Determination of Carbon Content in Beryllium by High-frequency Heating Infrared Absorption Spectrometry AITranslate
Abstract AITranslate
The factors affecting carbon determination in beryllium metal were studied by high-frequency heating infrared absorption spectrometry. The influences of fluxes on carbon release from beryllium powder were emphatically investigated such as tungsten and tin particles, and tungsten and copper particles. The results show that carbon can be completely released under the conditions of 100 mg beryllium powder sam- ple and 1.8 g tungsten and tin particles as the flux. When the carbon content in beryllium powder is 800μg/g,the relative standard deviation is less than 4. 0%, and the standard recovery of carbon is 980/00 102%.
KeyWords AITranslate
1墨尔尼克LM,等,金属中气体元素的测定[M].刘崇嗣,译.北京:冶金工业出版社,1987.
2冶金工业部科技情报标准研究所.锂和铍的冶金分析[M].北京:冶金工业出版社,1971.
3张庆波,李树华,刘丽,王烨.高频红外吸收法测定钛合金中的碳[J].光谱实验室,2004,0(5):992-995. 被引量：7
4文劲松,罗清泉.高频红外吸收法测定银中的碳硫[J].贵金属,2006,27(4):56-60. 被引量：4
1刘攀,唐伟,张斌彬,李治亚.高频感应燃烧-红外吸收光谱法在分析金属材料中碳、硫的应用[J].理化检验：化学分册,2016,52(1):109-118. 被引量：18
1刘攀,唐伟,张斌彬,李治亚.高频感应燃烧-红外吸收光谱法在测定无机非金属样品中碳、硫的应用[J].理化检验：化学分册,2016,52(4):487-496. 被引量：12
2刘丽娜,刘志民.高频红外法测定碳硫含量在两台碳硫分析仪的应用[J].现代科学仪器,2016,0(5):123-126.
3庄艾春.高频燃烧红外吸收法测定锡锌铅青铜中硫[J].冶金分析,2017,37(4):33-37. 被引量：3
4刘攀,杜米芳,唐伟,张斌彬,李治亚.无机固体样品中硫的测定方法的研究进展[J].理化检验：化学分册,2017,53(8):984-992. 被引量：7
5刘攀,唐伟.高频感应燃烧红外吸收法测定焊接药剂中硫含量[J].冶金分析,2017,37(11):64-68. 被引量：6
6王伟,刘欠,王莹,刘华龙,潘春秀.高温红外吸收光谱法测定煤、焦炭及煤焦油中的硫[J].广州化工,2017,45(22):93-95. 被引量：2
7魏春阳,曾静.高频红外碳硫分析仪对碳化硅质耐火材料中高含量碳化硅的测定[J].中国无机分析化学,2017,7(4):97-101. 被引量：3
8刘攀,杜米芳,唐伟,何鹏飞,董俊轩,张斌彬.无机固体样品中碳的分析方法综述[J].分析仪器,2018(4):8-15. 被引量：3
9齐东子,陈东平,沈文杰.高频燃烧-红外分析仪测定海洋沉积物的总碳含量[J].理化检验：化学分册,2019,55(7):791-795. 被引量：4
10常国梁,刘攀,张毅.高频感应燃烧-红外吸收光谱法测定蒙乃尔镍铜合金中碳[J].冶金分析,2020,40(7):16-21. 被引量：7
1刘勇,王怀胜,沈岚,飞跃.金属铍中杂质元素的ICP-AES分析方法研究[J].原子能科学技术,2003,37(z1):173-175. 被引量：2
2程振祥,张树君,宋峰,郭红沧,仪修杰,韩建儒,陈焕矗.NaY(WO_4)_2:Tm,Yb晶体的上转换发光[J].压电与声光,2001,23(5):387-390. 被引量：2
3石无鱼.另类生命由硼构成[J].大科技：科学之谜（A）,2013(7):28-29.
4魏志华.燃烧气体容量法测定碳量的不确定度评定[J].现代计量测试,1999,7(5):47-52. 被引量：3
5纪新华,李英秋,王林,吴梅.清洗方式对低碳铀切屑样品中碳量测定的影响[J].核化学与放射化学,2012,34(3):189-192.
6方彦霞,齐白羽,张彦翠,展之旺.电感耦合等离子体原子发射光谱法同时测定铍冶炼过程中的铍、铁、铝和硅[J].理化检验：化学分册,2016,52(1):80-82. 被引量：3
7原志明,李红玉,王学瑞,李海鸣.球墨铸铁中碳硫的红外光谱分析法的改进[J].河南化工,2010,27(3):62-63. 被引量：1
8宋海峰,刘海风.金属铍热力学性质的理论研究[J].物理学报,2007,56(5):2833-2837. 被引量：7
9纪新华,李英秋,王林,吴梅.清洗方法对低碳铀切屑样品中碳量测定的影响[J].中国工程物理研究院科技年报,2006(1):493-493.
10邢华宝,徐汾兰,胡正阳,孙雪松.钢铁中超低碳的分析[J].冶金分析,2004(z1):437-438.
Basic Information:
DOI：
Chinese Library Classification Number:O657.33[理学—分析化学]
Citation Information:
The factors affecting carbon determination in beryllium metal were studied by high-frequency heating infrared absorption spectrometry. The influences of fluxes on carbon release from beryllium powder were emphatically investigated such as tungsten and tin particles, and tungsten and copper particles. The results show that carbon can be completely released under the conditions of 100 mg beryllium powder sam- ple and 1.8 g tungsten and tin particles as the flux. When the carbon content in beryllium powder is 800μg/g,the relative standard deviation is less than 4. 0%, and the standard recovery of carbon is 980/00 102%.
quote
| GB/T 7714-2015 | [1] JI Xin-hua, ZOU Le-xi, LI Ying-qiu, et al. Determination of Carbon Content in Beryllium by High-frequency Heating Infrared Absorption Spectrometry[J]. Rare Metals and Cemented Carbides, 2012(3): 63-66. |
| MLA | [1] JI Xin-hua, et al., "Determination of Carbon Content in Beryllium by High-frequency Heating Infrared Absorption Spectrometry." Rare Metals and Cemented Carbides, no. 3, 2012, pp. 63-66. |
| APA | [1] JI Xin-hua, ZOU Le-xi, LI Ying-qiu, WANG Lin, & WU Mei. (2012). Determination of Carbon Content in Beryllium by High-frequency Heating Infrared Absorption Spectrometry. Rare Metals and Cemented Carbides(3), 63-66. |
| IEEE | [1] JI Xin-hua, ZOU Le-xi, LI Ying-qiu, WANG Lin, and WU Mei, "Determination of Carbon Content in Beryllium by High-frequency Heating Infrared Absorption Spectrometry," Rare Metals and Cemented Carbides, no. 3, pp. 63-66, 2012. keywords: {beryllium metal;flux;carbon amount determination;infrared absorption} |