daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Low-cost Preparation and Characterization of Gd-Yb-YSZ Thermal Barrier Coating AITranslate

School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing
1
0
0
0
8
3.China;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing
1
0
0
0
8
3.China;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing
1
0
0
0
8
3.China;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing
1
0
0
0
8
3.China;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing
1
0
0
0
8
3.China
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Gd-Yb-YSZ ceramic powder was synthesized with hydrothermal method and carbon spheres were used as the template.The synthetic ceramic powder was coated on the surface of GH4169 superalloy block with commercial ceramic binder,and then subjected to drying and heat treatment to obtain thermal barrier coating.The prepared Gd-Yb-YSZ coating can resist thermal shock for 25 cycles,and its adhesive strength is 32 MPa,higher than that of the YSZ coating prepared by plasma spraying.The average thickness of YSZ coating obtained by plasma spraying is 270 μm.The average thickness of the homemade Gd-Yb-YSZ coating is only 68 μm,but its insulation temperature is 15 ℃ higher than that of the above YSZ coating.The main phase of the Gd-Yb-YSZ coating is Yb0.5Zr0.5O1.75,meaning that the Yb element is likely to be incorporated into the ZrO2 crystal structure,while the Gd element exists as a separate GdO2 phase.Therefore,the improvement in the thermal insulation capacity of the Gd-Yb-YSZ coating may be caused by the incorporation of Yb.

KeyWords AITranslate

thermal barrier coating Gd-Yb-YSZ coating low-cost preparation insulation temperature adhesive strength thermal shock resistance

1郭洪波,宫声凯,徐惠彬.先进航空发动机热障涂层技术研究进展[J].中国材料进展,2009,28(9):18-26. 被引量:130

2张丹华,王璐,郭洪波,宫声凯.多元稀土氧化物掺杂二氧化锆基陶瓷材料的热物理性能[J].复合材料学报,2011,28(2):179-184. 被引量:16

3冀晓鹃,宫声凯,徐惠彬,刘福顺.添加稀土元素对热障涂层YSZ陶瓷层晶格畸变的影响[J].航空学报,2007,28(1):196-200. 被引量:24

4郑蕾,郭洪波,郭磊,彭徽,宫声凯,徐惠彬.新一代超高温热障涂层研究[J].航空材料学报,2012,32(6):14-24. 被引量:59

5牟仁德,陆峰,何利民,贺世美,黄光宏.热障涂层技术在航空发动机上的应用与发展[J].热喷涂技术,2009,1(1):53-58. 被引量:30

6郭金磊,沈少波,赵颖石,季益龙,张智涛.水热法制备ZrO2空心球的实验研究[J].稀有金属与硬质合金,2017,45(2):55-59. 被引量:3

7张智涛,张帅,侯玉婷,颜世宇,沈少波.亚微米Gd-Sc-YSZ空心球粉常温电泳沉积于高温合金表面制备热障涂层[J].材料研究与应用,2017,11(4):224-229. 被引量:2

8朱晨,于建海,郭亚飞,丁坤英.航空发动机热障涂层存在的问题及其发展方向[J].表面技术,2016,45(1):13-19. 被引量:33

9张小锋,周克崧,刘敏,邓春明,邓畅光,陈焕涛.镀铝表面改性7YSZ纳米热障涂层热震性能分析[J].无机材料学报,2017,32(9):973-979. 被引量:7

1唐健江,白宇,王政.高温热循环对不同结构YSZ涂层隔热性能的影响[J].热加工工艺,2019,48(20):114-118. 被引量:4

2姚瑶,高杰.全瓷修复材料及粘接技术研究进展[J].陕西医学杂志,2019,48(10):1406-1408. 被引量:2

3顾振杰,雷剑波,窦俊雅,郭津博.等离子喷涂-激光熔覆CoCrTaAlY/YSZ热障涂层的抗高温氧化机理及热震性能[J].中国激光,2019,46(8):118-124. 被引量:2

