Effects of Cyclic Heat Treatment on Mechanical Properties of 90W-7Ni-3Fe Tungsten Heavy Alloy AITranslate
Abstract AITranslate
The effects of cyclic heat treatment were investigated on the mechanical properties of the tung-sten heavy alloy 90W-TNi-3Fe. The results show that both the tensile strength and impact toughness of the alloy sample are improved significantly by cyclic heat treatment, while its elongation is reduced. The frac- ture of the alloy is observed by SEM,and then the influencing mechanism of cyclic heat treatment on alloy mechanical properties in argon atmosphere is discussed.
KeyWords AITranslate
1庞前列.高密度W-Ni-Fe合金的研究及发展[J].中国钨业,2000,15(4):34-36. 被引量：13
2胡兴军.高密度钨合金在弹用材料中的应用及研究进展[J].稀有金属与硬质合金,2009,37(3):65-67. 被引量：26
3黄劲松,周继承,刘文胜,黄伯云.高密度合金烧结后的热处理[J].金属热处理,2003,28(3):7-10. 被引量：4
4Noh J W,Kim E P, Song H S. Matrix penetration into W/W grain boundaries and its effect on W heavy alloy with various grain sizes during the cyclic heat treatment [J]. Metall Trans,1993,24A:2 411-2 416.
5German R M. Microstructure Limitations of high tung- sten content heavy alloys[A]. 11h international Plansee Seminar,85[C]. 长沙:中南工业大学钨钼材料研究室.1985.143-161.
1黄晓云.SPS循环次数对车曲轴用86W-12.5Ni-1.2Al-5.5Fe-1.5Al2O3钨合金组织及性能的影响[J].粉末冶金工业,2020,0(1):51-55.
2徐芳,邹东利,何立峰,肖大武,邱志聪.W-Ni-Fe合金微观组织与冲击性能研究[J].硬质合金,2014,31(2):72-76. 被引量：1
3李小强,刘波,黄冠翔,关模,胡可,屈盛官.SPS循环热处理对93W-4.9Ni-2.1Fe与95W-2.8Ni-1.2Fe-1Al_2O_3合金组织及性能的影响[J].中国有色金属学报,2018,28(11):2224-2232. 被引量：3
4邹树梁,颜亮,唐德文,谢宇鹏,张德.高密度W-Ni-Fe合金制备与应用研究进展[J].南华大学学报：自然科学版,2015,29(1):53-59. 被引量：3
5寸敏敏,陈文革,颜国君,张飞奇,高红梅.多次烧结对钨铜合金组织与性能的影响[J].粉末冶金技术,2017,35(4):243-248. 被引量：6
6高红梅,陈文革,连凯,张飞奇.晶粒尺寸与钨铜合金相关性的研究[J].稀有金属,2018,42(1):59-66. 被引量：6
7弓艳飞,高竹青,冯原,杨林,褚宏,林冰涛,孙晓霞.真空热处理对93W-5Ni-2Fe高比重合金力学性能的影响[J].材料热处理学报,2020,41(8):49-54. 被引量：2
1邓力群,邹树梁,唐德文.基于ProCAST研究冷却速率对新型铁基铸锭凝固过程的影响[J].中国铸造装备与技术,2016,51(4):43-48. 被引量：1
2李奎江,邹树梁,唐德文.核辐射屏蔽材料的研究进展及发展趋势[J].现代制造技术与装备,2017,53(8):178-178. 被引量：4
3石磊,董博,尹洪泉,梁凤敏,刘培源.电弧烧蚀对高压电器用铜钨合金组织和性能的影响[J].铸造技术,2018,39(8):1850-1852. 被引量：4
4黄昊,赵晶晶,韩翠柳,杨新宇,潘亚飞,张久兴.基于制备钨钼复合靶材的SPS烧结连接[J].材料工程,2020,48(3):84-91. 被引量：3
5董洪峰,林思聪.添加CeO2对W-6Ni-4Co合金组织与性能的影响研究[J].有色金属工程,2020,10(4):10-15.
