Study on High Temperature Oxidation Resistance of Cr-coated Zirconium Alloy AITranslate
Abstract AITranslate
Cr metal layer of about 12μm thickness was prepared on zirconium alloy surface by multi-arc ion plating technology.Oxidation behavior and film adhesion strength to substrate of Cr-coated sample were investigated at 1 200℃ high temperature.The results from SEM analysis show that multi-arc ion plating layer has uniform thickness,smooth surface and clear film/substrate interface,and there are a large number of micro-holes and large particles on its surface.High temperature oxidation experimental results show that Cr-coated sample has obviously better high temperature oxidation resistance than the original zirconium alloy.There is a lot of Cr2O3 forming on the surface of the Cr-coated sample after oxidation at 1 200℃for 2 400 s,and its weight gain per unit area is only 12% of that of the original zirconium alloy.Scratch experimental results show that the critical load of Cr-coated sample is 18 N,and the bonding performance between the film and the substrate is excellent.
KeyWords AITranslate
1杨忠波,赵文金.锆合金耐腐蚀性能及氧化特性概述[J].材料导报,2010,24(17):120-125. 被引量：25
2王旭峰,李中奎,周军,田锋.锆合金在核工业中的应用及研究进展[J].热加工工艺,2012,41(2):71-74. 被引量：38
3王峰,王快社,马林生,张兵,孔亮,林兆霞.核级锆及锆合金研究状况及发展前景[J].兵器材料科学与工程,2012,35(1):107-110. 被引量：29
4瞿全炎,邱万奇,曾德长,刘正义.划痕法综合评定膜基结合力[J].真空科学与技术学报,2009(2):184-187. 被引量：38
5黄珂,杨伏良,陈力学,马凯,郭磊.划痕法测定TiAlN涂层结合强度的研究[J].表面技术,2013,42(5):107-111. 被引量：17
1王淑祥,白书欣,朱利安,叶益聪,王震,李顺,唐宇.核燃料包壳锆合金表面铬涂层研究进展[J].表面技术,2021,50(1):221-231. 被引量：4
2刘洋,赵亚欢,龚恒风,王占伟,廖业宏,任啟森.微量氧环境下热处理温度对Zr-1%Nb合金力学性能的影响[J].材料热处理学报,2021,42(3):89-93.
3王兴平,魏克俭,廖斌,关浩浩,陈琳,杜建成,徐驰,薛文斌.锆表面磁过滤阴极真空弧离子镀Cr涂层高温蒸汽氧化行为研究[J].稀有金属材料与工程,2021,50(5):1665-1672. 被引量：2
4肖珣,王亚强,张金钰,吴凯,刘刚,孙军.锆合金包壳表面金属Cr涂层的研究进展[J].中国材料进展,2022,41(6):445-457. 被引量：2
5杨振,樊湘芳,邱长军,李涛,刘艳红,王晓婧.锆合金表面镀Cr/TiAlN涂层的抗高温水蒸气氧化性能研究[J].真空科学与技术学报,2019,39(2):145-149. 被引量：4
1罗伟,潘东,王宇,曾波,覃炳朝,王均.磁控溅射TiAlN和TiAlSiN对Zr-Fe-Cr合金600℃腐蚀性能的影响[J].四川冶金,2020,42(5):10-14.
2郑勇,魏连峰,王晶,李洪玉,郑云西,齐振佳,白力文.SPD技术对锆及锆合金力学行为影响研究现状[J].钛工业进展,2021,38(1):45-48.
3王兴平,廖燚钊,关浩浩,高川力,朱明浩,金小越,徐驰,杜建成,薛文斌.锆表面微弧氧化膜1000~1200℃高温蒸汽氧化行为研究[J].表面技术,2021,50(6):23-31. 被引量：4
4苗利静,江柯敏,段北晨,孟凡平,卢焕明.X射线光电子能谱和聚焦离子束法研究FeCrAl合金元素含量对涂层抗氧化行为的影响[J].分析测试技术与仪器,2021,27(3):174-181.
5石刘洋,邱长军,刘豪.核燃料包壳锆合金表面吸氢开裂行为的研究进展[J].机械工程师,2022(3):47-48.
6黄贞普,陈勇,赵英泽.锆合金包壳表面抗氧化涂层研究进展[J].机械工程师,2022(4):38-40.
7杨红艳,陈寰,张瑞谦,韦天国,邱绍宇,彭小明.核电耐事故锆包壳表面涂层研究进展[J].表面技术,2022,51(7):87-97. 被引量：2
8王彦峰,王少鹏,耿娟娟,王毅飞,于耀华,张长伟.耐事故燃料组件用PVD高熵合金涂层研究进展[J].稀有金属材料与工程,2022,51(9):3524-3532. 被引量：1
9王淑祥,白书欣,朱利安,王震,叶益聪,万红,李顺,唐宇.氯化物体系熔盐电沉积铬涂层工艺[J].中国有色金属学报,2022,32(11):3419-3433.