4汪瑞军,鲍曼雨,马小斌.一种阻燃隔热复合功能涂层性能研究[J].热喷涂技术,2019,11(1):77-81. 被引量:4

5胡伟达,邹毓,高颖,邓港,杨光美,聂明展.TiO2/SiO2复合薄膜对玻璃透光和隔热性能的影响[J].包装学报,2019,11(3):52-57. 被引量:1

6戴建伟,牟仁德,王鑫,许振华,何利民.ZrO2掺杂对La2Ce2O7力学和热物理性能影响的研究[J].装备环境工程,2019,16(10):21-26. 被引量:2

7刘艳玲,唐健江,贾华,白宇,王俊文.纳米YSZ热障涂层中TGOs层的生长行为[J].金属热处理,2019,44(10):173-176. 被引量:1

8汪超,周鑫,解旭阳,张宏琦,何磊,曹学强.重型燃气轮机用La2(Zr0.7Ce0.3)2O7/YSZ双层热障涂层热循环性能研究[J].热喷涂技术,2019,11(3):14-21. 被引量:7

9杨光,陈松,丁会敏,王晓栋,周扬,赵娴.空心纳微米碳球的制备研究进展[J].化学工程师,2019,0(9):65-67.

10兰德省.秦俑一号坑出土陶俑修复粘接剂的筛选与应用研究[J].文物保护与考古科学,2019,31(5):49-59. 被引量:1

Basic Information:

DOI:

Chinese Library Classification Number:TB383[一般工业技术—材料科学与工程]

Citation Information:

Gd-Yb-YSZ ceramic powder was synthesized with hydrothermal method and carbon spheres were used as the template.The synthetic ceramic powder was coated on the surface of GH4169 superalloy block with commercial ceramic binder,and then subjected to drying and heat treatment to obtain thermal barrier coating.The prepared Gd-Yb-YSZ coating can resist thermal shock for 25 cycles,and its adhesive strength is 32 MPa,higher than that of the YSZ coating prepared by plasma spraying.The average thickness of YSZ coating obtained by plasma spraying is 270 μm.The average thickness of the homemade Gd-Yb-YSZ coating is only 68 μm,but its insulation temperature is 15 ℃ higher than that of the above YSZ coating.The main phase of the Gd-Yb-YSZ coating is Yb0.5Zr0.5O1.75,meaning that the Yb element is likely to be incorporated into the ZrO2 crystal structure,while the Gd element exists as a separate GdO2 phase.Therefore,the improvement in the thermal insulation capacity of the Gd-Yb-YSZ coating may be caused by the incorporation of Yb.

quote

GB/T 7714-2015 [1] ZHANG Shuai, TIAN Jin-long, KONG Qing-mao, et al. Low-cost Preparation and Characterization of Gd-Yb-YSZ Thermal Barrier Coating[J]. Rare Metals and Cemented Carbides, 2019(5): 43-48.
MLA [1] ZHANG Shuai, et al., "Low-cost Preparation and Characterization of Gd-Yb-YSZ Thermal Barrier Coating." Rare Metals and Cemented Carbides, no. 5, 2019, pp. 43-48.
APA [1] ZHANG Shuai, TIAN Jin-long, KONG Qing-mao, CHEN Yang, & SHEN Shao-bo. (2019). Low-cost Preparation and Characterization of Gd-Yb-YSZ Thermal Barrier Coating. Rare Metals and Cemented Carbides(5), 43-48.
IEEE [1] ZHANG Shuai, TIAN Jin-long, KONG Qing-mao, CHEN Yang, and SHEN Shao-bo, "Low-cost Preparation and Characterization of Gd-Yb-YSZ Thermal Barrier Coating," Rare Metals and Cemented Carbides, no. 5, pp. 43-48, 2019. keywords: {thermal barrier coating;Gd-Yb-YSZ coating;low-cost preparation;insulation temperature;adhesive strength;thermal shock resistance}