Study on Preparation and Microstructure of Porous Ti-Nb-Zr-CPP Biomaterials AITranslate
Abstract AITranslate
Ti-Nb-Zr-CPP （calcium pyrophosphate） composite was prepared by mechanical alloying and spark plasma sintering,and then the composite was leached in solution to obtain porous biomaterials. Anal- ysis was made of phase and surface area composition of the sintered body,and morphology, relative densi- ty,hardness,pore size and porosity of the leached material. The results show that the porous biomaterials similar with the human skeleton surface can be prepared,with Ti-35GNb-7GZr-10%CPP as the composi- tion formula and 40%H3PO4 ＋60%H20 as the leaching solution.
KeyWords AITranslate
1Mitsuo Niinomi. Recent research and developmenl in ti- tanium alloys for biomedical appliealions and heahhcare goods[J]. Science and Technology of Advanced Materi- als. 2003..1: 415-454.
2Sopyan I, Mel M. Khalid K A. Porous hydroxyapatite for artificial bone applications[J]. Science and TechnoI- ogy of Advanced Materials, 2007. 8:116 123.
3Bansiddhi A, Sargeant T D, Smpp S I, el al. Porous NiTi for bone impants: a review[J]. Acta Biomateria- lia,2008, 4: 773-782.
4Vassilis Karageorgiou,David Kal)lan. Porosity of 3D bio-material scaffolds and osteogenesis[J]. Biomaterials, 2005, 26:5 474-5 491.
5Davide Zaffe, Carlo Bertoldi, Ugo Consolo. Accumula- tion of aluminium in lamellar bone after implantation of titanium plates, Ti-6A1-4V screws, hydroxyapatite gran- ules[J]. Biomaterials, 2004, 25.. 3 837-3 844.
6Hryniewcz T, Rokicki R, Rokosz li. Corros{on and sur-face characterization of titanium biomaterial after mag- netoelectropolishing[J]. Surface Coations Technolo- gy, 2009, 203:1 508-1 515.
7Kuroda D, Niinomi M, Morinaga M, mechanical properties of new/? type t implant materials[J]. Mater Sci Eng 244-249 et al. Design and itanium alloys for ng A,1998, 243:.
1周晓璐,李伟,张帅,孔纪.生物医用多孔钛及钛合金制备技术的研究现状[J].材料研究与应用,2015,9(1):6-10. 被引量：5
2郭雨佳,于景媛,赵特,陈明华,李强,孙旭东.离心-凝胶注模技术制备Ti/HA梯度复合材料[J].稀有金属与硬质合金,2019,47(6):42-47.
1张博文,马北越,尹月,李世明,于景坤,曲选辉.SPS制备陶瓷及钛合金材料的新进展[J].耐火材料,2017,51(2):157-160. 被引量：2
2冯辰栋,夏宇,李祥,王成焘.3D打印多孔钛支架微观孔隙结构和力学性能[J].医用生物力学,2017,32(3):256-260. 被引量：18
3赵庆红,郭俊卿,高琰,高宁,王荣杰.3D打印技术在医疗领域的应用价值与展望[J].机械设计与制造工程,2018,47(6):1-5. 被引量：8
4纪飞飞.多孔钛合金切削加工参数优化试验研究[J].机械工程师,2020(12):75-78. 被引量：1
5陈宏,丁健,陈永楠,邢亚哲,郝建民.钛合金微弧氧化生物膜制备与性能研究[J].表面技术,2021,50(3):45-50. 被引量：4
1柴丽华,陈玉勇,张来启,林均品.烧结温度对快速凝固TiAl合金组织及力学性能的影响(英文)[J].中国有色金属学报：英文版,2012,22(3):528-533. 被引量：1
2陆岩（摘）.欧洲镀锡板产业陷入困境[J].轧钢,2007,24(5):55-55.
3梅钢冷轧T—5料生产首次实现零孔洞率目标[J].轧钢,2010(5):12-12.
4孙锐,刘鑫旺,李橙,戴尚,樊自田,殷君,唐丽娜.等离子烧结AlCoCrFeNiTi_(0.5)/Al复合材料的组织和性能[J].特种铸造及有色合金,2016,36(3):274-277. 被引量：7
5曾涛,焦林,朱达川,杨晨.合金元素Se、Te对铜合金摩擦磨损性能的影响[J].热加工工艺,2015,44(8):46-49.
6吴全兴.形状任意的钛多孔生物材料的应用研究[J].钛工业进展,2017,34(1):46-46.
7LIAN Jiqiong,MENG Jie,JIA Chengchang.Influence of process control agents on the performance of Ni_3Al by mechanical alloying[J].稀有金属：英文版,2008,27(6):648-651.
8凌自成,闫翠霞,史庆南,冯中学,曲永冬,李涛,杨应湘.球磨时间对石墨烯/铜复合材料组织和性能的影响[J].稀有金属材料与工程,2017,46(1):207-212. 被引量：13
9熊博文,龙文元,陈哲,万红,严有为.W和W-Mo对等离子烧结Nb／Nb5Si3复合材料显微组织的影响[J].稀有金属材料与工程,2009,38(6):1112-1115. 被引量：4
10徐健建,颜建辉,汪异,刘龙飞,王跃明.W对Mo-Si-B合金微观组织和力学性能的影响[J].材料热处理学报,2015,36(8):22-27. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TG146.4[金属学及工艺—金属材料]
Citation Information:
Ti-Nb-Zr-CPP （calcium pyrophosphate） composite was prepared by mechanical alloying and spark plasma sintering,and then the composite was leached in solution to obtain porous biomaterials. Anal- ysis was made of phase and surface area composition of the sintered body,and morphology, relative densi- ty,hardness,pore size and porosity of the leached material. The results show that the porous biomaterials similar with the human skeleton surface can be prepared,with Ti-35GNb-7GZr-10%CPP as the composi- tion formula and 40%H3PO4 ＋60%H20 as the leaching solution.
quote
| GB/T 7714-2015 | [1] MA Yan-hua, YU Ji-dao, JIN Xiang-mei. Study on Preparation and Microstructure of Porous Ti-Nb-Zr-CPP Biomaterials[J]. Rare Metals and Cemented Carbides, 2013(3): 16-19. |
| MLA | [1] MA Yan-hua, et al., "Study on Preparation and Microstructure of Porous Ti-Nb-Zr-CPP Biomaterials." Rare Metals and Cemented Carbides, no. 3, 2013, pp. 16-19. |
| APA | [1] MA Yan-hua, YU Ji-dao, & JIN Xiang-mei. (2013). Study on Preparation and Microstructure of Porous Ti-Nb-Zr-CPP Biomaterials. Rare Metals and Cemented Carbides(3), 16-19. |
| IEEE | [1] MA Yan-hua, YU Ji-dao, and JIN Xiang-mei, "Study on Preparation and Microstructure of Porous Ti-Nb-Zr-CPP Biomaterials," Rare Metals and Cemented Carbides, no. 3, pp. 16-19, 2013. keywords: {porous biomaterial;Ti-Nb-Zr-CPP;powder metallurgy;spark plasma sintering;leaching} |