10严亚伦,胡艺嵩,冯英杰.不同燃料包壳在高温高压水中的表面腐蚀产物沉积行为研究[J].核科学与工程,2022,42(6):1260-1267. 被引量：1
1龙琼,伍玉娇,凌敏,钟云波.稀土元素处理钢的研究进展及应用前景[J].炼钢,2018,34(1):57-64. 被引量：10
2庄蕾.TiB_2含量对AlMgB_(14)基复合材料抗高温氧化性能的影响[J].材料保护,2018,51(1):55-57. 被引量：1
3董卫萍,柳琪,王进,马大衍.热作模具钢CrTiAlSiN多元复合涂层的工业制备及性能研究[J].模具制造,2018,18(1):86-89. 被引量：2
4孙伟,宫秀敏,叶卫平,张覃铁,朱小清.三种材料多弧离子镀TiN涂层性能比较[J].电加工与模具,2000(1):31-33. 被引量：3
5杜伟,石倩,代明江,易健宏,林松盛,侯惠君.电弧离子镀NiCrAlYSi涂层抗高温氧化行为[J].中国表面工程,2018,31(1):81-87. 被引量：4
6周军,樊湘芳,丰振东,胡汝骞,李怀林.锆合金表面TiAlN和TiAlSiN涂层微观形貌和性能的研究[J].稀有金属与硬质合金,2017,45(6):66-70. 被引量：8
7杨德明,高阳,周起帆,蔡林.微观组织结构对NiCrAlY涂层抗高温氧化性能的影响[J].中国表面工程,2017,30(5):119-125. 被引量：7
8翟云霄,古一,黄璜,赵培新,黄继武,夏长清.Ta-10W/Ti的高温界面反应研究[J].材料导报,2016,30(24):103-107. 被引量：3
9陈平,史哲,剌颖乾,项欣.基于凹模压边区摩擦学性能的冲压仿真分析[J].中国表面工程,2018,31(1):59-66. 被引量：5
10杨珍,鲁金涛,张夏妮,赵新宝,袁勇,党莹樱,尹宏飞,谷月峰.水蒸气温度对700℃先进超超临界锅炉候选合金GH2984氧化行为的影响[J].材料工程,2018,46(1):74-82. 被引量：3
Basic Information:
DOI：
Chinese Library Classification Number:TG146.414[金属学及工艺—金属材料]
Citation Information:
Cr metal layer of about 12μm thickness was prepared on zirconium alloy surface by multi-arc ion plating technology.Oxidation behavior and film adhesion strength to substrate of Cr-coated sample were investigated at 1 200℃ high temperature.The results from SEM analysis show that multi-arc ion plating layer has uniform thickness,smooth surface and clear film/substrate interface,and there are a large number of micro-holes and large particles on its surface.High temperature oxidation experimental results show that Cr-coated sample has obviously better high temperature oxidation resistance than the original zirconium alloy.There is a lot of Cr2O3 forming on the surface of the Cr-coated sample after oxidation at 1 200℃for 2 400 s,and its weight gain per unit area is only 12% of that of the original zirconium alloy.Scratch experimental results show that the critical load of Cr-coated sample is 18 N,and the bonding performance between the film and the substrate is excellent.
quote
| GB/T 7714-2015 | [1] ZHANG Wen, QIU Zhang-jun, CENG Xiao-an, et al. Study on High Temperature Oxidation Resistance of Cr-coated Zirconium Alloy[J]. Rare Metals and Cemented Carbides, 2017(6): 71-75. |
| MLA | [1] ZHANG Wen, et al., "Study on High Temperature Oxidation Resistance of Cr-coated Zirconium Alloy." Rare Metals and Cemented Carbides, no. 6, 2017, pp. 71-75. |
| APA | [1] ZHANG Wen, QIU Zhang-jun, CENG Xiao-an, WANG Hao-ran, WANG Xiao-jing, LIU Yan-hong, & LI Huai-lin. (2017). Study on High Temperature Oxidation Resistance of Cr-coated Zirconium Alloy. Rare Metals and Cemented Carbides(6), 71-75. |
| IEEE | [1] ZHANG Wen, QIU Zhang-jun, CENG Xiao-an, WANG Hao-ran, WANG Xiao-jing, LIU Yan-hong, and LI Huai-lin, "Study on High Temperature Oxidation Resistance of Cr-coated Zirconium Alloy," Rare Metals and Cemented Carbides, no. 6, pp. 71-75, 2017. keywords: {zirconium ally;Cr film;multi-arc ion plating;high temperature oxidation resistance;film/substrate adhesion strength} |