6高建平,葛鹏.钨/环氧树脂辐射防护复合材料制备以及原位拉伸性能和微观组织演变[J].中国胶粘剂,2020,29(5):20-23. 被引量：1
7林冰涛,肖任勤,赵帅,张保红,徐吉路,孙晓霞.燃气舵用钨渗铜X射线探伤条纹显示分析[J].粉末冶金技术,2020,38(6):423-428. 被引量：2
8陈安琦,霍望图,董龙龙,陈文革,周悦.先进铜钨复合材料研究进展[J].中国材料进展,2021,40(2):152-160. 被引量：4
9孙晓霞,马丁,李煦,李明,裴晓霞,李昕东,马诗童.固溶处理对ZG40Cr25Ni20Si2耐热钢力学性能的影响[J].兵器装备工程学报,2021,42(2):211-215. 被引量：2
10王新刚,赵冲,陈鑫,赵璐,张信哲,彭付申.W-Cu20合金热变形行为及其力学性能的研究[J].稀有金属,2021,45(4):385-392. 被引量：2
1刘艳改,熊守美,黄朝晖,房明浩,袁建路.合金元素对AM60B镁合金性能的影响[J].材料科学与工艺,2008,16(4):511-514. 被引量：8
2渡边健彦,张玉奎.用银基钎料在氩气氛中钎焊钛[J].有色金属与稀土应用,1998(1):21-28.
3Mn-30Cu(原子百分比)合金的阻尼性能[J].金属功能材料,2006,13(5):44-44.
4丁建国,荣福杰.改造的铸造铝合金试样切割机[J].机械工人：热加工,2005,29(12):71-72.
5彭文屹,吴晓春,闵永安,许珞萍.氩气氛离子渗氮提高H13钢热疲劳性能[J].模具工业,2008,34(1):69-74. 被引量：5
6Clayton Andre de Oliveira Motta,Jose de Souza,Marcelo Salvador Coser,Alex Fabiano Bueno,Lirio Schaeffer,Bernardo Poras Reis,Hamudy Munir Abou Arabi,Lucas Soares de Almeida.Analysis of the Mechanical Properties of the Sintered Composite FeCuC in Two Different Atmospheres[J].机械工程与自动化：英文版,2015,5(1):33-38.
7张青辉,谭静,郑天群,黄维刚.铝含量对Mg-Al-Zn-Si-Sb-RE合金的组织和强度与塑性的影响[J].四川冶金,2007,29(3):11-12. 被引量：1
8王文焱,黄文君,邵昌,张豪胤,史士钦,谢敬佩,黄亚波,刘冀尧.添加Nd元素对Ti-6Al-4V-2Cr合金组织细化的影响[J].粉末冶金材料科学与工程,2016,21(5):760-766. 被引量：2
9江庆,时凯华,董凯林,周科朝.球磨时间对WC-6%Ni硬质合金微观结构及性能的影响[J].硬质合金,2013,30(3):134-140. 被引量：3
10刘富,张修庆,邓鉴棋,赵祖欣,叶以富.铬含量对ECAP铜铬合金组织和显微硬度的影响[J].热加工工艺,2008,37(22):16-19. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TG166.7[金属学及工艺—热处理]
Citation Information:
The effects of cyclic heat treatment were investigated on the mechanical properties of the tung-sten heavy alloy 90W-TNi-3Fe. The results show that both the tensile strength and impact toughness of the alloy sample are improved significantly by cyclic heat treatment, while its elongation is reduced. The frac- ture of the alloy is observed by SEM,and then the influencing mechanism of cyclic heat treatment on alloy mechanical properties in argon atmosphere is discussed.
quote
| GB/T 7714-2015 | [1] ZHANG Jun, LUO Zhen-zhong, CHEN Jian-xiong. Effects of Cyclic Heat Treatment on Mechanical Properties of 90W-7Ni-3Fe Tungsten Heavy Alloy[J]. Rare Metals and Cemented Carbides, 2013(2): 58-60. |
| MLA | [1] ZHANG Jun, et al., "Effects of Cyclic Heat Treatment on Mechanical Properties of 90W-7Ni-3Fe Tungsten Heavy Alloy." Rare Metals and Cemented Carbides, no. 2, 2013, pp. 58-60. |
| APA | [1] ZHANG Jun, LUO Zhen-zhong, & CHEN Jian-xiong. (2013). Effects of Cyclic Heat Treatment on Mechanical Properties of 90W-7Ni-3Fe Tungsten Heavy Alloy. Rare Metals and Cemented Carbides(2), 58-60. |
| IEEE | [1] ZHANG Jun, LUO Zhen-zhong, and CHEN Jian-xiong, "Effects of Cyclic Heat Treatment on Mechanical Properties of 90W-7Ni-3Fe Tungsten Heavy Alloy," Rare Metals and Cemented Carbides, no. 2, pp. 58-60, 2013. keywords: {90W-7Ni-3Fe;tungsten heavy alloy;cyclic heat treatment;mechanical property} |