered Composites. Rare Metals and Cemented Carbides(6), 59-67. |
| IEEE | [1] LIU Xin-li, SONG Xiao-yu, and WANG De-zhi, "Hydrogenation Stripping Recovery of Niobium Layer and Tantalum Layer in Niobium/Steel and Tantalum/Titanium/Steel Layered Composites," Rare Metals and Cemented Carbides, no. 6, pp. 59-67, 2022. keywords: {layered composite;niobium/steel;tantalum/titanium/steel;hydrogenation stripping;recovery} |