daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Fabrication and Characterization of Porous Poly(dimethylsiloxane) (PDMS) Adhesives AITranslate

Indian Institute of Technology Kanpur; Indian Institute of Technology Kanpur; Indian Institute of Technology Kanpur; Indian Institute of Technology Kanpur; Indian Institute of Technology Kanpur; Indian Institute of Technology Kanpur
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

In this study, we propose a simple low-cost emulsion-based method to fabricate porous poly(dimethylsiloxane) (PDMS) adhesive films, with a focus on their possible application as wound dressings. In this method, water is added to PDMS to form an emulsion. On film-casting the emulsion and curing it at 120 °C, evaporation of water droplets and PDMS cross-linking result in randomly distributed pores/voids in the bulk of the PDMS film. A huge advantage of the proposed method over conventional approaches is its simplicity owing to the use of water as a porogen. Two variants of the fabrication approach were considered: direct film-casting of emulsion and film-casting of the solvent-mediated emulsion with additional degassing. Films prepared using the first approach demonstrated that the bulk porosity induces significant roughness at their surface. Such films do not make good contact with the substrate, resulting in poor adhesion. Coating the films with a thin viscoelastic layer of PDMS, while retaining the bulk structure, improves the contact of the film with the substrate. These bi-layer films demonstrated remarkable enhancement in adhesion. The second approach involves adding ethyl acetate as a solvent and degassing the emulsion before film-casting, which results in a more controlled porosity and lower roughness at the surface. Compared to the porous films synthesized using the former protocol, these films have a relatively improved contact with the cover plate, resulting in enhanced adhesion. Lastly, through falling weight impact measurements, it was shown that the porous films, in comparison to their nonporous counterpart, were more effective in absorbing the accidental impact shock, which makes them potentially useful in healthcare applications.

KeyWords AITranslate

porous adhesives pressuresensitive adhesives peel test porous wound dressings shockabsorbing adhesives
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.0c00828

Chinese Library Classification Number:

Citation Information:

In this study, we propose a simple low-cost emulsion-based method to fabricate porous poly(dimethylsiloxane) (PDMS) adhesive films, with a focus on their possible application as wound dressings. In this method, water is added to PDMS to form an emulsion. On film-casting the emulsion and curing it at 120 °C, evaporation of water droplets and PDMS cross-linking result in randomly distributed pores/voids in the bulk of the PDMS film. A huge advantage of the proposed method over conventional approaches is its simplicity owing to the use of water as a porogen. Two variants of the fabrication approach were considered: direct film-casting of emulsion and film-casting of the solvent-mediated emulsion with additional degassing. Films prepared using the first approach demonstrated that the bulk porosity induces significant roughness at their surface. Such films do not make good contact with the substrate, resulting in poor adhesion. Coating the films with a thin viscoelastic layer of PDMS, while retaining the bulk structure, improves the contact of the film with the substrate. These bi-layer films demonstrated remarkable enhancement in adhesion. The second approach involves adding ethyl acetate as a solvent and degassing the emulsion before film-casting, which results in a more controlled porosity and lower roughness at the surface. Compared to the porous films synthesized using the former protocol, these films have a relatively improved contact with the cover plate, resulting in enhanced adhesion. Lastly, through falling weight impact measurements, it was shown that the porous films, in comparison to their nonporous counterpart, were more effective in absorbing the accidental impact shock, which makes them potentially useful in healthcare applications.

quote

GB/T 7714-2015 [1] Vinay Mohania, Tushar D. Deshpande, Yogesh R. G. Singh, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.0c00828.
MLA [1] Vinay Mohania, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.0c00828.
APA [1] Vinay Mohania, Tushar D. Deshpande, Yogesh R. G. Singh, Sandip Patil, Rahul Mangal, & Ashutosh Sharma. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.0c00828
IEEE [1] Vinay Mohania, Tushar D. Deshpande, Yogesh R. G. Singh, Sandip Patil, Rahul Mangal, and Ashutosh Sharma, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.0c00828. keywords: {porous adhesives;pressuresensitive adhesives;peel test;porous wound dressings;shockabsorbing adhesives}